Overclock.net › Forums › Cooling › Air Cooling › [Official] Phanteks PH-TC14PE News, Discussion and Owners thread
New Posts  All Forums:Forum Nav:

[Official] Phanteks PH-TC14PE News, Discussion and Owners thread - Page 68

post #671 of 2766
Quote:
Originally Posted by fjordiales View Post

I have 3570k, oc 4.2 and im getting 1.17v 73 max in stress test(intel burn test, 5 runs, maximum). Mobo p8z77-i. Been reading forums and i think my temps are too hot esp when im @ 4.4(85deg) & 4.5(90deg).
I got gigabyte 670 oc. From what i read in multiple forums ivy bridge can get stubborn with the voltage+LLC combo. Am i doing something wrong with my OC?

4.2GHz @ 1.17v hitting 73c is too hot. I would re-apply the thermal paste and re-seat the cooler if it were me
post #672 of 2766
Quote:
Originally Posted by fjordiales View Post

I have 3570k, oc 4.2 and im getting 1.17v 73 max in stress test(intel burn test, 5 runs, maximum). Mobo p8z77-i. Been reading forums and i think my temps are too hot esp when im @ 4.4(85deg) & 4.5(90deg).
I got gigabyte 670 oc. From what i read in multiple forums ivy bridge can get stubborn with the voltage+LLC combo. Am i doing something wrong with my OC?
How fast does it go to 73c? Reason I ask is if it's in 3-7 minutes your cooler/TIM are the problem. If it's 15, 20, 30 minutes your case is not venting the heated air from cooler out of case properly and this heated air is heating all the air in your case. Then this heated case air is going into your cooler 5, 10, 15c hotter than room temperature and cpu ends up 5, 10, 15c hotter too.
post #673 of 2766
Quote:
Originally Posted by tw33k View Post

4.2GHz @ 1.17v hitting 73c is too hot. I would re-apply the thermal paste and re-seat the cooler if it were me



Here's what i got. i just got back and ran intel burn test in max for 28x. settings are 4.2ghz, offset -0.030, llc regular. do i need to re-apply TIM and reseat cooler?
post #674 of 2766
Before I pull the trigger on the Phanteks, I've got a question. Has anyone managed to get a 38mm thick fan in between the fins? I'm looking at running 2 FHP-141s which happen to be 38mm thick. I know the gap is 33mm, but would it be possible to squeeze it in. Or should I simply shave off a few mm off the fan thickness to make it fit? Or are there any other fans with similar static pressure and airflow that'd fit?
post #675 of 2766
Sorry to tell you but 38mm will not fit. No way. The distance between radiators is 33mm max.
post #676 of 2766
Quote:
Originally Posted by fjordiales View Post


Here's what i got. i just got back and ran intel burn test in max for 28x. settings are 4.2ghz, offset -0.030, llc regular. do i need to re-apply TIM and reseat cooler?

You said your load vcore was 1.17v not 1.224v. Temps are about right. Your chip would benefit from de-lidding and some Coollabs Liquid Ultra or Pro
post #677 of 2766
Quote:
Originally Posted by fjordiales View Post

I have 3570k, oc 4.2 and im getting 1.17v 73 max in stress test(intel burn test, 5 runs, maximum). Mobo p8z77-i. Been reading forums and i think my temps are too hot esp when im @ 4.4(85deg) & 4.5(90deg).
I got gigabyte 670 oc. From what i read in multiple forums ivy bridge can get stubborn with the voltage+LLC combo. Am i doing something wrong with my OC?

you might try re-seating your heatsink. that seems a bit warm. if you re-seat - rub paste into each surface, then wipe the excess off and put a grain of uncooked rice sized piece and press the heatsink onto the proc and as it tightens it will do the rest.

but you are not doing any thing wrong. it took me months of tinkering to get my overclock right.

Also post up on your mother board's club thread and see what others have for their overclocks. its a good place to start and its what got me going thumb.gif
The Donbot
(12 items)
 
Crushinator
(10 items)
 
Lenovo T450S
(6 items)
 
CPUMotherboardGraphicsRAM
i5 2320 Asrock H61M-VG4 EVGA GTX 970 8gig Samsung LowPro 
Hard DriveMonitorKeyboardPower
Samsung 840 Evo 250gb/WD Black 640gb Asus 24 inch (1080p) Sades Mechanical w/blues Rosewill Hive 550 
CaseMouse
Apevia X-ENERQ Pink Logitec G100s 
CPUMotherboardGraphicsRAM
i5 5300u @ 2.90 Lenovo HD Graphics 5500 12 gigs 
Hard DriveOS
Samsung 250g SSD Windows 10 
  hide details  
Reply
The Donbot
(12 items)
 
Crushinator
(10 items)
 
Lenovo T450S
(6 items)
 
CPUMotherboardGraphicsRAM
i5 2320 Asrock H61M-VG4 EVGA GTX 970 8gig Samsung LowPro 
Hard DriveMonitorKeyboardPower
Samsung 840 Evo 250gb/WD Black 640gb Asus 24 inch (1080p) Sades Mechanical w/blues Rosewill Hive 550 
CaseMouse
Apevia X-ENERQ Pink Logitec G100s 
CPUMotherboardGraphicsRAM
i5 5300u @ 2.90 Lenovo HD Graphics 5500 12 gigs 
Hard DriveOS
Samsung 250g SSD Windows 10 
  hide details  
Reply
post #678 of 2766
He's running IBT with a vCore of 1.224v. His temps are normal for a 3570K
post #679 of 2766
Hi guys,I bought liquid ultra and ty 143 for PH-TC14PE. After installation ,sharing the results


Bulgur's Rig
(16 items)
 
  
CPUMotherboardGraphicsRAM
Intel 2500K ASUS P8Z68-V PRO PowerColor AX6850 1GBD5-DH CrossFire Samsung 3V4G3D/US [ CL9 - 2133 Mhz - 16 Gb ] 
Hard DriveCoolingCoolingOS
Ocz Vertex 4 128 Gb  Phanteks PH-TC14PE Arctic Cooling Extreme Plus [CrossFıre] Windows 7 64Bit 
MonitorKeyboardPowerCase
Yamakasi Catleap Q2703 Razer Lycosa |Silverstone Strider Gold 1000W ST1000G  Corsair Vengeance C70 
MouseMouse PadAudioOther
Razer DeathAdder  Razer Ironclad Edifier M3200  Scythe Kaze Master Pro 
  hide details  
Reply
Bulgur's Rig
(16 items)
 
  
CPUMotherboardGraphicsRAM
Intel 2500K ASUS P8Z68-V PRO PowerColor AX6850 1GBD5-DH CrossFire Samsung 3V4G3D/US [ CL9 - 2133 Mhz - 16 Gb ] 
Hard DriveCoolingCoolingOS
Ocz Vertex 4 128 Gb  Phanteks PH-TC14PE Arctic Cooling Extreme Plus [CrossFıre] Windows 7 64Bit 
MonitorKeyboardPowerCase
Yamakasi Catleap Q2703 Razer Lycosa |Silverstone Strider Gold 1000W ST1000G  Corsair Vengeance C70 
MouseMouse PadAudioOther
Razer DeathAdder  Razer Ironclad Edifier M3200  Scythe Kaze Master Pro 
  hide details  
Reply
post #680 of 2766
Quote:
Originally Posted by OneTreeHill View Post

Hi guys,I bought liquid ultra and ty 143 for PH-TC14PE. After installation ,sharing the results

thumb.gif Have them on my red TC14PE. Assume you know the spring clip pins won't work, but some small zip-ties make quick work of that problem for me. wink.gif

Assume you are using TY-140's for case cooling?

I have 3x TY-140's cooling case too.thumb.gif
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Air Cooling
Overclock.net › Forums › Cooling › Air Cooling › [Official] Phanteks PH-TC14PE News, Discussion and Owners thread