The SPD tab just shows the SPD
. This doesn't show what the memory is running at, that's the memory tab. You want to go into the bios, set the memory to 1600mhz, voltage to 1.65v, and first timings to 9-9-9-24-2T command rate. Everything else should be on auto. Then you can double check in the memory tab. If it is listed like on the SPD tab, you know the memory is running optimally at the rated specifications.
I assume your rig is overclocked like it's listed, so in this scenario you may need to raise the QPI/DRAM voltage. This is because you're raising the memory frequency and CPU uncore frequency (which should be double the DRAM frequency but you can leave it on auto- no problem) so this voltage might need a bump to remain stable. Prime95 blend test and LinX are great ways to stress for stability with things like this.