Quote:
Originally Posted by n1cK5677Â 
I have a tx750, and the 8-pin routed just fine...i could feed it through the hole closer to the PSU if i need more slack (which I likely won't need unless I get a custom loop, which I plan on doing) BTW @Rognin should those rads fit okay into a 400R or should I mount the dual rad externally? Furthermore, what length of tubing did you use? I'm quite curious about the Nat-inator...

I have a tx750, and the 8-pin routed just fine...i could feed it through the hole closer to the PSU if i need more slack (which I likely won't need unless I get a custom loop, which I plan on doing) BTW @Rognin should those rads fit okay into a 400R or should I mount the dual rad externally? Furthermore, what length of tubing did you use? I'm quite curious about the Nat-inator...
I dunno about the 400R. People complain the the H100 is a tight fit and the rad is 27mm thick, and the BI Stealth's are 31mm thick.
When I start up a new build I always buy 10ft (3.5m) of tubing minimum. For one, I need to cut it in 3 to start off for rad flushing. I use pumps to flush the rads; I find it easier and more reassuring when I finally see no more flux in the sink. Then cut it up to fit within the case for blocks, pumps and rads. You never know when you'll screw something up, and for the price you pay tubing I say get a little extra. Having to wait the extra shipping days cause you're missing some and you can't finish is a phobia of mine, that and not having a working computer to play with.
Shoot away, I'll answer any questions to the best of my knowledge!
Edited by Rognin - 1/14/12 at 1:09pm





























I'm starting to regret buying the 400r
Should I be feeling this way 









