Overclock.net › Forums › Case Mods & Cases › Builds & Case Mods › Case Mods › Reccomend me a Hole Saw Bit and Jigsaw blade
New Posts  All Forums:Forum Nav:

Reccomend me a Hole Saw Bit and Jigsaw blade

post #1 of 9
Thread Starter 
Hey guys.

So planning on doing some case mods to my cosmos s case. Gonna make some cable management holes with rounded edges just like the existing holes in the case. I have a jigsaw to do the straight lines and a drill which I can use to bore the holes.

After reading, I learnt that i will need a bimetal hole saw bit, but I have no idea which one to get. I have to buy them from amazon, the hardware stores here will only waste my time. I also need a suitable jigsaw blade for cutting metal. My tools are all corded Black and Deckers.

1. I need at least 1" hole saw bit - preferably in a kit or if i can get a step bit with a 1" option

2. A short jigsaw blade suitable for metal.

Amazon.com
Subdued
(15 items)
 
  
CPUMotherboardGraphicsRAM
2500k @ 3.3Ghz ASUS P8Z68-V PRO XFX 9800GTX+ Corsair Vengeance CMZ8GX3M2A1600C9 
Hard DriveOptical DriveCoolingOS
WD Caviar Black  Samsung Writemaster Intel Stock  Windows 7 x64 
MonitorKeyboardPowerCase
Acer X223W Logitech Classic 200 Corsair 750TX Cooler Master Cosmos S 
MouseMouse PadAudio
Microsoft Intellimouse Optical None Creative X-Fi Xtreme Audio PCI-E 
  hide details  
Reply
Subdued
(15 items)
 
  
CPUMotherboardGraphicsRAM
2500k @ 3.3Ghz ASUS P8Z68-V PRO XFX 9800GTX+ Corsair Vengeance CMZ8GX3M2A1600C9 
Hard DriveOptical DriveCoolingOS
WD Caviar Black  Samsung Writemaster Intel Stock  Windows 7 x64 
MonitorKeyboardPowerCase
Acer X223W Logitech Classic 200 Corsair 750TX Cooler Master Cosmos S 
MouseMouse PadAudio
Microsoft Intellimouse Optical None Creative X-Fi Xtreme Audio PCI-E 
  hide details  
Reply
post #2 of 9

dewalt is good. its on prime too


here is the listing as well. Bosch is good stuff but can be expensive. Yet would less likely tear up light weight aluminum.



here's a review of the Bosch

"These blades make cutting metal as easy a cutting butter. I mod computers and making tight turns on computer panels is very easy! They also last a long time. I cut mostly aluminum so heavier metals will probably make them wear differently. Highly recommend! "
Edited by hednik - 10/8/11 at 6:42pm
The Move
(13 items)
 
Son's Rig
(14 items)
 
 
CPUMotherboardGraphicsRAM
i5 750  Gigabyte P55 UD4P rev 1.0 HIS 6850 / SLI GTX 460 Corsair Vengeance DDR3 (2x4gb) 1600mhz  
Hard DriveOptical DriveCoolingOS
250 GB WD x2 Raid 0 ASUS DVD/R Corsair H50 Windows 7 Ultimate x64 
MonitorKeyboardPowerCase
LG 22' LCD Logitech MK260 CM Silent Pro M600w Lian Li PC 60Plus II 
Mouse
Logitech  
CPUMotherboardGraphicsRAM
Athlon 7750 BE @ 3.2 Asus M3N72-D 9600 GSO G94 512 2x2 PNY XLR8 DDR2 
Hard DriveOptical DriveCoolingOS
WD 200 SATA2 Pioneer Lightscribe Thermaltake R1 Windows 7 Ultimate 
MonitorKeyboardPowerCase
LG 22' Logitech Antec 500W Antec 300 Illusion 
Mouse
Logitech 
  hide details  
Reply
The Move
(13 items)
 
Son's Rig
(14 items)
 
 
CPUMotherboardGraphicsRAM
i5 750  Gigabyte P55 UD4P rev 1.0 HIS 6850 / SLI GTX 460 Corsair Vengeance DDR3 (2x4gb) 1600mhz  
Hard DriveOptical DriveCoolingOS
250 GB WD x2 Raid 0 ASUS DVD/R Corsair H50 Windows 7 Ultimate x64 
MonitorKeyboardPowerCase
LG 22' LCD Logitech MK260 CM Silent Pro M600w Lian Li PC 60Plus II 
Mouse
Logitech  
CPUMotherboardGraphicsRAM
Athlon 7750 BE @ 3.2 Asus M3N72-D 9600 GSO G94 512 2x2 PNY XLR8 DDR2 
Hard DriveOptical DriveCoolingOS
WD 200 SATA2 Pioneer Lightscribe Thermaltake R1 Windows 7 Ultimate 
MonitorKeyboardPowerCase
LG 22' Logitech Antec 500W Antec 300 Illusion 
Mouse
Logitech 
  hide details  
Reply
post #3 of 9
Thread Starter 
the second link is down
Subdued
(15 items)
 
  
CPUMotherboardGraphicsRAM
2500k @ 3.3Ghz ASUS P8Z68-V PRO XFX 9800GTX+ Corsair Vengeance CMZ8GX3M2A1600C9 
Hard DriveOptical DriveCoolingOS
WD Caviar Black  Samsung Writemaster Intel Stock  Windows 7 x64 
MonitorKeyboardPowerCase
Acer X223W Logitech Classic 200 Corsair 750TX Cooler Master Cosmos S 
MouseMouse PadAudio
Microsoft Intellimouse Optical None Creative X-Fi Xtreme Audio PCI-E 
  hide details  
Reply
Subdued
(15 items)
 
  
CPUMotherboardGraphicsRAM
2500k @ 3.3Ghz ASUS P8Z68-V PRO XFX 9800GTX+ Corsair Vengeance CMZ8GX3M2A1600C9 
Hard DriveOptical DriveCoolingOS
WD Caviar Black  Samsung Writemaster Intel Stock  Windows 7 x64 
MonitorKeyboardPowerCase
Acer X223W Logitech Classic 200 Corsair 750TX Cooler Master Cosmos S 
MouseMouse PadAudio
Microsoft Intellimouse Optical None Creative X-Fi Xtreme Audio PCI-E 
  hide details  
Reply
post #4 of 9
The Move
(13 items)
 
Son's Rig
(14 items)
 
 
CPUMotherboardGraphicsRAM
i5 750  Gigabyte P55 UD4P rev 1.0 HIS 6850 / SLI GTX 460 Corsair Vengeance DDR3 (2x4gb) 1600mhz  
Hard DriveOptical DriveCoolingOS
250 GB WD x2 Raid 0 ASUS DVD/R Corsair H50 Windows 7 Ultimate x64 
MonitorKeyboardPowerCase
LG 22' LCD Logitech MK260 CM Silent Pro M600w Lian Li PC 60Plus II 
Mouse
Logitech  
CPUMotherboardGraphicsRAM
Athlon 7750 BE @ 3.2 Asus M3N72-D 9600 GSO G94 512 2x2 PNY XLR8 DDR2 
Hard DriveOptical DriveCoolingOS
WD 200 SATA2 Pioneer Lightscribe Thermaltake R1 Windows 7 Ultimate 
MonitorKeyboardPowerCase
LG 22' Logitech Antec 500W Antec 300 Illusion 
Mouse
Logitech 
  hide details  
Reply
The Move
(13 items)
 
Son's Rig
(14 items)
 
 
CPUMotherboardGraphicsRAM
i5 750  Gigabyte P55 UD4P rev 1.0 HIS 6850 / SLI GTX 460 Corsair Vengeance DDR3 (2x4gb) 1600mhz  
Hard DriveOptical DriveCoolingOS
250 GB WD x2 Raid 0 ASUS DVD/R Corsair H50 Windows 7 Ultimate x64 
MonitorKeyboardPowerCase
LG 22' LCD Logitech MK260 CM Silent Pro M600w Lian Li PC 60Plus II 
Mouse
Logitech  
CPUMotherboardGraphicsRAM
Athlon 7750 BE @ 3.2 Asus M3N72-D 9600 GSO G94 512 2x2 PNY XLR8 DDR2 
Hard DriveOptical DriveCoolingOS
WD 200 SATA2 Pioneer Lightscribe Thermaltake R1 Windows 7 Ultimate 
MonitorKeyboardPowerCase
LG 22' Logitech Antec 500W Antec 300 Illusion 
Mouse
Logitech 
  hide details  
Reply
post #5 of 9
Any luck?

Sent from my SAMSUNG-SGH-I897 using Tapatalk
The Move
(13 items)
 
Son's Rig
(14 items)
 
 
CPUMotherboardGraphicsRAM
i5 750  Gigabyte P55 UD4P rev 1.0 HIS 6850 / SLI GTX 460 Corsair Vengeance DDR3 (2x4gb) 1600mhz  
Hard DriveOptical DriveCoolingOS
250 GB WD x2 Raid 0 ASUS DVD/R Corsair H50 Windows 7 Ultimate x64 
MonitorKeyboardPowerCase
LG 22' LCD Logitech MK260 CM Silent Pro M600w Lian Li PC 60Plus II 
Mouse
Logitech  
CPUMotherboardGraphicsRAM
Athlon 7750 BE @ 3.2 Asus M3N72-D 9600 GSO G94 512 2x2 PNY XLR8 DDR2 
Hard DriveOptical DriveCoolingOS
WD 200 SATA2 Pioneer Lightscribe Thermaltake R1 Windows 7 Ultimate 
MonitorKeyboardPowerCase
LG 22' Logitech Antec 500W Antec 300 Illusion 
Mouse
Logitech 
  hide details  
Reply
The Move
(13 items)
 
Son's Rig
(14 items)
 
 
CPUMotherboardGraphicsRAM
i5 750  Gigabyte P55 UD4P rev 1.0 HIS 6850 / SLI GTX 460 Corsair Vengeance DDR3 (2x4gb) 1600mhz  
Hard DriveOptical DriveCoolingOS
250 GB WD x2 Raid 0 ASUS DVD/R Corsair H50 Windows 7 Ultimate x64 
MonitorKeyboardPowerCase
LG 22' LCD Logitech MK260 CM Silent Pro M600w Lian Li PC 60Plus II 
Mouse
Logitech  
CPUMotherboardGraphicsRAM
Athlon 7750 BE @ 3.2 Asus M3N72-D 9600 GSO G94 512 2x2 PNY XLR8 DDR2 
Hard DriveOptical DriveCoolingOS
WD 200 SATA2 Pioneer Lightscribe Thermaltake R1 Windows 7 Ultimate 
MonitorKeyboardPowerCase
LG 22' Logitech Antec 500W Antec 300 Illusion 
Mouse
Logitech 
  hide details  
Reply
post #6 of 9
If you only need small holes, I might consider a step drill bit (sometimes called a unibit).
post #7 of 9
to stop aluminium tearing or shredding clamp two pieces of wood either side of the hole you want to cut and go straight through the wood and metal. I usually use 14 inch OSB or MDF
post #8 of 9
Quote:
Originally Posted by Slim Shady View Post
to stop aluminium tearing or shredding clamp two pieces of wood either side of the hole you want to cut and go straight through the wood and metal. I usually use 1/4 inch OSB or MDF
Let me help you, I think..
post #9 of 9
Thread Starter 
well i didn't have to order any after all. My cousin lent me a set he had. It consists of a mandrel with a circular base with grooves so you can fit in the holesaw bits.

the bits aren't complete 'cylinders.' there is a gap inn them that allows you to rotate it around the bit and lock in place. I'll try to get some pics of it up soon, but you most likely will see it in the build log i'm gonna do
Subdued
(15 items)
 
  
CPUMotherboardGraphicsRAM
2500k @ 3.3Ghz ASUS P8Z68-V PRO XFX 9800GTX+ Corsair Vengeance CMZ8GX3M2A1600C9 
Hard DriveOptical DriveCoolingOS
WD Caviar Black  Samsung Writemaster Intel Stock  Windows 7 x64 
MonitorKeyboardPowerCase
Acer X223W Logitech Classic 200 Corsair 750TX Cooler Master Cosmos S 
MouseMouse PadAudio
Microsoft Intellimouse Optical None Creative X-Fi Xtreme Audio PCI-E 
  hide details  
Reply
Subdued
(15 items)
 
  
CPUMotherboardGraphicsRAM
2500k @ 3.3Ghz ASUS P8Z68-V PRO XFX 9800GTX+ Corsair Vengeance CMZ8GX3M2A1600C9 
Hard DriveOptical DriveCoolingOS
WD Caviar Black  Samsung Writemaster Intel Stock  Windows 7 x64 
MonitorKeyboardPowerCase
Acer X223W Logitech Classic 200 Corsair 750TX Cooler Master Cosmos S 
MouseMouse PadAudio
Microsoft Intellimouse Optical None Creative X-Fi Xtreme Audio PCI-E 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Case Mods
Overclock.net › Forums › Case Mods & Cases › Builds & Case Mods › Case Mods › Reccomend me a Hole Saw Bit and Jigsaw blade