Overclock.net › Forums › AMD › AMD CPUs › AMD FX (Bulldozer) Owners Club!
New Posts  All Forums:Forum Nav:

AMD FX (Bulldozer) Owners Club! - Page 355

post #3541 of 8112
and: the p2 must to be the same as ratio setted in bios. its not allowed to set it on auto.
for voltage there are 2 options: vcore manually setted with llc enabled, [ in PhenomMsrTweaker set the same v.core at p2 state] or vcore on auto with llc enabled [in PMT u must to
play with the p2 voltage until u can achieve a stable overclocking. p3 is in the middle and p4 is the smallest p-state [ i' ve got 5 ratio with 0.750 v-core:)]. for c&q u set the program 'balanced'.
Edited by sorance2000 - 2/9/12 at 12:51am
post #3542 of 8112
Quote:
Originally Posted by sorance2000 View Post

lets talk about your cpu settings advertisement on the site. there are two things: how much volts take a cpu to be stable
on stress and what is your cpu vid [the base cpu vid and your setted cpu v.core.

That is my load voltage on prime95.

I was just using the comparison to show that there is probably something not optimized in his settings. He has a good mobo, that has a pretty decent bios so IMHO he should be able to either go faster or with a lower voltage. BD is fun to OC because there's so many little things to tinker with, but it can also make it hard to pinpoint whats holding it back/causing issues.
Quote:
Originally Posted by Ev1l_HAF View Post

ok so i have this FX6100 , i got it overclocked to 4.3 at 1.42 volts is temps of 36c to 38c idle, this ok for this chip? under load it goes to 52-55c and under prime 95 it went to 73c. i just dont want to burn out this chip thanks for the replies

I just noticed your air cooler & case in your sig rig. I thought you were on stock cooling. 73 seems a little high too for that voltage, especially with your case/cooler. Maybe try applying tim and reseating it?
 
Napkin Folder
(8 items)
 
 
CPUMotherboardGraphicsRAM
FX-6100 4.72Ghz @ 1.428V 990FX Sabertooth 2 X 6950 Unlocked Crossfired OC'd 925/1375 Ripjaws X (4x4GB) 16GB @ 1739 MHz 
Hard DriveHard DrivePowerCase
Crutial M4 64GB 2 x 1TB HDDs Rocketfish 900watt Lian Li PC-K57W 
AudioAudio
Creative Titanium HD Ultrasone Pro 550 
CPUMotherboardGraphicsRAM
AMD x2 250 ASUS M3N78-VM EVGA GTS 450 3 GB ddr 400 
Hard DriveOSPowerCase
80GB Seagate XP cheapo 460watt Antec 200 
  hide details  
Reply
 
Napkin Folder
(8 items)
 
 
CPUMotherboardGraphicsRAM
FX-6100 4.72Ghz @ 1.428V 990FX Sabertooth 2 X 6950 Unlocked Crossfired OC'd 925/1375 Ripjaws X (4x4GB) 16GB @ 1739 MHz 
Hard DriveHard DrivePowerCase
Crutial M4 64GB 2 x 1TB HDDs Rocketfish 900watt Lian Li PC-K57W 
AudioAudio
Creative Titanium HD Ultrasone Pro 550 
CPUMotherboardGraphicsRAM
AMD x2 250 ASUS M3N78-VM EVGA GTS 450 3 GB ddr 400 
Hard DriveOSPowerCase
80GB Seagate XP cheapo 460watt Antec 200 
  hide details  
Reply
post #3543 of 8112
I also run about 1.4375 V for 4.4 GHz stable, I have LLC set to 50% on my board which gives 0 vdroop. So my CPU is at 1.4375 regardless of load. I still manage to idle down to 25 CPU temp and Load of about 52. 1.48 V gets me stable at about 4.6 GHz with the odd SUMOUT error.
CHILZ - Lan Rig
(17 items)
 
CANARY - Main Rig
(16 items)
 
CADILLAC - HTPC
(14 items)
 
CPUMotherboardGraphicsRAM
Intel i5-4570s Asus H97M-Plus AMD R9 280 G.Skill RipjawsX 16 GB (2x8) 
Hard DriveHard DriveHard DriveCooling
250 GB Samsung 840 240 GB Kingston 3 TB USB 3.0 Drive Custom Loop 
OSMonitorKeyboardPower
Windows 10 Preview BenQ GL2450 Filco MajesTouch2 Ninja PC P&C Silencer Mk III 600 W 
CaseMouseMouse PadAudio
Fractal Design Core 1000 Mionix Castor Monoprice XXL JL Amps + Custom Morel Bookshelf speakers 
Other
Scythe Kama-Panel 3 
CPUMotherboardGraphicsRAM
FX-8150 @ 4.6 GHz Fatal1ty 990FX Pro 9800 GTX+ 512 MB G.Skill Ripjaws X 1866 CL9 
Hard DriveHard DriveCoolingOS
120 GB OCZ Vertex 3 1 TB WD Black 5x 120mm + MCP350 + EK Supreme HF + MicroRes Windows 8 Consumer Preview 
MonitorKeyboardPowerCase
2x Dell U2212HM Logitech G110 Cooler Master 850W Silent Pro Cooler Master 690 II Adv. 
MouseMouse PadAudio
Razer Death Adder 3.5G Staples Gel Cushion Asus Xonar DG + Senn. PC333D 
CPUMotherboardGraphicsRAM
Q6600 Acer X1800 ATI 5670 2 GB Kingston 
Hard DriveOptical DriveOSMonitor
2 TB WD Green Asus BD-R Windows 7 Home Premium Sony 50" LCD 
KeyboardPowerCaseMouse
Acer Media 220 W SFF Acer X1800 Acer Optical 
Mouse PadAudio
The TV cabinet Denon 2808 7.1 AVR + Dahlquist 350W 8" Sub + Kl... 
  hide details  
Reply
CHILZ - Lan Rig
(17 items)
 
CANARY - Main Rig
(16 items)
 
CADILLAC - HTPC
(14 items)
 
CPUMotherboardGraphicsRAM
Intel i5-4570s Asus H97M-Plus AMD R9 280 G.Skill RipjawsX 16 GB (2x8) 
Hard DriveHard DriveHard DriveCooling
250 GB Samsung 840 240 GB Kingston 3 TB USB 3.0 Drive Custom Loop 
OSMonitorKeyboardPower
Windows 10 Preview BenQ GL2450 Filco MajesTouch2 Ninja PC P&C Silencer Mk III 600 W 
CaseMouseMouse PadAudio
Fractal Design Core 1000 Mionix Castor Monoprice XXL JL Amps + Custom Morel Bookshelf speakers 
Other
Scythe Kama-Panel 3 
CPUMotherboardGraphicsRAM
FX-8150 @ 4.6 GHz Fatal1ty 990FX Pro 9800 GTX+ 512 MB G.Skill Ripjaws X 1866 CL9 
Hard DriveHard DriveCoolingOS
120 GB OCZ Vertex 3 1 TB WD Black 5x 120mm + MCP350 + EK Supreme HF + MicroRes Windows 8 Consumer Preview 
MonitorKeyboardPowerCase
2x Dell U2212HM Logitech G110 Cooler Master 850W Silent Pro Cooler Master 690 II Adv. 
MouseMouse PadAudio
Razer Death Adder 3.5G Staples Gel Cushion Asus Xonar DG + Senn. PC333D 
CPUMotherboardGraphicsRAM
Q6600 Acer X1800 ATI 5670 2 GB Kingston 
Hard DriveOptical DriveOSMonitor
2 TB WD Green Asus BD-R Windows 7 Home Premium Sony 50" LCD 
KeyboardPowerCaseMouse
Acer Media 220 W SFF Acer X1800 Acer Optical 
Mouse PadAudio
The TV cabinet Denon 2808 7.1 AVR + Dahlquist 350W 8" Sub + Kl... 
  hide details  
Reply
post #3544 of 8112
Quote:
Originally Posted by sorance2000 View Post

As i said , you have taken the worst scenario, too much voltage for idle. You are happy with with your overclocking up to 4,7 ghz with only 1.48 vcore.
My advice, again: try to set the smaller stable v.core that permittes u to boot, and put llc enabled with the max setting [extreme in your bios or only enabled if u haven 't other options].
In idle or slight load u will achieve smaller voltage. I guess u can boot with almost: 1.325-1.400.vcore.
Good luck.!

that is actually what I have done, which brings us back to one size does not fit all with BD, its going to be dependant on your cpu as to what you will need to be stable at what oc.

450
Ra\/eN HeX
(17 items)
 
   
CPUMotherboardGraphicsRAM
FX-6100 ASUS Sabertooth 990FX EVGA GTX460 Corsair Vengance 
Hard DriveHard DriveOptical DriveCooling
Samsung 830 Seagate Baracuda ASUS dvd-rwdl Enzotech saphire rev-a 
CoolingOSMonitorMonitor
XSPC Rasa universal gpu Windows 7 Ultimate 64 Samsung SyncMaster B2030 Samsung SyncMaster 923nw  
KeyboardPowerCaseMouse
Saitek Eclipse II Thermaltake tr-2 500w Silverstone Raven RV03 Razer DeathAdder 
Mouse Pad
Razer Exactmat 
CPUMotherboardGraphicsHard Drive
Athlon II X2 MSI 870-G45 HD4550 Western Digital 
Optical DriveCoolingOSCase
ASUS DVD-rw Thermalright Ultra 120 Windows 7 Ultimate 64 Cooler Master HAF-912 
  hide details  
Reply
Ra\/eN HeX
(17 items)
 
   
CPUMotherboardGraphicsRAM
FX-6100 ASUS Sabertooth 990FX EVGA GTX460 Corsair Vengance 
Hard DriveHard DriveOptical DriveCooling
Samsung 830 Seagate Baracuda ASUS dvd-rwdl Enzotech saphire rev-a 
CoolingOSMonitorMonitor
XSPC Rasa universal gpu Windows 7 Ultimate 64 Samsung SyncMaster B2030 Samsung SyncMaster 923nw  
KeyboardPowerCaseMouse
Saitek Eclipse II Thermaltake tr-2 500w Silverstone Raven RV03 Razer DeathAdder 
Mouse Pad
Razer Exactmat 
CPUMotherboardGraphicsHard Drive
Athlon II X2 MSI 870-G45 HD4550 Western Digital 
Optical DriveCoolingOSCase
ASUS DVD-rw Thermalright Ultra 120 Windows 7 Ultimate 64 Cooler Master HAF-912 
  hide details  
Reply
post #3545 of 8112
Quote:
Originally Posted by Tslm View Post

I think youd be wasting your money, denebs are good little cpus and it's a pretty nice fit with a 5850. I'd keep your money and save for a nice cheap 23inch monitor thumb.gif

So i should wait for Asus to see what they will do with my motherboard? Im kinda new to RMA thingy and i doubt there are any new CIIIF boards in stock with them since there are already 2 newer versions...
Graveyard
(18 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core I5 6600K Asus SABERTOOTH Z170 S Intel Z170 Asus GTX1060 Turbo 6GB GDDR5 G.Skill Ripjaws 4 Red DDR4 8GB 2400MHz CAS15 
Hard DriveHard DriveHard DriveCooling
Western Digital Caviar Blue Seagate Barracuda SATAIII 64MB (6GB/S) Samsung Evo 850 SSD 2.5 SATA III Raijintek Triton CORE Watercooling 240mm 
CoolingOSMonitorKeyboard
CoolerMaster SickleFlow Red 2000 RPM Microsoft Windows 10 Profissional 64Bit Panasonic TX-L32E5E Razer Deathstalker Expert 
PowerCaseMouseMouse Pad
Nox Hummer 80 PLUS Bronze 750W NZXT Source 340 - White Logitech G602 Asus GM50 
Other
Logitech F310 Gamepad 
  hide details  
Reply
Graveyard
(18 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core I5 6600K Asus SABERTOOTH Z170 S Intel Z170 Asus GTX1060 Turbo 6GB GDDR5 G.Skill Ripjaws 4 Red DDR4 8GB 2400MHz CAS15 
Hard DriveHard DriveHard DriveCooling
Western Digital Caviar Blue Seagate Barracuda SATAIII 64MB (6GB/S) Samsung Evo 850 SSD 2.5 SATA III Raijintek Triton CORE Watercooling 240mm 
CoolingOSMonitorKeyboard
CoolerMaster SickleFlow Red 2000 RPM Microsoft Windows 10 Profissional 64Bit Panasonic TX-L32E5E Razer Deathstalker Expert 
PowerCaseMouseMouse Pad
Nox Hummer 80 PLUS Bronze 750W NZXT Source 340 - White Logitech G602 Asus GM50 
Other
Logitech F310 Gamepad 
  hide details  
Reply
post #3546 of 8112
Vedaire-

A full load temp of 42C is good. Crank up the speed.
Edited by AMD4ME - 2/9/12 at 6:54am
post #3547 of 8112
I certainly agree that all FX chips are different and its difficult to give someone step by step directions on how to overclock their particular cpu. I also. Think that motherboards are a big part of that as well. Axipher(sorry put cypher lol) has the same fatal1ty board as me and we both use 50% LLC but his has 0 vdroop under load and on mine at same LLC settings droops from 1.47 to 1.41volts (which is good for my overclock actually)

Sent 4rm my Phone, excuse the grammar...
    
CPUMotherboardGraphicsRAM
FX-8320 ASRock 990fx Fatal1ty Pro 2x XFX DD R7950 xfiredX G. Skill ARES 
Hard DriveOptical DriveCoolingOS
Crucial M4 SSD 2x128GB Raid 0 Blu-Ray Burner Corsair H100 Windows Server 2012 R2 
MonitorMonitorKeyboardPower
49" Sceptre 4k 3820x2160p Samsung 23" 1080p 120hz  Thermaltake tt e-sports Mechanical Cooler Master Silent Pro 700 Watt Modular 
CaseMouseMouse PadAudio
Cooler Master Haf X Full Tower Logitech G500 Rocketfish Con+roL Walmart Logitechs 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
FX-8320 ASRock 990fx Fatal1ty Pro 2x XFX DD R7950 xfiredX G. Skill ARES 
Hard DriveOptical DriveCoolingOS
Crucial M4 SSD 2x128GB Raid 0 Blu-Ray Burner Corsair H100 Windows Server 2012 R2 
MonitorMonitorKeyboardPower
49" Sceptre 4k 3820x2160p Samsung 23" 1080p 120hz  Thermaltake tt e-sports Mechanical Cooler Master Silent Pro 700 Watt Modular 
CaseMouseMouse PadAudio
Cooler Master Haf X Full Tower Logitech G500 Rocketfish Con+roL Walmart Logitechs 
  hide details  
Reply
post #3548 of 8112
Quote:
Originally Posted by DarkShooter View Post

So i should wait for Asus to see what they will do with my motherboard? Im kinda new to RMA thingy and i doubt there are any new CIIIF boards in stock with them since there are already 2 newer versions...

you will most likely get another Crosshair 3 Formula back i sent mine in for rma a while back before i sold it and got a brand new one back dont be so sure they dont have it ive even rma my AM2+ M3N78 pro earlier this year and got one back

I also agree with darkshooter there is no one size fits all voltage and OC setting for fx chips voltages are honestly all over the place ive seen guys run 4.6 at 1.41v and 4.8 at 1.45 on fx 8120s and fx 8150s but then people like me need that much voltage for 1.45 it really just depends on the board and chip

also quick note is anyone else impressed with the memory clocking on the fx chips?? ive managed ddr3 2300+ and 2260 at 9-11-9-28 at 1.65v on my 8gb ripjaws kit
Edited by racer86 - 2/9/12 at 7:27am
post #3549 of 8112
Quote:
Originally Posted by dstoler View Post

I certainly agree that all FX chips are different and its difficult to give someone step by step directions on how to overclock their particular cpu. I also. Think that motherboards are a big part of that as well. Axipher(sorry put cypher lol) has the same fatal1ty board as me and we both use 50% LLC but his has 0 vdroop under load and on mine at same LLC settings droops from 1.47 to 1.41volts (which is good for my overclock actually)

Sent 4rm my Phone, excuse the grammar...

Ya, I can't figure out why you're getting vdroop and I'm not.

From Idle to load, CoreTemp reports the exact voltage I set in BIOS, as well as HWMonitor, and CPU-z always show my voltage about 0.15 V lower, but consistent.

I still have yet to take my DMM to the board and measure the exact voltage, but seeing as HWMonitor and CoreTemp are remaining within 0.05 V from idle to load, I'm not expecting a change. Out of curiosity, where are you getting your VDroop measurements from?
CHILZ - Lan Rig
(17 items)
 
CANARY - Main Rig
(16 items)
 
CADILLAC - HTPC
(14 items)
 
CPUMotherboardGraphicsRAM
Intel i5-4570s Asus H97M-Plus AMD R9 280 G.Skill RipjawsX 16 GB (2x8) 
Hard DriveHard DriveHard DriveCooling
250 GB Samsung 840 240 GB Kingston 3 TB USB 3.0 Drive Custom Loop 
OSMonitorKeyboardPower
Windows 10 Preview BenQ GL2450 Filco MajesTouch2 Ninja PC P&C Silencer Mk III 600 W 
CaseMouseMouse PadAudio
Fractal Design Core 1000 Mionix Castor Monoprice XXL JL Amps + Custom Morel Bookshelf speakers 
Other
Scythe Kama-Panel 3 
CPUMotherboardGraphicsRAM
FX-8150 @ 4.6 GHz Fatal1ty 990FX Pro 9800 GTX+ 512 MB G.Skill Ripjaws X 1866 CL9 
Hard DriveHard DriveCoolingOS
120 GB OCZ Vertex 3 1 TB WD Black 5x 120mm + MCP350 + EK Supreme HF + MicroRes Windows 8 Consumer Preview 
MonitorKeyboardPowerCase
2x Dell U2212HM Logitech G110 Cooler Master 850W Silent Pro Cooler Master 690 II Adv. 
MouseMouse PadAudio
Razer Death Adder 3.5G Staples Gel Cushion Asus Xonar DG + Senn. PC333D 
CPUMotherboardGraphicsRAM
Q6600 Acer X1800 ATI 5670 2 GB Kingston 
Hard DriveOptical DriveOSMonitor
2 TB WD Green Asus BD-R Windows 7 Home Premium Sony 50" LCD 
KeyboardPowerCaseMouse
Acer Media 220 W SFF Acer X1800 Acer Optical 
Mouse PadAudio
The TV cabinet Denon 2808 7.1 AVR + Dahlquist 350W 8" Sub + Kl... 
  hide details  
Reply
CHILZ - Lan Rig
(17 items)
 
CANARY - Main Rig
(16 items)
 
CADILLAC - HTPC
(14 items)
 
CPUMotherboardGraphicsRAM
Intel i5-4570s Asus H97M-Plus AMD R9 280 G.Skill RipjawsX 16 GB (2x8) 
Hard DriveHard DriveHard DriveCooling
250 GB Samsung 840 240 GB Kingston 3 TB USB 3.0 Drive Custom Loop 
OSMonitorKeyboardPower
Windows 10 Preview BenQ GL2450 Filco MajesTouch2 Ninja PC P&C Silencer Mk III 600 W 
CaseMouseMouse PadAudio
Fractal Design Core 1000 Mionix Castor Monoprice XXL JL Amps + Custom Morel Bookshelf speakers 
Other
Scythe Kama-Panel 3 
CPUMotherboardGraphicsRAM
FX-8150 @ 4.6 GHz Fatal1ty 990FX Pro 9800 GTX+ 512 MB G.Skill Ripjaws X 1866 CL9 
Hard DriveHard DriveCoolingOS
120 GB OCZ Vertex 3 1 TB WD Black 5x 120mm + MCP350 + EK Supreme HF + MicroRes Windows 8 Consumer Preview 
MonitorKeyboardPowerCase
2x Dell U2212HM Logitech G110 Cooler Master 850W Silent Pro Cooler Master 690 II Adv. 
MouseMouse PadAudio
Razer Death Adder 3.5G Staples Gel Cushion Asus Xonar DG + Senn. PC333D 
CPUMotherboardGraphicsRAM
Q6600 Acer X1800 ATI 5670 2 GB Kingston 
Hard DriveOptical DriveOSMonitor
2 TB WD Green Asus BD-R Windows 7 Home Premium Sony 50" LCD 
KeyboardPowerCaseMouse
Acer Media 220 W SFF Acer X1800 Acer Optical 
Mouse PadAudio
The TV cabinet Denon 2808 7.1 AVR + Dahlquist 350W 8" Sub + Kl... 
  hide details  
Reply
post #3550 of 8112

Announcement:
Turns out that the ASUS Crosshair 5 Formula club happens to need a new owner. Tweeky has asked me (pioneerisloud) to find a replacement as he would like to retire from this club. If anybody would like to take ownership of this club, and keep it updated daily, please shoot me (pioneerisloud) a PM with the title "Crosshair V Application", and tell me why we should pick you as the replacement.

Thanks,
~pio

pioneerisloud   http://www.overclock.net/u/41518/pioneerisloud

 


 

    
CPUMotherboardGraphicsRAM
FX-8150 @ 4389 MHz Crosshair V Formula 2 @ XFX-695X-ZDDC Crossfire G.skill F3-16000CL7D-4GBFLS 
Hard DriveHard DriveOptical DriveCooling
2 @ MKNSSD120GB-DX SSD SATA III Raid 0 2 WD 640GB Blacks SATA III Raid 0 2-Liteon iHAS424-98 LS Zalman 9900 Max Red 
OSMonitorKeyboardPower
Win 7 64 bit SP1 Samsung PX2370 Logitech MK700 Thermaltake TR2 850w 
CaseMouseAudioOther
Cooler Master ATCS 840 Logitech M705 Supreme FX X-Fi 2 AFT card reader USB 3.0 PRO-57U 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
FX-8150 @ 4389 MHz Crosshair V Formula 2 @ XFX-695X-ZDDC Crossfire G.skill F3-16000CL7D-4GBFLS 
Hard DriveHard DriveOptical DriveCooling
2 @ MKNSSD120GB-DX SSD SATA III Raid 0 2 WD 640GB Blacks SATA III Raid 0 2-Liteon iHAS424-98 LS Zalman 9900 Max Red 
OSMonitorKeyboardPower
Win 7 64 bit SP1 Samsung PX2370 Logitech MK700 Thermaltake TR2 850w 
CaseMouseAudioOther
Cooler Master ATCS 840 Logitech M705 Supreme FX X-Fi 2 AFT card reader USB 3.0 PRO-57U 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: AMD CPUs
Overclock.net › Forums › AMD › AMD CPUs › AMD FX (Bulldozer) Owners Club!