Originally Posted by wrenaudrey
This is one tidy, sexy looking rig.
Got some questions:
-The rads you used, how thick are they?
-Are you running push and pull on both rads, if not-what exactly?
In that one, i use 2 EK-CoolStream RAD XT (240mm) one at the top one at the bottom, dimensions (LxWxH): 276x123x47mm.
All fan are in push mode @ 1500rpm mounted with 7mm rubber shroud which seal them to the RAD and incrase slience and the hot air flow exhausting outside the case at the top and the bottom of the case. The 3 other fan are intake for cool air.
On paper you can put easily two 240 rad below 50mm thick with standar 25mm thick fan inside that case without modding or very little. The tricky part is generally the top one depending of your mother board and the height of it mofset cooler and/or ATX connector.
The good news is you can often work you way by slightly shifting the rad thoward you using existing hole or drilling new one.
If you want to go push pull from inside the case you may take a look at slim type fan like Phobya G-Silent 12 Slim Edition 1800rpm (120x120x15mm) or any other below 20mm thick.