Overclock.net › Forums › Components › Hard Drives & Storage › SSD › Installing windows AHCI woes
New Posts  All Forums:Forum Nav:

Installing windows AHCI woes

post #1 of 18
Thread Starter 
Hey guys, So I'm in the process of reinstalling windows on my ssd. It was my understanding that you should have ahci enabled in bios prior to installation and it was already enabled before I began installing.

Now after windows installed and rebooted to complete installation it passes the IDE screen and finds no drives (since of course AHCI is enabled) then onto the next screen which is the AHCI bios loading it pauses and fails to find any drives and won't progress.

I figured I might try to reenable IDE but after rebooting and hitting del to go into bios it has to pass the AHCI screen first which is where I got stuck.

I'm at a loss and all I can think to do now is clear CMOS to force reset to IDE, this doesn't make sense.

Any help would be greatly appreciated.
    
CPUMotherboardGraphicsGraphics
I7 4790k 4.7ghz Asrock Z97 Extreme4 Gigabyte G1 GTX 970 SLI @ 1590Mhz Gigabyte G1 GTX 970 SLI @ 1590Mhz 
RAMHard DriveHard DriveHard Drive
16gb GSkill Sniper 2200mhz Crucial MX100 256gb Samsung F3 1TB Samsung F3 1TB 
Hard DriveCoolingCoolingCooling
Seagate 3TB EK Supremacy Evo EK Nickel VGA Block x2 w/ Backplates Alphacool UT60 480mm Rad 
CoolingCoolingCoolingOS
Alphacool XT45 480mm Rad Dual D5 Pump w/ Dual Pump Top Gentle Typhoon AP-15s x18 Win 7 64 bit 
MonitorMonitorPowerCase
Qnix QX2710 1440P + 1080P IPS secondary Benq W1070 Projector on 120" Screen Seasonic Platinum 1200w Corsair 900D 
MouseMouse PadAudioAudio
Logitech G9X Mionix Propus 380 ATH AD700 Creative X-Fi Titanium 
Audio
Logitech X-530 
  hide details  
Reply
    
CPUMotherboardGraphicsGraphics
I7 4790k 4.7ghz Asrock Z97 Extreme4 Gigabyte G1 GTX 970 SLI @ 1590Mhz Gigabyte G1 GTX 970 SLI @ 1590Mhz 
RAMHard DriveHard DriveHard Drive
16gb GSkill Sniper 2200mhz Crucial MX100 256gb Samsung F3 1TB Samsung F3 1TB 
Hard DriveCoolingCoolingCooling
Seagate 3TB EK Supremacy Evo EK Nickel VGA Block x2 w/ Backplates Alphacool UT60 480mm Rad 
CoolingCoolingCoolingOS
Alphacool XT45 480mm Rad Dual D5 Pump w/ Dual Pump Top Gentle Typhoon AP-15s x18 Win 7 64 bit 
MonitorMonitorPowerCase
Qnix QX2710 1440P + 1080P IPS secondary Benq W1070 Projector on 120" Screen Seasonic Platinum 1200w Corsair 900D 
MouseMouse PadAudioAudio
Logitech G9X Mionix Propus 380 ATH AD700 Creative X-Fi Titanium 
Audio
Logitech X-530 
  hide details  
Reply
post #2 of 18
You didn't do anything wrong but I think you have to load motherboad and chipset drivers after formating the SSD from the Windows installation menu. Have you mobo chipset drivers ready.

Also, update the motherboard BIOS if it is too old which might not support the SSD.
ケンジ
(16 items)
 
  
CPUCPUMotherboardGraphics
i7-3960X i7-980X GA-X79-UD7 / GA-X58A-UD9 7970 + 465 
GraphicsRAMRAMHard Drive
2x 6990 + 580 16GB 2133 MHz 24GB 2000 MHz 120GB x 2 RAID0 
Hard DriveHard DriveCoolingCooling
120GB x 4 RAID0 Raptor 300GB x 2 RAID0 CPU-370 CPU-370 
CoolingCoolingOSPower
VID-AR699 EK FB X58A-UD9 Win 7 Ultimate x64 1500W / 1250W+1200W 
  hide details  
Reply
ケンジ
(16 items)
 
  
CPUCPUMotherboardGraphics
i7-3960X i7-980X GA-X79-UD7 / GA-X58A-UD9 7970 + 465 
GraphicsRAMRAMHard Drive
2x 6990 + 580 16GB 2133 MHz 24GB 2000 MHz 120GB x 2 RAID0 
Hard DriveHard DriveCoolingCooling
120GB x 4 RAID0 Raptor 300GB x 2 RAID0 CPU-370 CPU-370 
CoolingCoolingOSPower
VID-AR699 EK FB X58A-UD9 Win 7 Ultimate x64 1500W / 1250W+1200W 
  hide details  
Reply
post #3 of 18
Thread Starter 
There's no way for me to install motherboard/chipset drivers (chipset drivers should be up to date, only 1 on gigabyte.com which is dated before i bought the board) since I can't even get into the bios. And the bios is up to date, I updated it after I bought and installed windows on the ssd the first time over half a year ago.

It's as if the ahci drivers were on the ssd I was trying to install windows on, since wiping the drive I can't get passed that ahci screen. It gets to the screen and says ahci, tells the number of ports and the number of drives connected but doesn't list any of them as it used to and won't move on.
    
CPUMotherboardGraphicsGraphics
I7 4790k 4.7ghz Asrock Z97 Extreme4 Gigabyte G1 GTX 970 SLI @ 1590Mhz Gigabyte G1 GTX 970 SLI @ 1590Mhz 
RAMHard DriveHard DriveHard Drive
16gb GSkill Sniper 2200mhz Crucial MX100 256gb Samsung F3 1TB Samsung F3 1TB 
Hard DriveCoolingCoolingCooling
Seagate 3TB EK Supremacy Evo EK Nickel VGA Block x2 w/ Backplates Alphacool UT60 480mm Rad 
CoolingCoolingCoolingOS
Alphacool XT45 480mm Rad Dual D5 Pump w/ Dual Pump Top Gentle Typhoon AP-15s x18 Win 7 64 bit 
MonitorMonitorPowerCase
Qnix QX2710 1440P + 1080P IPS secondary Benq W1070 Projector on 120" Screen Seasonic Platinum 1200w Corsair 900D 
MouseMouse PadAudioAudio
Logitech G9X Mionix Propus 380 ATH AD700 Creative X-Fi Titanium 
Audio
Logitech X-530 
  hide details  
Reply
    
CPUMotherboardGraphicsGraphics
I7 4790k 4.7ghz Asrock Z97 Extreme4 Gigabyte G1 GTX 970 SLI @ 1590Mhz Gigabyte G1 GTX 970 SLI @ 1590Mhz 
RAMHard DriveHard DriveHard Drive
16gb GSkill Sniper 2200mhz Crucial MX100 256gb Samsung F3 1TB Samsung F3 1TB 
Hard DriveCoolingCoolingCooling
Seagate 3TB EK Supremacy Evo EK Nickel VGA Block x2 w/ Backplates Alphacool UT60 480mm Rad 
CoolingCoolingCoolingOS
Alphacool XT45 480mm Rad Dual D5 Pump w/ Dual Pump Top Gentle Typhoon AP-15s x18 Win 7 64 bit 
MonitorMonitorPowerCase
Qnix QX2710 1440P + 1080P IPS secondary Benq W1070 Projector on 120" Screen Seasonic Platinum 1200w Corsair 900D 
MouseMouse PadAudioAudio
Logitech G9X Mionix Propus 380 ATH AD700 Creative X-Fi Titanium 
Audio
Logitech X-530 
  hide details  
Reply
post #4 of 18
Do you mean you can't even try to reinstall Windows and during the process there's an option to load drivers? It looks like you have to load AHCI driver during the installation process. If you don't want to do this, I don't see how you will be able to get pass the AHCI screen.

Edit:

If you can't get into BIOS, just reset CMOS.
ケンジ
(16 items)
 
  
CPUCPUMotherboardGraphics
i7-3960X i7-980X GA-X79-UD7 / GA-X58A-UD9 7970 + 465 
GraphicsRAMRAMHard Drive
2x 6990 + 580 16GB 2133 MHz 24GB 2000 MHz 120GB x 2 RAID0 
Hard DriveHard DriveCoolingCooling
120GB x 4 RAID0 Raptor 300GB x 2 RAID0 CPU-370 CPU-370 
CoolingCoolingOSPower
VID-AR699 EK FB X58A-UD9 Win 7 Ultimate x64 1500W / 1250W+1200W 
  hide details  
Reply
ケンジ
(16 items)
 
  
CPUCPUMotherboardGraphics
i7-3960X i7-980X GA-X79-UD7 / GA-X58A-UD9 7970 + 465 
GraphicsRAMRAMHard Drive
2x 6990 + 580 16GB 2133 MHz 24GB 2000 MHz 120GB x 2 RAID0 
Hard DriveHard DriveCoolingCooling
120GB x 4 RAID0 Raptor 300GB x 2 RAID0 CPU-370 CPU-370 
CoolingCoolingOSPower
VID-AR699 EK FB X58A-UD9 Win 7 Ultimate x64 1500W / 1250W+1200W 
  hide details  
Reply
post #5 of 18
Thread Starter 
That's what I was thinking I had to do because in order to get into the bios (I hit del and it said loading) it must pass the AHCI screen first.

But I've been tinkering around and trying different things. I had the SSD in sata port 0 and HDD in port 1, disconnecting HDD did nothing. Then I moved HDD to port 0 and disconnected the SSD and it loaded the AHCI bios, listed drives and I got into the bios.

What does this mean? I must be missing something simple, I haven't installed any new chipset drivers or firmware updates since I installed windows on the SSD the first time. Everything should still be compatible driver wise.
    
CPUMotherboardGraphicsGraphics
I7 4790k 4.7ghz Asrock Z97 Extreme4 Gigabyte G1 GTX 970 SLI @ 1590Mhz Gigabyte G1 GTX 970 SLI @ 1590Mhz 
RAMHard DriveHard DriveHard Drive
16gb GSkill Sniper 2200mhz Crucial MX100 256gb Samsung F3 1TB Samsung F3 1TB 
Hard DriveCoolingCoolingCooling
Seagate 3TB EK Supremacy Evo EK Nickel VGA Block x2 w/ Backplates Alphacool UT60 480mm Rad 
CoolingCoolingCoolingOS
Alphacool XT45 480mm Rad Dual D5 Pump w/ Dual Pump Top Gentle Typhoon AP-15s x18 Win 7 64 bit 
MonitorMonitorPowerCase
Qnix QX2710 1440P + 1080P IPS secondary Benq W1070 Projector on 120" Screen Seasonic Platinum 1200w Corsair 900D 
MouseMouse PadAudioAudio
Logitech G9X Mionix Propus 380 ATH AD700 Creative X-Fi Titanium 
Audio
Logitech X-530 
  hide details  
Reply
    
CPUMotherboardGraphicsGraphics
I7 4790k 4.7ghz Asrock Z97 Extreme4 Gigabyte G1 GTX 970 SLI @ 1590Mhz Gigabyte G1 GTX 970 SLI @ 1590Mhz 
RAMHard DriveHard DriveHard Drive
16gb GSkill Sniper 2200mhz Crucial MX100 256gb Samsung F3 1TB Samsung F3 1TB 
Hard DriveCoolingCoolingCooling
Seagate 3TB EK Supremacy Evo EK Nickel VGA Block x2 w/ Backplates Alphacool UT60 480mm Rad 
CoolingCoolingCoolingOS
Alphacool XT45 480mm Rad Dual D5 Pump w/ Dual Pump Top Gentle Typhoon AP-15s x18 Win 7 64 bit 
MonitorMonitorPowerCase
Qnix QX2710 1440P + 1080P IPS secondary Benq W1070 Projector on 120" Screen Seasonic Platinum 1200w Corsair 900D 
MouseMouse PadAudioAudio
Logitech G9X Mionix Propus 380 ATH AD700 Creative X-Fi Titanium 
Audio
Logitech X-530 
  hide details  
Reply
post #6 of 18
Set AHCI in BIOS > Install Windows > format SSD > Load drivers > complete Windows Installation > Install Motherboard and Chipset Drivers. Done.
ケンジ
(16 items)
 
  
CPUCPUMotherboardGraphics
i7-3960X i7-980X GA-X79-UD7 / GA-X58A-UD9 7970 + 465 
GraphicsRAMRAMHard Drive
2x 6990 + 580 16GB 2133 MHz 24GB 2000 MHz 120GB x 2 RAID0 
Hard DriveHard DriveCoolingCooling
120GB x 4 RAID0 Raptor 300GB x 2 RAID0 CPU-370 CPU-370 
CoolingCoolingOSPower
VID-AR699 EK FB X58A-UD9 Win 7 Ultimate x64 1500W / 1250W+1200W 
  hide details  
Reply
ケンジ
(16 items)
 
  
CPUCPUMotherboardGraphics
i7-3960X i7-980X GA-X79-UD7 / GA-X58A-UD9 7970 + 465 
GraphicsRAMRAMHard Drive
2x 6990 + 580 16GB 2133 MHz 24GB 2000 MHz 120GB x 2 RAID0 
Hard DriveHard DriveCoolingCooling
120GB x 4 RAID0 Raptor 300GB x 2 RAID0 CPU-370 CPU-370 
CoolingCoolingOSPower
VID-AR699 EK FB X58A-UD9 Win 7 Ultimate x64 1500W / 1250W+1200W 
  hide details  
Reply
post #7 of 18
Thread Starter 
Ok sorry but what drivers are you referring to? The only SSD drivers I installed last time were the Intel RST drivers but that was inside windows. Same for motherboard drivers (audio drivers, lan drivers etc). Never did that outside of windows.
    
CPUMotherboardGraphicsGraphics
I7 4790k 4.7ghz Asrock Z97 Extreme4 Gigabyte G1 GTX 970 SLI @ 1590Mhz Gigabyte G1 GTX 970 SLI @ 1590Mhz 
RAMHard DriveHard DriveHard Drive
16gb GSkill Sniper 2200mhz Crucial MX100 256gb Samsung F3 1TB Samsung F3 1TB 
Hard DriveCoolingCoolingCooling
Seagate 3TB EK Supremacy Evo EK Nickel VGA Block x2 w/ Backplates Alphacool UT60 480mm Rad 
CoolingCoolingCoolingOS
Alphacool XT45 480mm Rad Dual D5 Pump w/ Dual Pump Top Gentle Typhoon AP-15s x18 Win 7 64 bit 
MonitorMonitorPowerCase
Qnix QX2710 1440P + 1080P IPS secondary Benq W1070 Projector on 120" Screen Seasonic Platinum 1200w Corsair 900D 
MouseMouse PadAudioAudio
Logitech G9X Mionix Propus 380 ATH AD700 Creative X-Fi Titanium 
Audio
Logitech X-530 
  hide details  
Reply
    
CPUMotherboardGraphicsGraphics
I7 4790k 4.7ghz Asrock Z97 Extreme4 Gigabyte G1 GTX 970 SLI @ 1590Mhz Gigabyte G1 GTX 970 SLI @ 1590Mhz 
RAMHard DriveHard DriveHard Drive
16gb GSkill Sniper 2200mhz Crucial MX100 256gb Samsung F3 1TB Samsung F3 1TB 
Hard DriveCoolingCoolingCooling
Seagate 3TB EK Supremacy Evo EK Nickel VGA Block x2 w/ Backplates Alphacool UT60 480mm Rad 
CoolingCoolingCoolingOS
Alphacool XT45 480mm Rad Dual D5 Pump w/ Dual Pump Top Gentle Typhoon AP-15s x18 Win 7 64 bit 
MonitorMonitorPowerCase
Qnix QX2710 1440P + 1080P IPS secondary Benq W1070 Projector on 120" Screen Seasonic Platinum 1200w Corsair 900D 
MouseMouse PadAudioAudio
Logitech G9X Mionix Propus 380 ATH AD700 Creative X-Fi Titanium 
Audio
Logitech X-530 
  hide details  
Reply
post #8 of 18
Usually you don't need to install motherboard and chipset drivers (AHCI) during the Windows installation. But in your case where AHCI is not working, this is the only way I could think of for you to try. If you want to do otherwise, let's hope for others with better solutions for you.
ケンジ
(16 items)
 
  
CPUCPUMotherboardGraphics
i7-3960X i7-980X GA-X79-UD7 / GA-X58A-UD9 7970 + 465 
GraphicsRAMRAMHard Drive
2x 6990 + 580 16GB 2133 MHz 24GB 2000 MHz 120GB x 2 RAID0 
Hard DriveHard DriveCoolingCooling
120GB x 4 RAID0 Raptor 300GB x 2 RAID0 CPU-370 CPU-370 
CoolingCoolingOSPower
VID-AR699 EK FB X58A-UD9 Win 7 Ultimate x64 1500W / 1250W+1200W 
  hide details  
Reply
ケンジ
(16 items)
 
  
CPUCPUMotherboardGraphics
i7-3960X i7-980X GA-X79-UD7 / GA-X58A-UD9 7970 + 465 
GraphicsRAMRAMHard Drive
2x 6990 + 580 16GB 2133 MHz 24GB 2000 MHz 120GB x 2 RAID0 
Hard DriveHard DriveCoolingCooling
120GB x 4 RAID0 Raptor 300GB x 2 RAID0 CPU-370 CPU-370 
CoolingCoolingOSPower
VID-AR699 EK FB X58A-UD9 Win 7 Ultimate x64 1500W / 1250W+1200W 
  hide details  
Reply
post #9 of 18
Thread Starter 
It's not that I want to do otherwise I just didn't realize motherboard drivers and ssd drivers (aside from intel RST I don't know what drivers those would be) could be installed outside of the operating system. Really appreciate the help.

So I tried plugging the SSD back in, this time in port 1 (second port) and got to the ahci screen, showed the HDD in port0 and for port 1 (the ssd) it said not detected and wouldnt continue. I then disconnected the SSD, went into the bios and enabled IDE and plugged the ssd back into port1 and it booted.

Whatever I need to do to the ssd so I can boot it in AHCI I'm going to need to do it in while in IDE.
    
CPUMotherboardGraphicsGraphics
I7 4790k 4.7ghz Asrock Z97 Extreme4 Gigabyte G1 GTX 970 SLI @ 1590Mhz Gigabyte G1 GTX 970 SLI @ 1590Mhz 
RAMHard DriveHard DriveHard Drive
16gb GSkill Sniper 2200mhz Crucial MX100 256gb Samsung F3 1TB Samsung F3 1TB 
Hard DriveCoolingCoolingCooling
Seagate 3TB EK Supremacy Evo EK Nickel VGA Block x2 w/ Backplates Alphacool UT60 480mm Rad 
CoolingCoolingCoolingOS
Alphacool XT45 480mm Rad Dual D5 Pump w/ Dual Pump Top Gentle Typhoon AP-15s x18 Win 7 64 bit 
MonitorMonitorPowerCase
Qnix QX2710 1440P + 1080P IPS secondary Benq W1070 Projector on 120" Screen Seasonic Platinum 1200w Corsair 900D 
MouseMouse PadAudioAudio
Logitech G9X Mionix Propus 380 ATH AD700 Creative X-Fi Titanium 
Audio
Logitech X-530 
  hide details  
Reply
    
CPUMotherboardGraphicsGraphics
I7 4790k 4.7ghz Asrock Z97 Extreme4 Gigabyte G1 GTX 970 SLI @ 1590Mhz Gigabyte G1 GTX 970 SLI @ 1590Mhz 
RAMHard DriveHard DriveHard Drive
16gb GSkill Sniper 2200mhz Crucial MX100 256gb Samsung F3 1TB Samsung F3 1TB 
Hard DriveCoolingCoolingCooling
Seagate 3TB EK Supremacy Evo EK Nickel VGA Block x2 w/ Backplates Alphacool UT60 480mm Rad 
CoolingCoolingCoolingOS
Alphacool XT45 480mm Rad Dual D5 Pump w/ Dual Pump Top Gentle Typhoon AP-15s x18 Win 7 64 bit 
MonitorMonitorPowerCase
Qnix QX2710 1440P + 1080P IPS secondary Benq W1070 Projector on 120" Screen Seasonic Platinum 1200w Corsair 900D 
MouseMouse PadAudioAudio
Logitech G9X Mionix Propus 380 ATH AD700 Creative X-Fi Titanium 
Audio
Logitech X-530 
  hide details  
Reply
post #10 of 18
This is the easiest way.

Set AHCI in BIOS > Install Windows > format SSD > Load drivers > complete Windows Installation > Install Motherboard and Chipset Drivers. Done.

There is a registry edit for AHCI but the above is the easiest.

Quote:
Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully. For added protection, back up the registry before you modify it. Then, you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article number to view the article in the Microsoft Knowledge Base:
322756 How to back up and restore the registry in Windows

To resolve this issue yourself, enable the AHCI driver in the registry before you change the SATA mode of the boot drive.

To do this, follow these steps:

1.Exit all Windows-based programs.
2.Click Start, type regedit in the Start Search box, and then press ENTER.
3.If you receive the User Account Control dialog box, click Continue.
4.Locate and then click one of the following registry subkeys:

HKEY_LOCAL_MACHINE\\System\\CurrentControlSet\\Ser vices\\Msahci
HKEY_LOCAL_MACHINE\\System\\CurrentControlSet\\Ser vices\\IastorV

5.In the right pane, right-click Start in the Name column, and then click Modify.
6.In the Value data box, type 0, and then click OK.
7.On the File menu, click Exit to close Registry Editor.
http://support.microsoft.com/kb/922976
Edited by Ken1649 - 10/7/11 at 5:57pm
ケンジ
(16 items)
 
  
CPUCPUMotherboardGraphics
i7-3960X i7-980X GA-X79-UD7 / GA-X58A-UD9 7970 + 465 
GraphicsRAMRAMHard Drive
2x 6990 + 580 16GB 2133 MHz 24GB 2000 MHz 120GB x 2 RAID0 
Hard DriveHard DriveCoolingCooling
120GB x 4 RAID0 Raptor 300GB x 2 RAID0 CPU-370 CPU-370 
CoolingCoolingOSPower
VID-AR699 EK FB X58A-UD9 Win 7 Ultimate x64 1500W / 1250W+1200W 
  hide details  
Reply
ケンジ
(16 items)
 
  
CPUCPUMotherboardGraphics
i7-3960X i7-980X GA-X79-UD7 / GA-X58A-UD9 7970 + 465 
GraphicsRAMRAMHard Drive
2x 6990 + 580 16GB 2133 MHz 24GB 2000 MHz 120GB x 2 RAID0 
Hard DriveHard DriveCoolingCooling
120GB x 4 RAID0 Raptor 300GB x 2 RAID0 CPU-370 CPU-370 
CoolingCoolingOSPower
VID-AR699 EK FB X58A-UD9 Win 7 Ultimate x64 1500W / 1250W+1200W 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: SSD
Overclock.net › Forums › Components › Hard Drives & Storage › SSD › Installing windows AHCI woes