Originally Posted by LongHairedLoser
What exactly did you add to your case and how did you do it (be specific). If I can add a LEDs to the 400r and connect them to the switch I would like to know how.
I didn't add anything to the case, or neither modyfied the fancontroller/lightningswitch, only put the wires from the Ledstrip in the orri 500R fan-connector (see picture) :
The 500R fan-connector have differend Pinout than a Normal fan connector or mainboard Pinout !!!
mostly you get a black and red wire on the ledstrip, just solder a 3 pin connector on it
(watch + and - from leds or it wont work test it before solding
if it dont work switch red and black
you can use an old "powerled connector" it will fit nicely.
now solder RED from LED strip to the GREEN wire
and the BLACK from LED strip to the WHITE wire
And then plug it in on your free connector from the ORRI 500r fancontroller