Originally Posted by JMatzelle3
Why does corsair put the weird looking stand off in the middle is that just a easier way to keep the board in line. Do you have to put anything on top of that.
Also i have a padded i/o so is it safe to push the motherboard against it to line it up?
This is the Gigabyte UP5
I used pliers to get it out. Don't want to risk it shorting anything out, it simply unscrews.
Originally Posted by Conspiracy
for anyone trying to fit an H100 in a 300R. i found this photo that is very helpful. i havent not yet decided on my next cooler but this makes me at least consider H100 again
Why would you use a soldering iron to cut o_O Use a dremel or something, even a hacksaw.
Originally Posted by pc-illiterate
samsung green ram aka wonder ram should sit low enough it should clear e z pee zee
i had the same problem with all other ram before i bought the samsung killers
Absolutely, the Samsung RAM really helps with tight fits
Originally Posted by vonss
I'm glad that I found this club!
I only have one negative thing to said about my 400R; the left side panel screw hole on the chassis is "distorted/loset" so the thumb screw does not tightens anymore.
Contact Corsair about it, they're typically very good about stuff like this. Alternatively, find a thumbscrew from your motherboard or PSU, it's usually the exact same thumbscrews