Overclock.net › Forums › Case Mods & Cases › Builds & Case Mods › Case Mods › Need Sketchup Help...
New Posts  All Forums:Forum Nav:

Need Sketchup Help...

post #1 of 3
Thread Starter 
After installing and spending the last 20 minutes trying to figure out sketchup, I figured I'd make a thread. I am wanting something extremely simple and rough.

I need a sketchup of a black box with dimensions 15"W x 8"H x 20"D and any ATX mobo on the top (horizonal) with the I/O along the 15" side. If its not to much trouble please put one of these mounted horizontally and next to the mobo.

Thanks!
Edited by Seufari - 10/10/11 at 3:37pm
post #2 of 3
The box is easy enough to do.
1. Just use the rectangle tool and draw a 15" by 20" rectangle.
2. Use the pull tool to pull it up 8".
3. Use the offset tool on an 20" by 8" side and choose a thickness for the material. 2mm-4mm is common for cases.
4. Use the push tool on the rectangle you just created in 3 and push it in 15" minus w/e thickness you choose. Ie, if you choose 4mm material thickness, push it 14.84" (15" - 0.157" (4mm converted to inches").
5. Mobo wise, they're actually very time consuming to make, but you can grab one off here
http://scc.jezmckean.com/home
You can also insert the t-virus yourself wherever you want using the move tool.


All this is very basic and shouldn't take more than 5 minutes. You can go through the basic tutorial video's as well if you wanna learn more
http://sketchup.google.com/training/...ew_to_gsu.html
Alduin-WIP
(22 items)
 
  
CPUMotherboardGraphicsGraphics
i7-2600k GA Z68XP-UD4 MSI 6950 2gb Twin Frozr III MSI 6950 2gb Twin Frozr III 
RAMHard DriveHard DriveHard Drive
G Skill Sniper Crucial M4 256GB Spinpoint F4 2TB Spinpoint F4 2TB 
Hard DriveCoolingOSMonitor
Spinpoint F4 2TB Thermalright HR-02 Windows 7 Professional 64 bit Dell U2311H x3 Portrait Eyefinity 
PowerCaseOtherOther
Corsair AX750 Silverstone FT02 Sleeving, acrylic, lighting and whole buncha ot... Laser Cutting and Engraving 
  hide details  
Reply
Alduin-WIP
(22 items)
 
  
CPUMotherboardGraphicsGraphics
i7-2600k GA Z68XP-UD4 MSI 6950 2gb Twin Frozr III MSI 6950 2gb Twin Frozr III 
RAMHard DriveHard DriveHard Drive
G Skill Sniper Crucial M4 256GB Spinpoint F4 2TB Spinpoint F4 2TB 
Hard DriveCoolingOSMonitor
Spinpoint F4 2TB Thermalright HR-02 Windows 7 Professional 64 bit Dell U2311H x3 Portrait Eyefinity 
PowerCaseOtherOther
Corsair AX750 Silverstone FT02 Sleeving, acrylic, lighting and whole buncha ot... Laser Cutting and Engraving 
  hide details  
Reply
post #3 of 3
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Case Mods
Overclock.net › Forums › Case Mods & Cases › Builds & Case Mods › Case Mods › Need Sketchup Help...