Aaah, someone from Antwerp too
Yes I know, the edges are roagh... I quickly cut it with a knife... That's the reason..
Actually your right! it must be professional! It's a sponsered build by cooler master them self.. But for now, it's good. In the future I will change it, but you can hardly see the plexi glass in the case
Here are some more pictures of the fanctonroller..
if you want to do this... You must do it with a dremel, a figure saw brakes too easy... So you must file the edges! But be careful... the little bar brakes easily! That was the problem with me.. So I had to glue it back together. and if you file the plexi don't push too hard!
And of course, you need to cut you fancontroller...
(it was dificult for cutting the fancontroller! It was realy hard material!)
And fot mounting.. Just 2 sided tape and drill a hole in the top panel for routing the cables and your done
, simple as that! For the fat 360 rad I will post pics later this day