Overclock.net › Forums › Graphics Cards › NVIDIA › NVIDIA [GTX 560/560 Ti] OC Club
New Posts  All Forums:Forum Nav:

NVIDIA [GTX 560/560 Ti] OC Club - Page 37

post #361 of 810
Plz Add Me biggrin.gif

http://3dmark.com/3dm11/1865649
450
450450
Evolved
(25 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 5820K X99A RAIDER (MS-7885) NVIDIA GeForce GTX 980 Ti asus Poseidon Corsair  
RAMRAMRAMHard Drive
Corsair  Corsair  PNY Electronics  PCI revodrive 3 
Hard DriveOptical DriveCoolingCooling
ssd samsung  LG BLu-ray. XPC water block XPC 360 Radiator 
CoolingCoolingOSMonitor
XPC 240 Radiator Swifttech Pumb Windows 10 PHillips 40'' 4k Monitor 
KeyboardPowerCaseMouse
Corsair k70 Mecha AX 1500i Corsair 900D Corsair m65, Razer naga, Logitech g700 
Mouse PadAudioOtherOther
steel series mousepad Soundblaster Z, Yamaha rx-v677 Infinity Speakers X 7, Jbl Subwoofer, vanther &... Audeze LCD-2 
Other
FIIO K5 headphone AMP 
  hide details  
Reply
Evolved
(25 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 5820K X99A RAIDER (MS-7885) NVIDIA GeForce GTX 980 Ti asus Poseidon Corsair  
RAMRAMRAMHard Drive
Corsair  Corsair  PNY Electronics  PCI revodrive 3 
Hard DriveOptical DriveCoolingCooling
ssd samsung  LG BLu-ray. XPC water block XPC 360 Radiator 
CoolingCoolingOSMonitor
XPC 240 Radiator Swifttech Pumb Windows 10 PHillips 40'' 4k Monitor 
KeyboardPowerCaseMouse
Corsair k70 Mecha AX 1500i Corsair 900D Corsair m65, Razer naga, Logitech g700 
Mouse PadAudioOtherOther
steel series mousepad Soundblaster Z, Yamaha rx-v677 Infinity Speakers X 7, Jbl Subwoofer, vanther &... Audeze LCD-2 
Other
FIIO K5 headphone AMP 
  hide details  
Reply
post #362 of 810


Edited by solheimhltv - 12/31/11 at 5:35am
post #363 of 810
Hi,


So, I got my weird 560 Ti less than a week ago and I've been overclocking it a bit but I haven't touched Voltage yet.

950/1900/2200 actually failed at Unigine Heaven so I down clocked to 900/1800/2100 for the moment which has absolutely no stability issues.

My stock and current Voltage is 1.012V.

My PSU is an OCZ stealthXstream 2 700W.
My CPU is an stock i7-860.
I've got 4gig dual channel 665 mhz ram.


What I need here is anything tip or info you can give about 560 ti overclocking wether it's personnal experience or stuff you've read.

Thank you smile.gif.
Current rig
(16 items)
 
   
CPUMotherboardGraphicsRAM
i7-860 @3800MHz P7P55D R9 290 @1150/1450MHz 2*4GB Hyper X Black @1600 MHz 
Hard DriveCoolingOSMonitor
Crucial M4 64 Gig (7mm version) Custom Water Cooling, details in signature. Windows 8 Pro LG Flatron W2243S 21.5" 1080p 
KeyboardPowerCaseMouse
Razer Lycosa OCZ StealthXstream 2 700W Fractal Design Arc Midi R2 Razer Deathadder 3500dpi 
Mouse PadAudioOtherOther
Razer Scarab Razer Carcharias V2 (X360/PC) Roccat Apuri mouse Bungee / usb hub Samsung HDD 7200 rpm 1To 
CPUGraphicsPowerOther
EK Supreme HF CU Full copper EK-FC R9-290X - Nickel  MCP350 Alphacool DDC plexi top 
OtherOtherOtherOther
EK Coolstream XTC 280mm + 2x D14SM-12 Yate Loon... EK Coolstream XTC 280mm + 4x Akasa Apache (push... Alphacool Cape Corp Coolplex 250ml reservoir 8/11mm ClearFlex60 tubing 
OtherOther
Mayhems Blue Berry Pastel + 9mL Mayhems blue dye Phobya fittings: 2x 45° | 2x 90° | 6x Straight 
  hide details  
Reply
Current rig
(16 items)
 
   
CPUMotherboardGraphicsRAM
i7-860 @3800MHz P7P55D R9 290 @1150/1450MHz 2*4GB Hyper X Black @1600 MHz 
Hard DriveCoolingOSMonitor
Crucial M4 64 Gig (7mm version) Custom Water Cooling, details in signature. Windows 8 Pro LG Flatron W2243S 21.5" 1080p 
KeyboardPowerCaseMouse
Razer Lycosa OCZ StealthXstream 2 700W Fractal Design Arc Midi R2 Razer Deathadder 3500dpi 
Mouse PadAudioOtherOther
Razer Scarab Razer Carcharias V2 (X360/PC) Roccat Apuri mouse Bungee / usb hub Samsung HDD 7200 rpm 1To 
CPUGraphicsPowerOther
EK Supreme HF CU Full copper EK-FC R9-290X - Nickel  MCP350 Alphacool DDC plexi top 
OtherOtherOtherOther
EK Coolstream XTC 280mm + 2x D14SM-12 Yate Loon... EK Coolstream XTC 280mm + 4x Akasa Apache (push... Alphacool Cape Corp Coolplex 250ml reservoir 8/11mm ClearFlex60 tubing 
OtherOther
Mayhems Blue Berry Pastel + 9mL Mayhems blue dye Phobya fittings: 2x 45° | 2x 90° | 6x Straight 
  hide details  
Reply
post #364 of 810
Quote:
Originally Posted by steelkevin View Post

Hi,
So, I got my weird 560 Ti less than a week ago and I've been overclocking it a bit but I haven't touched Voltage yet.
950/1900/2200 actually failed at Unigine Heaven so I down clocked to 900/1800/2100 for the moment which has absolutely no stability issues.
My stock and current Voltage is 1.012V.
My PSU is an OCZ stealthXstream 2 700W.
My CPU is an stock i7-860.
I've got 4gig dual channel 665 mhz ram.
What I need here is anything tip or info you can give about 560 ti overclocking wether it's personnal experience or stuff you've read.
Thank you smile.gif.

I would bump up the volts alittle and keep going on the core until your satisfiably stable. Then work on the mem clock. I havent tried unlinking the core and shader clock I usually keep them linked. Your idle voltage is diifferent than when the card is under load, which then the voltage increases to the value you have set. I would use MSI afterburner if you arent already for overclocking. Also what temps are you at with your current overclock.
Ivy
(19 items)
 
fiance pc
(12 items)
 
 
CPUMotherboardGraphicsRAM
i5 3570K ASRock Extreme4 Z77 eVGA GTX 660 Ti Corsair Dominator DDR3 
Hard DriveHard DriveOptical DriveCooling
Seagate Barricuda 32MB Cache 7200RPM OCZ Vertex 3 SSD TSSTcorp CDDVDW SH-S223B ATA XSPC Raystorm(Intel) 
CoolingCoolingCoolingOS
XSPC Razor GTX 570 Magicool Slim 140mmX2 Radiator XSPC Res+Pump Combo Windows 7 Professional 
MonitorKeyboardPowerCase
Asus 22in Widescreen 1680x1050 I-Rocks Light up Rosewill Xtreme 850W Green NZXT M59 
MouseMouse PadAudio
Logitech G500 Steelseries Qck+ Steelseries Siberia v1 Headset with USB Soundcard 
CPUMotherboardGraphicsRAM
Core 2 Quad Q9550 Gigabyte EP45T-UD3LR nVidia Geforce GTX 260 Core 216 Corsair Dominator DDR3 1333MHz 
Hard DriveCoolingOSMonitor
Seagate Barricuda 7200RPM XSPC Raystorm CPU (Intel) Windows 7 x64 HP 
KeyboardPowerMouseAudio
Logisys Light Up 650Watt 10 dollar special Steelseries 
  hide details  
Reply
Ivy
(19 items)
 
fiance pc
(12 items)
 
 
CPUMotherboardGraphicsRAM
i5 3570K ASRock Extreme4 Z77 eVGA GTX 660 Ti Corsair Dominator DDR3 
Hard DriveHard DriveOptical DriveCooling
Seagate Barricuda 32MB Cache 7200RPM OCZ Vertex 3 SSD TSSTcorp CDDVDW SH-S223B ATA XSPC Raystorm(Intel) 
CoolingCoolingCoolingOS
XSPC Razor GTX 570 Magicool Slim 140mmX2 Radiator XSPC Res+Pump Combo Windows 7 Professional 
MonitorKeyboardPowerCase
Asus 22in Widescreen 1680x1050 I-Rocks Light up Rosewill Xtreme 850W Green NZXT M59 
MouseMouse PadAudio
Logitech G500 Steelseries Qck+ Steelseries Siberia v1 Headset with USB Soundcard 
CPUMotherboardGraphicsRAM
Core 2 Quad Q9550 Gigabyte EP45T-UD3LR nVidia Geforce GTX 260 Core 216 Corsair Dominator DDR3 1333MHz 
Hard DriveCoolingOSMonitor
Seagate Barricuda 7200RPM XSPC Raystorm CPU (Intel) Windows 7 x64 HP 
KeyboardPowerMouseAudio
Logisys Light Up 650Watt 10 dollar special Steelseries 
  hide details  
Reply
post #365 of 810
First things first, idle voltage is 0.95V.
It runs at 26° idle right now (with these clocks and voltage). The fan's running at 960 rpm being 26% speed.

I didn't even know core and shader clocks could be unlinked. I even found weird that some Manufacturer OCs for the 560ti were 950/1700 lol.
I think I'll keep them linked as for some reason it makes sense to me ^^.


Right now, my rig's in a crappy Dell XPS 8100 case so I wouldn't be surprised if next monday evening when I get home and put my rig into my Phantom (which is waiting for me in my bedroom...) the temps are even lower.

I'll list you the software I've got for Benchmarking and overclocking:
-Afterburner
-Kombustor
-Performance Test (64-bit) (it's from passmark softare I think)
-Heaven DX11 2.5
-FurMark
-OCCT
-3DMark 11 (free version, not the full one).

Also have both GPU and CPU-Z.
Current rig
(16 items)
 
   
CPUMotherboardGraphicsRAM
i7-860 @3800MHz P7P55D R9 290 @1150/1450MHz 2*4GB Hyper X Black @1600 MHz 
Hard DriveCoolingOSMonitor
Crucial M4 64 Gig (7mm version) Custom Water Cooling, details in signature. Windows 8 Pro LG Flatron W2243S 21.5" 1080p 
KeyboardPowerCaseMouse
Razer Lycosa OCZ StealthXstream 2 700W Fractal Design Arc Midi R2 Razer Deathadder 3500dpi 
Mouse PadAudioOtherOther
Razer Scarab Razer Carcharias V2 (X360/PC) Roccat Apuri mouse Bungee / usb hub Samsung HDD 7200 rpm 1To 
CPUGraphicsPowerOther
EK Supreme HF CU Full copper EK-FC R9-290X - Nickel  MCP350 Alphacool DDC plexi top 
OtherOtherOtherOther
EK Coolstream XTC 280mm + 2x D14SM-12 Yate Loon... EK Coolstream XTC 280mm + 4x Akasa Apache (push... Alphacool Cape Corp Coolplex 250ml reservoir 8/11mm ClearFlex60 tubing 
OtherOther
Mayhems Blue Berry Pastel + 9mL Mayhems blue dye Phobya fittings: 2x 45° | 2x 90° | 6x Straight 
  hide details  
Reply
Current rig
(16 items)
 
   
CPUMotherboardGraphicsRAM
i7-860 @3800MHz P7P55D R9 290 @1150/1450MHz 2*4GB Hyper X Black @1600 MHz 
Hard DriveCoolingOSMonitor
Crucial M4 64 Gig (7mm version) Custom Water Cooling, details in signature. Windows 8 Pro LG Flatron W2243S 21.5" 1080p 
KeyboardPowerCaseMouse
Razer Lycosa OCZ StealthXstream 2 700W Fractal Design Arc Midi R2 Razer Deathadder 3500dpi 
Mouse PadAudioOtherOther
Razer Scarab Razer Carcharias V2 (X360/PC) Roccat Apuri mouse Bungee / usb hub Samsung HDD 7200 rpm 1To 
CPUGraphicsPowerOther
EK Supreme HF CU Full copper EK-FC R9-290X - Nickel  MCP350 Alphacool DDC plexi top 
OtherOtherOtherOther
EK Coolstream XTC 280mm + 2x D14SM-12 Yate Loon... EK Coolstream XTC 280mm + 4x Akasa Apache (push... Alphacool Cape Corp Coolplex 250ml reservoir 8/11mm ClearFlex60 tubing 
OtherOther
Mayhems Blue Berry Pastel + 9mL Mayhems blue dye Phobya fittings: 2x 45° | 2x 90° | 6x Straight 
  hide details  
Reply
post #366 of 810
Quote:
Originally Posted by steelkevin View Post

First things first, idle voltage is 0.95V.
It runs at 26° idle right now (with these clocks and voltage). The fan's running at 960 rpm being 26% speed.
I didn't even know core and shader clocks could be unlinked. I even found weird that some Manufacturer OCs for the 560ti were 950/1700 lol.
I think I'll keep them linked as for some reason it makes sense to me ^^.
Right now, my rig's in a crappy Dell XPS 8100 case so I wouldn't be surprised if next monday evening when I get home and put my rig into my Phantom (which is waiting for me in my bedroom...) the temps are even lower.
I'll list you the software I've got for Benchmarking and overclocking:
-Afterburner
-Kombustor
-Performance Test (64-bit) (it's from passmark softare I think)
-Heaven DX11 2.5
-FurMark
-OCCT
-3DMark 11 (free version, not the full one).
Also have both GPU and CPU-Z.

To find load voltage, in afterburner make sure you have voltage control unlocked and your monitoring it in a graph and you can put the gfx card under a load(3dmark, furmark) and you will see it go up. Also you can lock the fan speed at 100% in afterburner if you want temps to be ideal(the fan can get annoying tho). My card stock is 900MHz core and ive made it to 1050 only. I idle at around 24(im on water) and the case probably wont make that much of a difference with the graphics temps atleast it hasnt in my experience of keeping it at 100% fan speed. What really matters is the temp when its under a load and how hot it gets. Also when overclocking you might find black holes(certain areas in core speed that it will not run at) which you would have to try going higher but not without upping the voltage. Furmark is a great stability test and temp test. Once youve got a satisfying overclock, run 3dmark and see how you compare! Graphics cards are alot easier (excluding volt modded stuff) to overclock than cpu/ram in my experience.
Ivy
(19 items)
 
fiance pc
(12 items)
 
 
CPUMotherboardGraphicsRAM
i5 3570K ASRock Extreme4 Z77 eVGA GTX 660 Ti Corsair Dominator DDR3 
Hard DriveHard DriveOptical DriveCooling
Seagate Barricuda 32MB Cache 7200RPM OCZ Vertex 3 SSD TSSTcorp CDDVDW SH-S223B ATA XSPC Raystorm(Intel) 
CoolingCoolingCoolingOS
XSPC Razor GTX 570 Magicool Slim 140mmX2 Radiator XSPC Res+Pump Combo Windows 7 Professional 
MonitorKeyboardPowerCase
Asus 22in Widescreen 1680x1050 I-Rocks Light up Rosewill Xtreme 850W Green NZXT M59 
MouseMouse PadAudio
Logitech G500 Steelseries Qck+ Steelseries Siberia v1 Headset with USB Soundcard 
CPUMotherboardGraphicsRAM
Core 2 Quad Q9550 Gigabyte EP45T-UD3LR nVidia Geforce GTX 260 Core 216 Corsair Dominator DDR3 1333MHz 
Hard DriveCoolingOSMonitor
Seagate Barricuda 7200RPM XSPC Raystorm CPU (Intel) Windows 7 x64 HP 
KeyboardPowerMouseAudio
Logisys Light Up 650Watt 10 dollar special Steelseries 
  hide details  
Reply
Ivy
(19 items)
 
fiance pc
(12 items)
 
 
CPUMotherboardGraphicsRAM
i5 3570K ASRock Extreme4 Z77 eVGA GTX 660 Ti Corsair Dominator DDR3 
Hard DriveHard DriveOptical DriveCooling
Seagate Barricuda 32MB Cache 7200RPM OCZ Vertex 3 SSD TSSTcorp CDDVDW SH-S223B ATA XSPC Raystorm(Intel) 
CoolingCoolingCoolingOS
XSPC Razor GTX 570 Magicool Slim 140mmX2 Radiator XSPC Res+Pump Combo Windows 7 Professional 
MonitorKeyboardPowerCase
Asus 22in Widescreen 1680x1050 I-Rocks Light up Rosewill Xtreme 850W Green NZXT M59 
MouseMouse PadAudio
Logitech G500 Steelseries Qck+ Steelseries Siberia v1 Headset with USB Soundcard 
CPUMotherboardGraphicsRAM
Core 2 Quad Q9550 Gigabyte EP45T-UD3LR nVidia Geforce GTX 260 Core 216 Corsair Dominator DDR3 1333MHz 
Hard DriveCoolingOSMonitor
Seagate Barricuda 7200RPM XSPC Raystorm CPU (Intel) Windows 7 x64 HP 
KeyboardPowerMouseAudio
Logisys Light Up 650Watt 10 dollar special Steelseries 
  hide details  
Reply
post #367 of 810
To get the load coltage I simply used MSI Kombustor. It tells you on the right side smile.gif.

And I won't up my fan speed to 100% (it only goes up to 78% btw for some reason) because it'd wake up the whole neighbourhood. It's silent as it is. and it didn't affect temps much when maxed so I'll leave the fan speeds on auto for now.

http://www.ozone3d.net/benchmarks/furmark_192_score.php?id=23845

Was actually at 79°, never saw it go up to 80° but if it says so.

Activated both editing and monitor of Voltage but forgot to add the voltage graph -_-


And yeah, load voltage is indeed 1.012V, just ran furmark again and checked after it was at full load and 79°
Edited by steelkevin - 12/30/11 at 10:15am
Current rig
(16 items)
 
   
CPUMotherboardGraphicsRAM
i7-860 @3800MHz P7P55D R9 290 @1150/1450MHz 2*4GB Hyper X Black @1600 MHz 
Hard DriveCoolingOSMonitor
Crucial M4 64 Gig (7mm version) Custom Water Cooling, details in signature. Windows 8 Pro LG Flatron W2243S 21.5" 1080p 
KeyboardPowerCaseMouse
Razer Lycosa OCZ StealthXstream 2 700W Fractal Design Arc Midi R2 Razer Deathadder 3500dpi 
Mouse PadAudioOtherOther
Razer Scarab Razer Carcharias V2 (X360/PC) Roccat Apuri mouse Bungee / usb hub Samsung HDD 7200 rpm 1To 
CPUGraphicsPowerOther
EK Supreme HF CU Full copper EK-FC R9-290X - Nickel  MCP350 Alphacool DDC plexi top 
OtherOtherOtherOther
EK Coolstream XTC 280mm + 2x D14SM-12 Yate Loon... EK Coolstream XTC 280mm + 4x Akasa Apache (push... Alphacool Cape Corp Coolplex 250ml reservoir 8/11mm ClearFlex60 tubing 
OtherOther
Mayhems Blue Berry Pastel + 9mL Mayhems blue dye Phobya fittings: 2x 45° | 2x 90° | 6x Straight 
  hide details  
Reply
Current rig
(16 items)
 
   
CPUMotherboardGraphicsRAM
i7-860 @3800MHz P7P55D R9 290 @1150/1450MHz 2*4GB Hyper X Black @1600 MHz 
Hard DriveCoolingOSMonitor
Crucial M4 64 Gig (7mm version) Custom Water Cooling, details in signature. Windows 8 Pro LG Flatron W2243S 21.5" 1080p 
KeyboardPowerCaseMouse
Razer Lycosa OCZ StealthXstream 2 700W Fractal Design Arc Midi R2 Razer Deathadder 3500dpi 
Mouse PadAudioOtherOther
Razer Scarab Razer Carcharias V2 (X360/PC) Roccat Apuri mouse Bungee / usb hub Samsung HDD 7200 rpm 1To 
CPUGraphicsPowerOther
EK Supreme HF CU Full copper EK-FC R9-290X - Nickel  MCP350 Alphacool DDC plexi top 
OtherOtherOtherOther
EK Coolstream XTC 280mm + 2x D14SM-12 Yate Loon... EK Coolstream XTC 280mm + 4x Akasa Apache (push... Alphacool Cape Corp Coolplex 250ml reservoir 8/11mm ClearFlex60 tubing 
OtherOther
Mayhems Blue Berry Pastel + 9mL Mayhems blue dye Phobya fittings: 2x 45° | 2x 90° | 6x Straight 
  hide details  
Reply
post #368 of 810
My Galaxy card's stock voltage is also 1.012. I currently have both cards at 950/1900/2100. I upped the voltage on the Galaxy card to 1.050 just to be a little safer on the oc since I sometimes would get crashes in bf3 (big surprise I know). It ran benches just fine at the stock voltage, but the little bump seems to have helped with stability and doesn't add much heat. I'd bump the voltage a bit at a time as mentioned and you should be able to clock it to at least 950. Just keep an eye on temps.
John Henry
(19 items)
 
  
CPUMotherboardGraphicsRAM
Core i5 4690k @4.4 Asus ROG Maximus VII MSI GTX 980 Gaming 4G G.SKILL Ares 8GBx2 
Hard DriveHard DriveHard DriveHard Drive
Samsung Spinpoint F3 Crucial M4 SSD PNY XLR8 SSD Mushkin Eco3 SSD 
Optical DriveCoolingOSMonitor
Asus Cooler Master Hyper 212 Plus Windows 10 Asus VH238H 
MonitorKeyboardPowerCase
3x20" Dell Logitech G13 / Dell KB PC Power and Cooling 760w Silencer Lan Boy Air 
MouseMouse PadAudio
Logitech G500 Rocketfish Astro A40 
  hide details  
Reply
John Henry
(19 items)
 
  
CPUMotherboardGraphicsRAM
Core i5 4690k @4.4 Asus ROG Maximus VII MSI GTX 980 Gaming 4G G.SKILL Ares 8GBx2 
Hard DriveHard DriveHard DriveHard Drive
Samsung Spinpoint F3 Crucial M4 SSD PNY XLR8 SSD Mushkin Eco3 SSD 
Optical DriveCoolingOSMonitor
Asus Cooler Master Hyper 212 Plus Windows 10 Asus VH238H 
MonitorKeyboardPowerCase
3x20" Dell Logitech G13 / Dell KB PC Power and Cooling 760w Silencer Lan Boy Air 
MouseMouse PadAudio
Logitech G500 Rocketfish Astro A40 
  hide details  
Reply
post #369 of 810
Quote:
Originally Posted by steelkevin View Post

To get the load coltage I simply used MSI Kombustor. It tells you on the right side smile.gif.
And I won't up my fan speed to 100% (it only goes up to 78% btw for some reason) because it'd wake up the whole neighbourhood. It's silent as it is. and it didn't affect temps much when maxed so I'll leave the fan speeds on auto for now.
http://www.ozone3d.net/benchmarks/furmark_192_score.php?id=23845
Was actually at 79°, never saw it go up to 80° but if it says so.
Activated both editing and monitor of Voltage but forgot to add the voltage graph -_-
And yeah, load voltage is indeed 1.012V, just ran furmark again and checked after it was at full load and 79°

yeah your playing with fire(almost literally). thats pretty hot. if your gonna oc and dont want to hurt anything. i would turn the fan speed up when its being used cause your cookin. if you up the voltage or oc any higher remember to watch the temps, you dont wanna fry a card you just got. atleast not for a few weeks.
Ivy
(19 items)
 
fiance pc
(12 items)
 
 
CPUMotherboardGraphicsRAM
i5 3570K ASRock Extreme4 Z77 eVGA GTX 660 Ti Corsair Dominator DDR3 
Hard DriveHard DriveOptical DriveCooling
Seagate Barricuda 32MB Cache 7200RPM OCZ Vertex 3 SSD TSSTcorp CDDVDW SH-S223B ATA XSPC Raystorm(Intel) 
CoolingCoolingCoolingOS
XSPC Razor GTX 570 Magicool Slim 140mmX2 Radiator XSPC Res+Pump Combo Windows 7 Professional 
MonitorKeyboardPowerCase
Asus 22in Widescreen 1680x1050 I-Rocks Light up Rosewill Xtreme 850W Green NZXT M59 
MouseMouse PadAudio
Logitech G500 Steelseries Qck+ Steelseries Siberia v1 Headset with USB Soundcard 
CPUMotherboardGraphicsRAM
Core 2 Quad Q9550 Gigabyte EP45T-UD3LR nVidia Geforce GTX 260 Core 216 Corsair Dominator DDR3 1333MHz 
Hard DriveCoolingOSMonitor
Seagate Barricuda 7200RPM XSPC Raystorm CPU (Intel) Windows 7 x64 HP 
KeyboardPowerMouseAudio
Logisys Light Up 650Watt 10 dollar special Steelseries 
  hide details  
Reply
Ivy
(19 items)
 
fiance pc
(12 items)
 
 
CPUMotherboardGraphicsRAM
i5 3570K ASRock Extreme4 Z77 eVGA GTX 660 Ti Corsair Dominator DDR3 
Hard DriveHard DriveOptical DriveCooling
Seagate Barricuda 32MB Cache 7200RPM OCZ Vertex 3 SSD TSSTcorp CDDVDW SH-S223B ATA XSPC Raystorm(Intel) 
CoolingCoolingCoolingOS
XSPC Razor GTX 570 Magicool Slim 140mmX2 Radiator XSPC Res+Pump Combo Windows 7 Professional 
MonitorKeyboardPowerCase
Asus 22in Widescreen 1680x1050 I-Rocks Light up Rosewill Xtreme 850W Green NZXT M59 
MouseMouse PadAudio
Logitech G500 Steelseries Qck+ Steelseries Siberia v1 Headset with USB Soundcard 
CPUMotherboardGraphicsRAM
Core 2 Quad Q9550 Gigabyte EP45T-UD3LR nVidia Geforce GTX 260 Core 216 Corsair Dominator DDR3 1333MHz 
Hard DriveCoolingOSMonitor
Seagate Barricuda 7200RPM XSPC Raystorm CPU (Intel) Windows 7 x64 HP 
KeyboardPowerMouseAudio
Logisys Light Up 650Watt 10 dollar special Steelseries 
  hide details  
Reply
post #370 of 810
Quote:
Originally Posted by aar0nsky View Post

yeah your playing with fire(almost literally). thats pretty hot. if your gonna oc and dont want to hurt anything. i would turn the fan speed up when its being used cause your cookin. if you up the voltage or oc any higher remember to watch the temps, you dont wanna fry a card you just got. atleast not for a few weeks.

It is pretty hot, but considering a tool like Kombustor, FurMark, OCCT, etc. will theoretically stress you GPU well beyond any game, program or benchmark will. Those temps are safe to run at, 100% of the time, if you must, but normally when one uses a stability program like the said programs above, it's normally not running for hours on end.
Workstation
(7 items)
 
  
CPUMotherboardGraphicsRAM
Intel i3 2100 Gigabyte Z68MA-D2H-B3 Asus DCII GTX560 GSkill 2x4GB 1600mhz 
Hard DrivePowerCase
Samsung 830 64GB Corsair CX430v2 Lian Li A04B 
  hide details  
Reply
Workstation
(7 items)
 
  
CPUMotherboardGraphicsRAM
Intel i3 2100 Gigabyte Z68MA-D2H-B3 Asus DCII GTX560 GSkill 2x4GB 1600mhz 
Hard DrivePowerCase
Samsung 830 64GB Corsair CX430v2 Lian Li A04B 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: NVIDIA
Overclock.net › Forums › Graphics Cards › NVIDIA › NVIDIA [GTX 560/560 Ti] OC Club