ok so ima go with white where should i get distilled water?
and its non conductive right? so if it leaks a little my system wont fry
i am gonna run a leak test for a while before i install it got an exta power supply ill just hook it up on my coffee table overnight
Distilled water you can get at the grocery store. like 90 or so cents a gallon.
It is conductive, dont be fooled by the fluids that say they are not conductive, they all will break down and conduct more and more over time. but build your system right and you will not have any leaks and this wont be a problem. People are over cautious about this in my opinion. using 7/16 tubing on 1/2 barbs its not going to leak. just run the barbs down into the block finger tight and then 1/4 to 1/2 more turn with a wrench and they will seal up fine. dont over tighten as you will crush the O-ring. People leak test for 24+ hours. me personally i run it for 1/2 hour wile im bleeding the system and then call it good. If it doesn't leak while im pulling on the tubing and moving the case around it wont leak just sitting there. But leak test for how ever long it takes to make YOU feel comfortable. its YOUR system and money after all