nothing terribly exciting over the past few days, it took a while for marine filler to dry, and since then Ive just sanded it a little and decided to pop everything in for a test run. Still a decent amount of work to be done but I'd put it around 40%
Here's a few shots of how its looking at the moment, its actually got some pretty decent cable management potential, I should be able to get everything tucked away in the end
480 money shot, and some of the filler that needs more work in the background
bottom intakes, filters coming soon!
Most likely going to patch that hole, might pop an 80mm fan in there but really dont see the need, I might cover it with some type of hdd bay as well, ideas?
If you havent noticed by now this thing is wall mounted nowhere near a workstation.
cables run from here
heres some idle temps as well
nothing crazy yet, both CPU and GPU need to be reTIMd, PSU needs to be turned around, cpu fan is only running at 0-10%, the four case fans are 800rpm S Flex that do a wonderful job making no sound, but dont make a ton of noise. I anticipate after making those corrections, and making the case air tight to create my wind tunnel, I will see some much better temps.
Load temps seem to run around 25C for the CPU and 50C for the GPUEdited by cj3waker - 1/21/12 at 5:59pm