I honestly love this cooler, but I think I'm gonna move on to another one soon, it just looks... A bit to bland compared to other flaming red (literally) coolers on the market.
Metro 2033 is one of the greatest FPS games ever made. Although not usually recognized as such, due to the horrible state the gaming industry is in, it succeeds largely on its storytelling,...
This is an update of the original Fractal Design Arc Midi. The solid left panel has been replaced by a panel with a plexiglass window and the top USB ports are now USB-3.0. Let me state at the...
I've used this headset extensively for MAG on PS3. The sounds were wonderful, the mic was crisp, and the ability to adjust peoples voice volume is absolutely invaluable. For $100 ( or less ) this...
The Pros
The reason this card is one of the better non-Tahiti 7870s is because of Gigabyte's custom PCB. Gigabyte took the 7870 and replaced it's memory chips with Hynix memory so they perform a...
Guys I want to build a basement in y trooer starting at the back and running to the htoolbox. But how do I bend the metal without a press I want to do as much self thx :d
You can also use a old piece of A/V equipment, or old filing cabinet, ect, and cut the cover. They are pre-bent, pre-painted, and can be found cheap at garage sales, thrift shops, and pawn shops.
it would be easy to bend metal like that, just use a propane torch and heat the metal evenly, bend the metal against a already 90 degree bend and hammer slightly to make it the desired bend and then cool in water to strengthen
The two pin connector is the LED power from the front controller, if you are using your own fans then you probably wont bother using these. The three pin connectors are for fan power/control. There are 3 black/white and 2 brown/black cables, as far as i know (and forgive me if im wrong) these are exactly the same and are powered directly from the case fan controller. Edited by Gillen - 4/24/12 at 8:17pm