Did the BESL mod to a old intel c2d 2160. Chip works fine clocked at 2.4 from 1.8. The temp before the mod were idle 40c load 70c. After mod same temps. From what i read max temp for this chip is 62c. Stock heatsink was used. Did intel burn test it passed 5 runs no problems. Should i be worried? I read the temp sensors can be off 15c so that would make max load temp 55c. Is there anyway to double check this. Heatsink was cool to the touch. And i did reapply tim and sink several times.
post #1 of 3
8/18/11 at 10:17am