Overclock.net › Forums › Components › Power Supplies › Will my power supply work with my pre-built PC?
New Posts  All Forums:Forum Nav:

Will my power supply work with my pre-built PC?

post #1 of 6
Thread Starter 
My power supply is a "Rosewill RV2-700 700W ATX12V v2.3 / EPS12V SLI Ready Power Supply" Link: http://www.newegg.com/Product/Produc...82E16817182173
will this work with the HP pavilion p6367c, I have checked it out and it seems to work but I am not s 100% sure and would like a 2nd opinion.
Link for the desktop: http://h10025.www1.hp.com/ewfrf/wc/d...=4120625#N1080
Thankyou for any help you have, also any tips tht you think I should know about replacing a power supply?
post #2 of 6
How many pins is the power input on your MoBo?
24 is usually the standard for newer PCs
old ones had 20 pins but they do make adapters for this sort of thing.
post #3 of 6
Quote:
Originally Posted by Hazzeedayz View Post
How many pins is the power input on your MoBo?
24 is usually the standard for newer PCs
old ones had 20 pins but they do make adapters for this sort of thing.
Doesn't matter. The PSU has the 20- and 4-pin connections separate so it can be used with either.

OP, you're good. There aren't really any tips for swapping PSUs. Just unplug everything, take out the old one, put in the new, and plug stuff back in.
post #4 of 6
Quote:
Originally Posted by t-ramp View Post
Doesn't matter. The PSU has the 20- and 4-pin connections separate so it can be used with either.

OP, you're good. There aren't really any tips for swapping PSUs. Just unplug everything, take out the old one, put in the new, and plug stuff back in.
lol stop makin me look bad yo :slap:
post #5 of 6
Thread Starter 
Quote:
Originally Posted by t-ramp View Post
Doesn't matter. The PSU has the 20- and 4-pin connections separate so it can be used with either.

OP, you're good. There aren't really any tips for swapping PSUs. Just unplug everything, take out the old one, put in the new, and plug stuff back in.
Alright so everything checks out?
post #6 of 6
Quote:
Originally Posted by Hazzeedayz View Post
lol stop makin me look bad yo :slap:
Sorry man. I know what it feels like, so don't feel too bad.

Yes, OP, you should be good. Of course, I'm assuming the motherboard uses a standard 20/24-pin connector and a 8-pin (4-pin, maybe) CPU connector. It ought to be a safe assumption, I think. Also, I can't find a picture of the rear of the case - the stock PSU is the standard dimensions, right?
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Power Supplies
Overclock.net › Forums › Components › Power Supplies › Will my power supply work with my pre-built PC?