Overclock.net › Forums › Graphics Cards › NVIDIA › 580 Overclock went back over.
New Posts  All Forums:Forum Nav:

580 Overclock went back over. - Page 2

post #11 of 20
what temps are you getting? its all about your temp with 580s i can do 1000 at +120mV with a closed case, but when I bench and get some good fans blowing at the back of the card and across the pcb i can get a stable 1k with +50mV
post #12 of 20
Furmark is a useless test to run with your card. It has over current protection (OCP) which throttles the clocks down to 405Mhz core when it sense programs that Nvidia deems "power viruses" such as Furmark, OCCT GPU test, Kombuster etc. For stability testing I like Unigene Heaven, whatever the most stressful games you have are, and 3d Mark11
Edited by juano - 10/3/11 at 5:40am
Main Rig
(16 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7 2700k ASUS P8P67 WS Revolution EVGA 980 Ti SC+ Samsung 4x4GB DDR3 1866MHz 
Hard DriveHard DriveOptical DriveCooling
Samsung 850 Evo 1TB Samsung Spinpoint F4 2TB Samsung BD Combo Noctua NH-D14 
OSMonitorPowerCase
Windows 10 64 bit Asus PG279Q Kingwin Lazer Platinum 1000W Silverstone Raven RV03 
  hide details  
Reply
Main Rig
(16 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7 2700k ASUS P8P67 WS Revolution EVGA 980 Ti SC+ Samsung 4x4GB DDR3 1866MHz 
Hard DriveHard DriveOptical DriveCooling
Samsung 850 Evo 1TB Samsung Spinpoint F4 2TB Samsung BD Combo Noctua NH-D14 
OSMonitorPowerCase
Windows 10 64 bit Asus PG279Q Kingwin Lazer Platinum 1000W Silverstone Raven RV03 
  hide details  
Reply
post #13 of 20
as Juano said, especially graphic test 4 in 3d11, if it passes that it will pass the whole 3dmark, heaven on extreme usually needs +15-20mV then 3dmark 11 to get stable
post #14 of 20
Quote:
Originally Posted by Khalam View Post
as Juano said, especially graphic test 4 in 3d11, if it passes that it will pass the whole 3dmark, heaven on extreme usually needs +15-20mV then 3dmark 11 to get stable
Indeed, I usually have to back down my clocks 10MHz or so in order to pass Unigine Heaven; no more room for voltage increases on my end without a hard mod.

It sounds like you need to keep track of temps, as K mentioned in an earlier post, and to up the voltage if your temps are fine.

If your scores drop once you go past a certain OC, it's probably because your card downclocked due to heat or voltage issues.
    
CPUMotherboardGraphicsRAM
Intel Core i7 3930K Rampage IV Extreme EVGA GTX 580 16GB G.Skill Ripjaws 
Hard DriveOptical DriveOSMonitor
Vertex 4 256GB; 1 x WD 1TB Black Asus 24X DVD-RW Windows 8 Pro/OS X 10.8.2/Mint 13 BenQ G2400WD 
KeyboardPowerCaseMouse
Das Professional Silent S Enermax 1250W Silverstone TJ07 Logitech G500 
Audio
Creative Titanium HD 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Intel Core i7 3930K Rampage IV Extreme EVGA GTX 580 16GB G.Skill Ripjaws 
Hard DriveOptical DriveOSMonitor
Vertex 4 256GB; 1 x WD 1TB Black Asus 24X DVD-RW Windows 8 Pro/OS X 10.8.2/Mint 13 BenQ G2400WD 
KeyboardPowerCaseMouse
Das Professional Silent S Enermax 1250W Silverstone TJ07 Logitech G500 
Audio
Creative Titanium HD 
  hide details  
Reply
post #15 of 20
It'll downclock itself if you go too high.
Up the voltage and if that doesn't work, bring down the core clock.

Your goal is to reach a stable overclock that scores MAXIMUM points on a benchmark at safe temps
(Unless your doing it for simple fps improvements, but then there's no need to go past 900MHz IMHO).
Edited by Varrkarus - 10/3/11 at 7:01am
    
CPUMotherboardGraphicsRAM
[Intel] i5 2500K - 4.5GHz @ 1.27v [Asus] P8P67-Pro [Asus] GTX580 DirectCU II 900/1800/2100 @ 1.088v [G.Skill] Ripjaws-X 8GB 1600 CL8 
Hard DriveHard DriveOptical DriveCooling
[Crucial] M4 64GB SSD [Samsung] Spinpoint F3 1TB [Pioneer] DVR-219L [Noctua] NH-D14 
OSMonitorMonitorKeyboard
[Windows] 7 Ultimate 64-bit [Dell] U2711 27" [Dell] 1907FP 19" [Microsoft] Digital Media Keyboard 
PowerCaseMouseMouse Pad
[Corsair] HX-750 [NZXT] Phantom - White [Acer] Generic Mouse Wooden Desk 
AudioAudioAudio
[Soloman] 2.1 Set [Audio-Technica] ATH-M50 [Zalman] ZM-MIC1 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
[Intel] i5 2500K - 4.5GHz @ 1.27v [Asus] P8P67-Pro [Asus] GTX580 DirectCU II 900/1800/2100 @ 1.088v [G.Skill] Ripjaws-X 8GB 1600 CL8 
Hard DriveHard DriveOptical DriveCooling
[Crucial] M4 64GB SSD [Samsung] Spinpoint F3 1TB [Pioneer] DVR-219L [Noctua] NH-D14 
OSMonitorMonitorKeyboard
[Windows] 7 Ultimate 64-bit [Dell] U2711 27" [Dell] 1907FP 19" [Microsoft] Digital Media Keyboard 
PowerCaseMouseMouse Pad
[Corsair] HX-750 [NZXT] Phantom - White [Acer] Generic Mouse Wooden Desk 
AudioAudioAudio
[Soloman] 2.1 Set [Audio-Technica] ATH-M50 [Zalman] ZM-MIC1 
  hide details  
Reply
post #16 of 20
Thread Starter 
Temps are like 53 at 925 @ 1100Mv
^3
(11 items)
 
   
CPUMotherboardGraphicsRAM
Intel Core i7 5930K  EVGA x99 Micro EVGA GTX 980 SC ACX 16GB Corsair DDR4 Vengeance LPX Black PC4-21300 
Hard DriveCoolingOSMonitor
500GB Samsung 840 EVO H105 Win 10 ASUS ROG PG279 
KeyboardPowerCase
Ducky Shine 1 MX-Red Corsair AX 860i  Fractal Design Node 804 Black 
CPUGraphicsRAMHard Drive
Core i7 @ 2.6  GT650 16GB of 1600 MHz DDR3L SDRAM 256GB SSD 
OSMonitorKeyboard
Mac OSX Lion Retina Display US layout 
  hide details  
Reply
^3
(11 items)
 
   
CPUMotherboardGraphicsRAM
Intel Core i7 5930K  EVGA x99 Micro EVGA GTX 980 SC ACX 16GB Corsair DDR4 Vengeance LPX Black PC4-21300 
Hard DriveCoolingOSMonitor
500GB Samsung 840 EVO H105 Win 10 ASUS ROG PG279 
KeyboardPowerCase
Ducky Shine 1 MX-Red Corsair AX 860i  Fractal Design Node 804 Black 
CPUGraphicsRAMHard Drive
Core i7 @ 2.6  GT650 16GB of 1600 MHz DDR3L SDRAM 256GB SSD 
OSMonitorKeyboard
Mac OSX Lion Retina Display US layout 
  hide details  
Reply
post #17 of 20
Quote:
Originally Posted by andrewmchugh View Post
Temps are like 53 at 925 @ 1100Mv
Then the voltage is probably just too low.
    
CPUMotherboardGraphicsRAM
[Intel] i5 2500K - 4.5GHz @ 1.27v [Asus] P8P67-Pro [Asus] GTX580 DirectCU II 900/1800/2100 @ 1.088v [G.Skill] Ripjaws-X 8GB 1600 CL8 
Hard DriveHard DriveOptical DriveCooling
[Crucial] M4 64GB SSD [Samsung] Spinpoint F3 1TB [Pioneer] DVR-219L [Noctua] NH-D14 
OSMonitorMonitorKeyboard
[Windows] 7 Ultimate 64-bit [Dell] U2711 27" [Dell] 1907FP 19" [Microsoft] Digital Media Keyboard 
PowerCaseMouseMouse Pad
[Corsair] HX-750 [NZXT] Phantom - White [Acer] Generic Mouse Wooden Desk 
AudioAudioAudio
[Soloman] 2.1 Set [Audio-Technica] ATH-M50 [Zalman] ZM-MIC1 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
[Intel] i5 2500K - 4.5GHz @ 1.27v [Asus] P8P67-Pro [Asus] GTX580 DirectCU II 900/1800/2100 @ 1.088v [G.Skill] Ripjaws-X 8GB 1600 CL8 
Hard DriveHard DriveOptical DriveCooling
[Crucial] M4 64GB SSD [Samsung] Spinpoint F3 1TB [Pioneer] DVR-219L [Noctua] NH-D14 
OSMonitorMonitorKeyboard
[Windows] 7 Ultimate 64-bit [Dell] U2711 27" [Dell] 1907FP 19" [Microsoft] Digital Media Keyboard 
PowerCaseMouseMouse Pad
[Corsair] HX-750 [NZXT] Phantom - White [Acer] Generic Mouse Wooden Desk 
AudioAudioAudio
[Soloman] 2.1 Set [Audio-Technica] ATH-M50 [Zalman] ZM-MIC1 
  hide details  
Reply
post #18 of 20
Thread Starter 
Quote:
Originally Posted by juano View Post
Furmark is a useless test to run with your card. It has over current protection (OCP)
I was saying that I can see the core staying at the set freq in furmark.

Quote:
Originally Posted by Varrkarus View Post
Then the voltage is probably just too low.
I cant set the voltage any higher in MSI, I think I would have to flash it to unlock the voltages.
^3
(11 items)
 
   
CPUMotherboardGraphicsRAM
Intel Core i7 5930K  EVGA x99 Micro EVGA GTX 980 SC ACX 16GB Corsair DDR4 Vengeance LPX Black PC4-21300 
Hard DriveCoolingOSMonitor
500GB Samsung 840 EVO H105 Win 10 ASUS ROG PG279 
KeyboardPowerCase
Ducky Shine 1 MX-Red Corsair AX 860i  Fractal Design Node 804 Black 
CPUGraphicsRAMHard Drive
Core i7 @ 2.6  GT650 16GB of 1600 MHz DDR3L SDRAM 256GB SSD 
OSMonitorKeyboard
Mac OSX Lion Retina Display US layout 
  hide details  
Reply
^3
(11 items)
 
   
CPUMotherboardGraphicsRAM
Intel Core i7 5930K  EVGA x99 Micro EVGA GTX 980 SC ACX 16GB Corsair DDR4 Vengeance LPX Black PC4-21300 
Hard DriveCoolingOSMonitor
500GB Samsung 840 EVO H105 Win 10 ASUS ROG PG279 
KeyboardPowerCase
Ducky Shine 1 MX-Red Corsair AX 860i  Fractal Design Node 804 Black 
CPUGraphicsRAMHard Drive
Core i7 @ 2.6  GT650 16GB of 1600 MHz DDR3L SDRAM 256GB SSD 
OSMonitorKeyboard
Mac OSX Lion Retina Display US layout 
  hide details  
Reply
post #19 of 20
Quote:
Originally Posted by andrewmchugh View Post
I cant set the voltage any higher in MSI, I think I would have to flash it to unlock the voltages.
Then set the core clock down. The voltages seem very high >.>
    
CPUMotherboardGraphicsRAM
[Intel] i5 2500K - 4.5GHz @ 1.27v [Asus] P8P67-Pro [Asus] GTX580 DirectCU II 900/1800/2100 @ 1.088v [G.Skill] Ripjaws-X 8GB 1600 CL8 
Hard DriveHard DriveOptical DriveCooling
[Crucial] M4 64GB SSD [Samsung] Spinpoint F3 1TB [Pioneer] DVR-219L [Noctua] NH-D14 
OSMonitorMonitorKeyboard
[Windows] 7 Ultimate 64-bit [Dell] U2711 27" [Dell] 1907FP 19" [Microsoft] Digital Media Keyboard 
PowerCaseMouseMouse Pad
[Corsair] HX-750 [NZXT] Phantom - White [Acer] Generic Mouse Wooden Desk 
AudioAudioAudio
[Soloman] 2.1 Set [Audio-Technica] ATH-M50 [Zalman] ZM-MIC1 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
[Intel] i5 2500K - 4.5GHz @ 1.27v [Asus] P8P67-Pro [Asus] GTX580 DirectCU II 900/1800/2100 @ 1.088v [G.Skill] Ripjaws-X 8GB 1600 CL8 
Hard DriveHard DriveOptical DriveCooling
[Crucial] M4 64GB SSD [Samsung] Spinpoint F3 1TB [Pioneer] DVR-219L [Noctua] NH-D14 
OSMonitorMonitorKeyboard
[Windows] 7 Ultimate 64-bit [Dell] U2711 27" [Dell] 1907FP 19" [Microsoft] Digital Media Keyboard 
PowerCaseMouseMouse Pad
[Corsair] HX-750 [NZXT] Phantom - White [Acer] Generic Mouse Wooden Desk 
AudioAudioAudio
[Soloman] 2.1 Set [Audio-Technica] ATH-M50 [Zalman] ZM-MIC1 
  hide details  
Reply
post #20 of 20
Quote:
Originally Posted by andrewmchugh View Post
I was saying that I can see the core staying at the set freq in furmark.



I cant set the voltage any higher in MSI, I think I would have to flash it to unlock the voltages.
Just because you can't see it happening doesn't mean that it's not happening. I'm not making this up and your specific reference 580 is not special or immune to this, it's affected same as all the other reference 580s. From the same article I posted before "Real-time clock monitoring does not show the changed clocks". If that article doesn't convince you, it really should but if it doesn't, I have more that will tell you the exact same thing I'm telling you.
Edited by juano - 10/5/11 at 4:22am
Main Rig
(16 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7 2700k ASUS P8P67 WS Revolution EVGA 980 Ti SC+ Samsung 4x4GB DDR3 1866MHz 
Hard DriveHard DriveOptical DriveCooling
Samsung 850 Evo 1TB Samsung Spinpoint F4 2TB Samsung BD Combo Noctua NH-D14 
OSMonitorPowerCase
Windows 10 64 bit Asus PG279Q Kingwin Lazer Platinum 1000W Silverstone Raven RV03 
  hide details  
Reply
Main Rig
(16 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7 2700k ASUS P8P67 WS Revolution EVGA 980 Ti SC+ Samsung 4x4GB DDR3 1866MHz 
Hard DriveHard DriveOptical DriveCooling
Samsung 850 Evo 1TB Samsung Spinpoint F4 2TB Samsung BD Combo Noctua NH-D14 
OSMonitorPowerCase
Windows 10 64 bit Asus PG279Q Kingwin Lazer Platinum 1000W Silverstone Raven RV03 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: NVIDIA
Overclock.net › Forums › Graphics Cards › NVIDIA › 580 Overclock went back over.