Originally Posted by Calado90;15463346
Well people i just came here to say that my trooper is broken. The fan controler and ked controler just stop work from nothing :'(
You really need to check your PSU connector going into the control unit and the Molex connector to another Molex. and Check the four Ground wires on the side of the green controller Panel.
Originally Posted by nickt1862;15463416
What are you trying to do make me jealous?
Enjoy it in great health brother!
no I just wanted to do some myth busting on the Case.. It is bigger than most people think.. Its almost the size of the Haf X inside. It is very large and I don't see a problem with any kind of Mod you want to do with it.
Originally Posted by Calado90;15463509
The Cm logo leds are with the red light and the part of controler leds just dont light up. the fans are spining at max and the front fan leds are working too. I don´t go to RMA the case its just to much work.
Okay.. before you send it off.. Check your four ground wires that go to that top part of the controller. It sounds like a wiring problem or a bad ground so check the two grounds on one side and then the other two on the other side of the Control unit and make sure that they are plugged in and tightened well.
I would RMA the entire case if I were you. If you get to the point that you don't know what to do.. Then RMA the entire case unless you threw away the box and the styrofoam. If you did.. Then contact the Cooler Master Site and contact customer Support. They will send you a new control unit.
But it sounds like a loose connection from the PSU or a Bad Ground that is your major Problem.
Originally Posted by Mkilbride;15465026
Ok, I just got a job, so yeah, def going to grab one of these. Sorry HAF-X, the Storm Trooper calls to me, in my sleep.
You are gonna love this case.. It is so nice you won't believe it.Edited by unimatrixzero - 10/26/11 at 4:03pm