Overclock.net › Forums › Intel › Intel - General › New build, many problems
New Posts  All Forums:Forum Nav:

New build, many problems

post #1 of 6
Thread Starter 
I build a new computer 2 days ago. Everything seems ok at that time. But yesterday i updated Bios to 2001 and then problems started.

1.My computer run about an hour and then shut down for a second and then power up again.

2. Computer frezzes all time( working normal 20min then freze completely in mozilla.

I am asking for some help here, because i don't know what to do?
I will maybe downgrade Bios(how could i do that) and then reinstall windows?

my system:

i5 2500k
ASUS p8p67 Pro b3 rev3.0
Kingston hyperx blu 1333mhz 2x4Gb
Corsair tx750W v2
Msi gtx 560ti twin frozr ii
samsung spinpoint f3
noctua NH-d14
post #2 of 6
Quote:
Originally Posted by sonix32 View Post
I build a new computer 2 days ago. Everything seems ok at that time. But yesterday i updated Bios to 2001 and then problems started.

1.My computer run about an hour and then shut down for a second and then power up again.

2. Computer frezzes all time( working normal 20min then freze completely in mozilla.

I am asking for some help here, because i don't know what to do?
I will maybe downgrade Bios(how could i do that) and then reinstall windows?

my system:

i5 2500k
ASUS p8p67 Pro b3 rev3.0
Kingston hyperx blu 1333mhz 2x4Gb
Corsair tx750W v2
Msi gtx 560ti twin frozr ii
samsung spinpoint f3
noctua NH-d14
Any BSOD's? Do you have all of the windows updates including the latest drivers?
post #3 of 6
Thread Starter 
No BSOD..as far as i know i have all latest drivers and all updates
post #4 of 6
Quote:
Originally Posted by sonix32 View Post
No BSOD..as far as i know i have all latest drivers and all updates
I don't know how much a reformat would help, but give it a go I remember when I built this sig rig something went iffy along the way and a reformat fixed everything.
post #5 of 6
Thread Starter 
Is it possible to downgrade Bios to it's factory setting?
post #6 of 6
Quote:
Originally Posted by sonix32 View Post
Is it possible to downgrade Bios to it's factory setting?
The bios update shouldn't cause random freezes chances are if something was wrong with it or you didn't update properly your motherboard would be an expensive paper weight.

Edit: here's a link on how to downgrade your bios HERE I'd advise you try reformatting before doing this though.
Edited by evilDSM - 10/13/11 at 6:33am
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel - General
Overclock.net › Forums › Intel › Intel - General › New build, many problems