Originally Posted by Ragsters
Did you ever make that filter box? Also what did you use for that plate to cover up 5.25" drive bays?
Have not made the filter box yet, still working that one out. Trying to figure out the best method to make it clean and look like it was meant to be there.
The plate over the drive bays is an acrylic plate that I made and covered with white 3M Di Noc.
If anything goes well next week, it will be back together for the final time and the filter box will be worked out. I still want to use the stock filters, but at this point I'm not sure if that is going to work out as planned, I'll get it figured out. Need to call it quits on this one so that I can finish the design and start some work on the next one.
OK, just finished the design for the filter holding apparatus, and it still uses the stock filters. Going to have to figure out what to make it out of still, but I'm kind of leaning toward aluminum, thinking that it will blend best, but not sure just yet. should be interesting.
Can't seem to stop myself.
Decisions have been made, Choices have been chosen and designs have come forth.
Good things to come.Edited by ShortAlieN - 3/14/12 at 12:12am