Originally Posted by nickt1862
I don't know about the non-modular thing - here's an now older photo of my 690 II advanced rig with my modded from Corsair rubber grommets which had a NON-modular PSU in it. If one takes the time to secure the PSU cables in the back of the mobo tray in that case it's no problem.
That's nice and all, but my front looks just as clean minus the gromets. I'd love to see 2 pictures from the back with the back side panel off, 1 picture like the one you posted from a meter away and another one from the side to see if cables stick out (especially the molex cables). I'd also like to know how many extra cables you had from the Zalman PSU in that pic....
For example i have 1 extra molex cable, 1 extra SATA power cable, 1 extra ATX 8 pin 12V cable, besides the other cables which are connected like the shorter molex cable which is connected to 3 fans, the other SATA power cable which i have connected to the HDD, the 2 PCI-E (1x 6 pin and 1x 6+2 pin), the ATX 24 pin cable and the EPS 12 V 8 pin cable..... all of which i had to store/route in the space between the mobo tray the the side panel, but i ended up storing the extra cables in the lower HDD caddies......Imo the 690II's space behind the mobo is not big enough.Edited by Pentdragon - 8/16/11 at 11:18pm