Overclock.net › Forums › Components › Memory › Help configuring 16GB RAM kit pls
New Posts  All Forums:Forum Nav:

Help configuring 16GB RAM kit pls

post #1 of 3
Thread Starter 
Motherboard: GA-MA770T-UD3P (NewEgg Link)
RAM: F3-12800CL9Q-16GBRL (NewEgg Link)
CPU: AMD Phenom II X6 1100T Black Edition Thuban 3.3GHz, 3.7GHz (NewEgg Link)

I just installed the G.SKILL Ripjaws Series 16GB Kit (listed above for exact) and since my motherboard defaults to 1.6v lowest hardware voltage and I can't get the recommended 1.5v I've read that I could get a little better speed out of the timings? Please help me with the below settings and any info on what I should try for timings and would it even be worth it? This is what I have my BIOS at now and the RAM has been working for oh say 20 minutes with no problems.

Timing is 9-9-9-24 (As recommended by Manufacturer)
DRAM Voltage Control 1.6 (lowest it will allow me to go)

The rest of the settings were all there like this at default so I'm assuming it cant necessarily be best or even right? Anything I should change?

1T/2T Command Timing 2T
write recovery 12T
precharge time 6T
row cycle time 39T
ras to ras delay 5T

basic interleaving (enabled)
channel interleave (enabled)

post #2 of 3
Thread Starter 
Other people are having instability issues at http://gskill.us/forum/showthread.php?t=1387&page=2 but I think they are overclocking everything so maybe I should stay right where I'm at?
post #3 of 3
Thread Starter 


ACC EC FIrmware Selection= Normal
ACC = Auto
CPU Clock Ratio = x18
CPU Northbridge Freq = Normal
CPU Host Clock Control = Auto
CPU Freq= 200 MHz
PCIE Clock= Auto
HT Link Freq= Auto
Memory clock = x8.00 = 1600MHz
DCTs Mode = Unganged
CAS#LAtency = 9T
RAS to CAS R/W delay= 9T
Row Precharge TIme = 9T
Minimum RAS Active Time = 24T
1T/2T Command Timing = 2T
TwTr Command Delay = 5T
Trfc0 for Dimm1 = 127.5ns
Trfc2 for Dimm2 = 127.5ns
Trfc1 for Dimm3 = 127.5ns
Trfc3 for Dimm4 = 127.5ns
Write Recovery Time= 10T
Precharge Time= 5T
Row Cycle Time= 34T
RAs to Ras Delay= 4T
CPU NB VID Control= Normal = 1.2V
CPU Voltage Control= +0.175 = 1.5Vcore
DRAM voltage control= 1.640v
DDR VTT Voltage Control = 1.100V
NB Voltage Control= Normal = 1.200V
SB/HT Voltage control= Normal = 1.300V
NB PCIE Voltage Control= Normal 1.8V

This doesn't seem right?
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Memory
Overclock.net › Forums › Components › Memory › Help configuring 16GB RAM kit pls