Overclock.net › Forums › Overclockers Care › Overclock.net Folding@Home Team › temp logs in linux
New Posts  All Forums:Forum Nav:

temp logs in linux - Page 2

post #11 of 23
Thread Starter 
Quote:
Originally Posted by 0bit View Post
I'd probably be happy with #3. All I ever do now is turn on the tv attached to the folding rig to see if it's still running. If the temps for each core are displayed then it would be awesome.
Cool, do you know if you're running gnome or kde?

If gnome:

If you're on a redhat/fed/cent distro that uses rpm's/yum do a "sudo yum install gnome-applet-sensors"

If you're on ubuntu you can try "sudo apt-get gnome-applet-sensors"

If yum fails you can try downloading the rpm from here: http://rpm.pbone.net/index.php3?stat...&field[]=2, I'm not sure if there's an equivalent to rpm search for ubuntu.

Personally I have 1.7.10 x64 installed, I'm not sure which versions are good/bad, but I'd choose the correct one for your distro and see what happens.

If you're not rpm compatible and apt-get fails, we can try and work out what you do need to do.

Once it's installed, you'll need to add it to one of your panels (top/bottom/side depending on your gui setup). Right click the panel and go to add to panel, choose "Hardware Sensors Monitor", it will now say "No sensors enabled!" Right click on the text and go to preferences. You can choose between text by choosing value only, or a full on graph by choosing graph only. Then go to the sensors tab and expand the libsensors to reveal the cores. Enable each core and then click on properties for each. You'll need to set a threshold for each, e.g. min 0 max 80 for instance. Leave multiplier at 1 and offset at 0.

If KDE then I think I have a work around for you, but I won't work it out quite yet until I know you need it.

Hopefully this helps
     
CPUMotherboardGraphicsRAM
i7-3930k @ 4.?GHz Rampage IV Extreme 2x 8800GT 32GB Dominator GT 2133 CL9 
Hard DriveCoolingOSMonitor
2xX25-E Raid 0, 1xC300 128GB, + Mechanicals DT 5Noz, EK full cover GPU blocks, EK full cove... RHEL 5.5 WS Dell U3011 + 2005WFP Portrait 
PowerCaseMouse
AX1200 CaseLabs TX10-D + Pedestal Razer DeathAdder 
CPUMotherboardGraphicsRAM
3930K@4.8 Rampage IV Extreme GTX580 3GB Tri SLI, GTX460 FizzyX 16GB Samsung SuperOverclockingTiny DDR3 
Hard DriveCoolingOSMonitor
Crucial M4 DT 5Noz, Koolance Full Cover GPU blocks, EK ful... Win 7 64 bit Pro Dell U3011 + 2005WFP 
PowerCaseMouseMouse Pad
EVGA NEX1500 CaseLabs TX10-D + Pedestal Logitech G5 Razer Goliathus 
Audio
Asus Essence One 
  hide details  
Reply
     
CPUMotherboardGraphicsRAM
i7-3930k @ 4.?GHz Rampage IV Extreme 2x 8800GT 32GB Dominator GT 2133 CL9 
Hard DriveCoolingOSMonitor
2xX25-E Raid 0, 1xC300 128GB, + Mechanicals DT 5Noz, EK full cover GPU blocks, EK full cove... RHEL 5.5 WS Dell U3011 + 2005WFP Portrait 
PowerCaseMouse
AX1200 CaseLabs TX10-D + Pedestal Razer DeathAdder 
CPUMotherboardGraphicsRAM
3930K@4.8 Rampage IV Extreme GTX580 3GB Tri SLI, GTX460 FizzyX 16GB Samsung SuperOverclockingTiny DDR3 
Hard DriveCoolingOSMonitor
Crucial M4 DT 5Noz, Koolance Full Cover GPU blocks, EK ful... Win 7 64 bit Pro Dell U3011 + 2005WFP 
PowerCaseMouseMouse Pad
EVGA NEX1500 CaseLabs TX10-D + Pedestal Logitech G5 Razer Goliathus 
Audio
Asus Essence One 
  hide details  
Reply
post #12 of 23
Quote:
Originally Posted by stren View Post
Not sure, I don't use the core hack, maybe therefore there's a better way from that faq, I'll have to check it out sometime

>> edit I misread what you said. I assume if you're using the corehack that you're running a vm and then could monitor (and possibly log?) temps in windows. I'm not sure if the vm player on the host would present the hw temps to the guest OS
No, i'm running ubuntu server 10.10 x64 native. Last time i tried to check the sensors it reported temps of 0C. I never gave it much importance, but would be nice if there was a way of getting actual temps from the chip to troubleshoot potential issues.
I need upgrades
(21 items)
 
  
CPUMotherboardGraphicsRAM
Phenom II X6 1090T Foxconn A79A-S PNY GTS450 XLR8 KVR800D2N6/2G 
Hard DriveHard DriveHard DriveHard Drive
WD2500AAKS WD3200AAKS WD10EARS WD3200JB 
Optical DriveOptical DriveCoolingOS
Asus DRW-1608P2 Asus DRW-1608P2 Corsair H70 Ubuntu Server 10.10 x64 
OSMonitorKeyboardPower
Windows 7 Professional x64 SP1 ASUS VW193S Logitech EX100 LC-Power 650W 
CaseMouseAudioAudio
Coolermaster Stacker 830 SE Logitech EX100 Creative Audigy 2 ZS Creative i-Trigue L3450 
  hide details  
Reply
I need upgrades
(21 items)
 
  
CPUMotherboardGraphicsRAM
Phenom II X6 1090T Foxconn A79A-S PNY GTS450 XLR8 KVR800D2N6/2G 
Hard DriveHard DriveHard DriveHard Drive
WD2500AAKS WD3200AAKS WD10EARS WD3200JB 
Optical DriveOptical DriveCoolingOS
Asus DRW-1608P2 Asus DRW-1608P2 Corsair H70 Ubuntu Server 10.10 x64 
OSMonitorKeyboardPower
Windows 7 Professional x64 SP1 ASUS VW193S Logitech EX100 LC-Power 650W 
CaseMouseAudioAudio
Coolermaster Stacker 830 SE Logitech EX100 Creative Audigy 2 ZS Creative i-Trigue L3450 
  hide details  
Reply
post #13 of 23
Thread Starter 
Quote:
Originally Posted by matroska View Post
No, i'm running ubuntu server 10.10 x64 native. Last time i tried to check the sensors it reported temps of 0C. I never gave it much importance, but would be nice if there was a way of getting actual temps from the chip to troubleshoot potential issues.
Hmmm, if it's reporting 0, then nothing I've done here will change that, all I've done is automate and process the output of sensors to a file suitable for excel. I haven't tried to get the sensors to work on ubuntu, but it was a major pain on redhat on the i7-9XXs that I have. Did you run sensors-detect?
     
CPUMotherboardGraphicsRAM
i7-3930k @ 4.?GHz Rampage IV Extreme 2x 8800GT 32GB Dominator GT 2133 CL9 
Hard DriveCoolingOSMonitor
2xX25-E Raid 0, 1xC300 128GB, + Mechanicals DT 5Noz, EK full cover GPU blocks, EK full cove... RHEL 5.5 WS Dell U3011 + 2005WFP Portrait 
PowerCaseMouse
AX1200 CaseLabs TX10-D + Pedestal Razer DeathAdder 
CPUMotherboardGraphicsRAM
3930K@4.8 Rampage IV Extreme GTX580 3GB Tri SLI, GTX460 FizzyX 16GB Samsung SuperOverclockingTiny DDR3 
Hard DriveCoolingOSMonitor
Crucial M4 DT 5Noz, Koolance Full Cover GPU blocks, EK ful... Win 7 64 bit Pro Dell U3011 + 2005WFP 
PowerCaseMouseMouse Pad
EVGA NEX1500 CaseLabs TX10-D + Pedestal Logitech G5 Razer Goliathus 
Audio
Asus Essence One 
  hide details  
Reply
     
CPUMotherboardGraphicsRAM
i7-3930k @ 4.?GHz Rampage IV Extreme 2x 8800GT 32GB Dominator GT 2133 CL9 
Hard DriveCoolingOSMonitor
2xX25-E Raid 0, 1xC300 128GB, + Mechanicals DT 5Noz, EK full cover GPU blocks, EK full cove... RHEL 5.5 WS Dell U3011 + 2005WFP Portrait 
PowerCaseMouse
AX1200 CaseLabs TX10-D + Pedestal Razer DeathAdder 
CPUMotherboardGraphicsRAM
3930K@4.8 Rampage IV Extreme GTX580 3GB Tri SLI, GTX460 FizzyX 16GB Samsung SuperOverclockingTiny DDR3 
Hard DriveCoolingOSMonitor
Crucial M4 DT 5Noz, Koolance Full Cover GPU blocks, EK ful... Win 7 64 bit Pro Dell U3011 + 2005WFP 
PowerCaseMouseMouse Pad
EVGA NEX1500 CaseLabs TX10-D + Pedestal Logitech G5 Razer Goliathus 
Audio
Asus Essence One 
  hide details  
Reply
post #14 of 23
Thanks stren, I'll check it out when I get home in about two hours. Some of the instructions seem familiar. I believe I'm running ubuntu 10.4, it's the one in Digi's bigbigadv picture guide.
HAF932
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 2600k ASUS P8P67 Deluxe EVGA gtx 450 G.SKILL Ripjaws X 4GB 
Hard DriveOptical DriveOSMonitor
Intel 510 Series 128gb LG Bluray Win 7 64bit S23A950 
PowerCase
Antec TruePower Quattro TPQ-1000 HAF 932 
  hide details  
Reply
HAF932
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 2600k ASUS P8P67 Deluxe EVGA gtx 450 G.SKILL Ripjaws X 4GB 
Hard DriveOptical DriveOSMonitor
Intel 510 Series 128gb LG Bluray Win 7 64bit S23A950 
PowerCase
Antec TruePower Quattro TPQ-1000 HAF 932 
  hide details  
Reply
post #15 of 23
I understand that, you're just using the sensors readings from the os. Dumb question my first

I used a 3rd party software in the gui, but can't remember its name. I think i did run sensors-detect, but i'm not real sure. When i'm near the pc i'll check it out and report back
I need upgrades
(21 items)
 
  
CPUMotherboardGraphicsRAM
Phenom II X6 1090T Foxconn A79A-S PNY GTS450 XLR8 KVR800D2N6/2G 
Hard DriveHard DriveHard DriveHard Drive
WD2500AAKS WD3200AAKS WD10EARS WD3200JB 
Optical DriveOptical DriveCoolingOS
Asus DRW-1608P2 Asus DRW-1608P2 Corsair H70 Ubuntu Server 10.10 x64 
OSMonitorKeyboardPower
Windows 7 Professional x64 SP1 ASUS VW193S Logitech EX100 LC-Power 650W 
CaseMouseAudioAudio
Coolermaster Stacker 830 SE Logitech EX100 Creative Audigy 2 ZS Creative i-Trigue L3450 
  hide details  
Reply
I need upgrades
(21 items)
 
  
CPUMotherboardGraphicsRAM
Phenom II X6 1090T Foxconn A79A-S PNY GTS450 XLR8 KVR800D2N6/2G 
Hard DriveHard DriveHard DriveHard Drive
WD2500AAKS WD3200AAKS WD10EARS WD3200JB 
Optical DriveOptical DriveCoolingOS
Asus DRW-1608P2 Asus DRW-1608P2 Corsair H70 Ubuntu Server 10.10 x64 
OSMonitorKeyboardPower
Windows 7 Professional x64 SP1 ASUS VW193S Logitech EX100 LC-Power 650W 
CaseMouseAudioAudio
Coolermaster Stacker 830 SE Logitech EX100 Creative Audigy 2 ZS Creative i-Trigue L3450 
  hide details  
Reply
post #16 of 23
Quote:
Originally Posted by matroska View Post
Interesting

But if one uses the 'corehack' scripts the sensors won't work, am i right? or does it still read temps?
Quote:
Originally Posted by 0bit View Post
I run the corehack and when I type sensors in one of them terminals it does display the temps of the cores. It doesn't auto update like realtemp in windows, so I stopped using it, that and I'd have to go fine a keyboard everytime I wanted to know.
I use GKrellM to monitor core temps in Ubuntu 11.04. When I use the corefix, it breaks the CPU Load feature, showing 12 cores all at 0% load while folding, but the core temps still report just fine. Since this uses lm-sensors as well, I would think that the op's scripts should work just fine with corefix as well
Edited by gboeds - 10/4/11 at 7:54pm
post #17 of 23
You should also add a notification if the temperature gets too high!
New Build!
(13 items)
 
  
CPUMotherboardGraphicsRAM
Core i5 2500K Gigabyte Z68X-UD5-B3 Sapphire 5770 Microcenter 2x2GB 
Hard DriveOptical DriveOSMonitor
1x64GB SSD, 2TB WD LG Sata DVD+-RW, Sony Blu Ray Windows 7 Enterprise x64 / Debian 6.0 / OSX Samsung SyncMaster P2450 
KeyboardPowerCaseMouse
Logitech Ergo Kingwin 650W CoolerMaster Razer Salmosa 
  hide details  
Reply
New Build!
(13 items)
 
  
CPUMotherboardGraphicsRAM
Core i5 2500K Gigabyte Z68X-UD5-B3 Sapphire 5770 Microcenter 2x2GB 
Hard DriveOptical DriveOSMonitor
1x64GB SSD, 2TB WD LG Sata DVD+-RW, Sony Blu Ray Windows 7 Enterprise x64 / Debian 6.0 / OSX Samsung SyncMaster P2450 
KeyboardPowerCaseMouse
Logitech Ergo Kingwin 650W CoolerMaster Razer Salmosa 
  hide details  
Reply
post #18 of 23
Quote:
root@folding:~# sensors
k10temp-pci-00c3
Adapter: PCI adapter
temp1: +43.2°C (high = +70.0°C)
This is what i get from lm-sensors. I believe this is the GTS450's temp, and not the X6

Gkrellm doesn't help me since i run the server GUI-less gboeds, but thanks for the reccomendation

I feel loke i'm stealing this thread
I need upgrades
(21 items)
 
  
CPUMotherboardGraphicsRAM
Phenom II X6 1090T Foxconn A79A-S PNY GTS450 XLR8 KVR800D2N6/2G 
Hard DriveHard DriveHard DriveHard Drive
WD2500AAKS WD3200AAKS WD10EARS WD3200JB 
Optical DriveOptical DriveCoolingOS
Asus DRW-1608P2 Asus DRW-1608P2 Corsair H70 Ubuntu Server 10.10 x64 
OSMonitorKeyboardPower
Windows 7 Professional x64 SP1 ASUS VW193S Logitech EX100 LC-Power 650W 
CaseMouseAudioAudio
Coolermaster Stacker 830 SE Logitech EX100 Creative Audigy 2 ZS Creative i-Trigue L3450 
  hide details  
Reply
I need upgrades
(21 items)
 
  
CPUMotherboardGraphicsRAM
Phenom II X6 1090T Foxconn A79A-S PNY GTS450 XLR8 KVR800D2N6/2G 
Hard DriveHard DriveHard DriveHard Drive
WD2500AAKS WD3200AAKS WD10EARS WD3200JB 
Optical DriveOptical DriveCoolingOS
Asus DRW-1608P2 Asus DRW-1608P2 Corsair H70 Ubuntu Server 10.10 x64 
OSMonitorKeyboardPower
Windows 7 Professional x64 SP1 ASUS VW193S Logitech EX100 LC-Power 650W 
CaseMouseAudioAudio
Coolermaster Stacker 830 SE Logitech EX100 Creative Audigy 2 ZS Creative i-Trigue L3450 
  hide details  
Reply
post #19 of 23
Thread Starter 
Quote:
Originally Posted by matroska View Post
This is what i get from lm-sensors. I believe this is the GTS450's temp, and not the X6

Gkrellm doesn't help me since i run the server GUI-less gboeds, but thanks for the reccomendation

I feel loke i'm stealing this thread
I'm not familiar with the x6, but for my rigs you had to add in kmod-coretemp to the kernel in order to get sensors to pick up the cpu temps.

There's a guide for installing sensors for ubuntu here: https://help.ubuntu.com/community/SensorInstallHowto which suggests doing
Code:
sudo /etc/init.d/module-init-tools restart
after the sensors-detect. So you may want to doublecheck you did that. However for me without the kmod-coretemp fix sensors-detect couldn't even find the cpu, but that might be more of a redhat/cent thing as I can't find anything about ubuntu and kmod-coretemp. Here's a similar guide to the one I followed for redhat:

http://www.question-defense.com/2010...oretemp-module

Anyone else have ubuntu and an x6 but does get temps from sensors?
     
CPUMotherboardGraphicsRAM
i7-3930k @ 4.?GHz Rampage IV Extreme 2x 8800GT 32GB Dominator GT 2133 CL9 
Hard DriveCoolingOSMonitor
2xX25-E Raid 0, 1xC300 128GB, + Mechanicals DT 5Noz, EK full cover GPU blocks, EK full cove... RHEL 5.5 WS Dell U3011 + 2005WFP Portrait 
PowerCaseMouse
AX1200 CaseLabs TX10-D + Pedestal Razer DeathAdder 
CPUMotherboardGraphicsRAM
3930K@4.8 Rampage IV Extreme GTX580 3GB Tri SLI, GTX460 FizzyX 16GB Samsung SuperOverclockingTiny DDR3 
Hard DriveCoolingOSMonitor
Crucial M4 DT 5Noz, Koolance Full Cover GPU blocks, EK ful... Win 7 64 bit Pro Dell U3011 + 2005WFP 
PowerCaseMouseMouse Pad
EVGA NEX1500 CaseLabs TX10-D + Pedestal Logitech G5 Razer Goliathus 
Audio
Asus Essence One 
  hide details  
Reply
     
CPUMotherboardGraphicsRAM
i7-3930k @ 4.?GHz Rampage IV Extreme 2x 8800GT 32GB Dominator GT 2133 CL9 
Hard DriveCoolingOSMonitor
2xX25-E Raid 0, 1xC300 128GB, + Mechanicals DT 5Noz, EK full cover GPU blocks, EK full cove... RHEL 5.5 WS Dell U3011 + 2005WFP Portrait 
PowerCaseMouse
AX1200 CaseLabs TX10-D + Pedestal Razer DeathAdder 
CPUMotherboardGraphicsRAM
3930K@4.8 Rampage IV Extreme GTX580 3GB Tri SLI, GTX460 FizzyX 16GB Samsung SuperOverclockingTiny DDR3 
Hard DriveCoolingOSMonitor
Crucial M4 DT 5Noz, Koolance Full Cover GPU blocks, EK ful... Win 7 64 bit Pro Dell U3011 + 2005WFP 
PowerCaseMouseMouse Pad
EVGA NEX1500 CaseLabs TX10-D + Pedestal Logitech G5 Razer Goliathus 
Audio
Asus Essence One 
  hide details  
Reply
post #20 of 23
Hmmm, thnx

Will try that.
I need upgrades
(21 items)
 
  
CPUMotherboardGraphicsRAM
Phenom II X6 1090T Foxconn A79A-S PNY GTS450 XLR8 KVR800D2N6/2G 
Hard DriveHard DriveHard DriveHard Drive
WD2500AAKS WD3200AAKS WD10EARS WD3200JB 
Optical DriveOptical DriveCoolingOS
Asus DRW-1608P2 Asus DRW-1608P2 Corsair H70 Ubuntu Server 10.10 x64 
OSMonitorKeyboardPower
Windows 7 Professional x64 SP1 ASUS VW193S Logitech EX100 LC-Power 650W 
CaseMouseAudioAudio
Coolermaster Stacker 830 SE Logitech EX100 Creative Audigy 2 ZS Creative i-Trigue L3450 
  hide details  
Reply
I need upgrades
(21 items)
 
  
CPUMotherboardGraphicsRAM
Phenom II X6 1090T Foxconn A79A-S PNY GTS450 XLR8 KVR800D2N6/2G 
Hard DriveHard DriveHard DriveHard Drive
WD2500AAKS WD3200AAKS WD10EARS WD3200JB 
Optical DriveOptical DriveCoolingOS
Asus DRW-1608P2 Asus DRW-1608P2 Corsair H70 Ubuntu Server 10.10 x64 
OSMonitorKeyboardPower
Windows 7 Professional x64 SP1 ASUS VW193S Logitech EX100 LC-Power 650W 
CaseMouseAudioAudio
Coolermaster Stacker 830 SE Logitech EX100 Creative Audigy 2 ZS Creative i-Trigue L3450 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Overclock.net Folding@Home Team
Overclock.net › Forums › Overclockers Care › Overclock.net Folding@Home Team › temp logs in linux