Great updates everyone!~
Originally Posted by CrimsonVision
Do any of you guys know if an XSPC EX280 rad with 25 mm fans will fit with an ASUS Sabertooth or Crosshair-V motherboard in this amazing case? I was wondering before I buy it and risk realizing it's a smidge too big if anybody has had expierences with this rad before. Thanks!
i have a 990fx saberkitty i can put a 45mm rad ( alphacool xt45 ) up there. i had to finagle it by my cpu 8pin connector and i have ~ 2mm of space next to my ram. if you can find/use samsung miracle ram though you could easily fit it in push pull... with ANY RAM that sticks over the ram clips you can only do push OR pull.
with sammies only thing in my way would be cpu block mounts ( i do have sammies i can confirm this )
side note you have 2 mounting points for 240 rads. one closer to the mobo, one farther away. i used the farther awayone. you can only use 7 mounting holes. they could of added the 8th but didnt ( as could you drill if you wanted to ) but i find 7 works fine
Originally Posted by Ne1ld0
Well I guess you could say I finally somewhat came around to these case badge things. I didn't want them to mess up the clean look of the case on the outside so I put them on the inside. Since I was able to route the cables with connections to the bottom of the motherboard behind the motherboard, I think this left me a nice place to stick them.
So what do you guys think about placing these here?
Warning: Spoiler! (Click to show)
On a side note, I don't recommend placing the Intel sticker where I did simply because of their "authorized useage of the Intel Logo" which says you are only granted permission to place this on the front of your case. However, I clear didn't follow these orders and I'm not forcing anyone to either. Do as you please at your own risk.
looks good nice idea mine will be on my PSU cover when i make one. intel can stuff it for the price you pay for their product imo