Quote:
Originally Posted by justinwebb 

Quote:
its not about wiring the strips incorrectly if he accidentally wires 12v positive into a ground or something else it can short out the psu and other components, its best to not learn on something expensive. Sure the led's wont be a problem but there are numerous other things that can go wrong with someone inexperienced cutting and soldering.Originally Posted by GoodInk 
You're not going to fry your PC connecting them to your LED switch. It's positive and negative, this LED tape will not run if you have the power backwards. I'll have to look to see what wire is pos and neg on the case's switch. The tricky part is connecting to the switch, I had these open fan headers that I used, but most are not open like I have. The other way would be cutting the connector off and soldering the wires together.

You're not going to fry your PC connecting them to your LED switch. It's positive and negative, this LED tape will not run if you have the power backwards. I'll have to look to see what wire is pos and neg on the case's switch. The tricky part is connecting to the switch, I had these open fan headers that I used, but most are not open like I have. The other way would be cutting the connector off and soldering the wires together.
Well maybe, I was about 10 and took my 3 broken RC cars and made a new one, so maybe wiring just makes sense to me.

























The women are quite beautiful as well 
