Overclock.net › Forums › Intel › Intel CPUs › i5 2500k and Gigabyte-P67A-D3-B3
New Posts  All Forums:Forum Nav:

i5 2500k and Gigabyte-P67A-D3-B3

post #1 of 2
Thread Starter 
Allright the problem focuses on those two parts on the title. I was up for some overcloking which i have done some days ago. My settings on bios (f3 version) were:
multiplier 40x (4.0ghz)
Ram speed stable on 13.33 (which is my defualt i just wanted to stable them).
Intel turbo boost disabled.
EVERYTHING else are on auto or default state.
I have done prime95 for 10 hours nothing found...

I have been using this overclocking for 7 days or so untill one day... i start the PC im waiting for the post and before the post the pc auto restarts and changes only the multiplier to default value... Then after my manual restart i enter bios and upon the advance configuration it writes on a red marked square that this came from high temperatures or wrong volts... My temps are 28c on cores on idle and 60c on full load...

Do i have to do something further than the previous settings or is something wrong with my machine?

The parts are:
CPU: Intel Core i5-2500K Sandy Bridge 3.3 GHz Overclocked @ 4.0 GHz
Case: Cooler Master Elite 430 Black
CPU Cooling: Cooler Master Hyper TX3
Motherboard: Gigabyte P67A D3 B3 (s1155, P67, DDR3)
RAM: G.Skill Ripjaws X 8GB DDR3 1333MHz (2x4GB kit)
Graphics Card: MSI GTX 460 OC Edition GDDR5, 1GB 725/1450/3800
Hard Drive: SSD Crucial M4 64GB SATA III 6 Gb/s Read speed 500MB/s
Hard Drive 2: Western Digital Caviar Blue 500GB SATA III 6 Gb/s
Power Supply: Cooler Master GX Series 650W PSU Bronze 80+
Edited by dos659 - 10/11/11 at 2:36pm
post #2 of 2
Thread Starter 
anyone?
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › i5 2500k and Gigabyte-P67A-D3-B3