Originally Posted by jNSK
The hole's for...filling. They obviously can't accommodate all reservoirs!
You'll be fine using some spare tubing through the hole to fill the reservoir. I did it in my HAF 932.
My RX360 fit into the top of my old HAF 932 easily. Any 360 radiator will fit up there, any bigger and it won't fit without modding.
Furthermore, I used the XSPC Double Bay reservoir in my old 932 too (I had exactly the same water cooling setup as I do in my sig rig) and everything fit perfectly. Just leave a drive-bay space between the top hole and the reservoir so you can fit some tubing into it with a funnel attached to the top of it in order to fill the reservoir.
Good point! +Rep
I don't understand how the reservoir is going to be one bay away from the top of the drive bay without modifying my 932. Does that clamp on the case really hold up the reservoir filled up with distilled water? Also I don't understand how there would be room for it up there, won't there be a 360 radiator at the top(inside) of my case?
Just asking questions to get ready!
One more month till I wait for savings
Originally Posted by FlyingNugget
I have an h100 with 2 GT-AP15. It keeps my i7 920 4ghz 1.2v in mid 60s under load at 25 degree ambient. I could easily push it up to 4.2ghz and still have safe temps. Its very quiet.
I could have bought a 240 or 360 kit for almost the same price and had better cooling. I didnt want to have to maintain my loop or worry about leaks so I got the H100 + AP-15s.
Get the rasa 240/360 kit if you want the best cooling. Get the h100 if you want something safe, quiet and respectfully cool.
Safety good point, +rep (was brought up earlier, but I keep forgetting about it)
I still don't know AP-15s, I'm sure they are fans but I'll search em up.