Overclock.net › Forums › Cooling › Water Cooling › H80 / H80i / H90 / H100 / H100i / H110 Case Compatibility Thread (Page 1 for full listings)
New Posts  All Forums:Forum Nav:

H80 / H80i / H90 / H100 / H100i / H110 Case Compatibility Thread (Page 1 for full listings) - Page 31

post #301 of 1515
Depending on exactly how far forward the mounts are for the top fan mounts, I don't think it would work with that motherboard. The stock fan plus the rad would be 52mm in depth (rad+one fan on the inside of the case). Looking at either hitting the cpu power or the memory depending on how tall the ram heatsinks are.
post #302 of 1515
Hmm you make perfect sense.. I am just hoping your wrong lol. I am getting the samsung RAM that is going around the community.. it half the height of rip jaws.. so it will be fine.. just the cpu cooler and power..
post #303 of 1515
Can agree with the memory, I did try the H80 in the V4 and it just barely cleared the ram but there's a capacitor in the way, the Source 210 is slightly wider so I reckon there would be enough space for low profile memory. If you're dead set on either of those cases, I suppose you could just measure exactly where the rad and fan would sit after you get it, and then get the cooler once you're certain.

450
(yes I know stock cooling, did manage 3.2 at 45c on it.)
Between the board, standoffs and ram(about 24mm), there's about 1.5mm or so clearance between the edge of the fan and top of the ram, I would estimate in the Source 210 there would be about 3mm of clearance considering its 4.6mm wider.

You could probably manage the H80 in the 210 in the forward top 120mm mount, would lose the top two 5.25" bays tho. I didn't see any appreciable difference between the H80 and H100 on my SB rig in p/p setup using the stock paste.
Edited by PR-Imagery - 2/15/12 at 3:50pm
post #304 of 1515
I don't see much for the h80 in a haf 912. here is a simple mod I did to get a good intake position and keep my top 200mm fan. this thing destroys my 212 under any load.

IMG_1440.jpg
    
CPUMotherboardGraphicsGraphics
i5 2500k 4.5ghz asrock p67 extreme4 gen3 msi 7970 sapphire r9 280x 
RAMHard DriveCoolingKeyboard
16g gskill ripjaws intel 320 corsair h80 CM storm Quick Fire (cherry blue) 
PowerCaseMouseAudio
OCZ Fatality 1000w Bitfenix Shinobi XL R.A.T 7 Steelseries SIberia (red) 
  hide details  
Reply
    
CPUMotherboardGraphicsGraphics
i5 2500k 4.5ghz asrock p67 extreme4 gen3 msi 7970 sapphire r9 280x 
RAMHard DriveCoolingKeyboard
16g gskill ripjaws intel 320 corsair h80 CM storm Quick Fire (cherry blue) 
PowerCaseMouseAudio
OCZ Fatality 1000w Bitfenix Shinobi XL R.A.T 7 Steelseries SIberia (red) 
  hide details  
Reply
post #305 of 1515
I was just wondering if anyone new if a Cosair H100 Hydro Cooler would fit in a Overseer RX-I Full case. Maybe it would fit from inside along the top. Thinking of buying the case and the cooler but wanted to make sure it will all fit with... Any help or suggestions would be appreciated. Thanks
post #306 of 1515
Thread Starter 
Quote:
Originally Posted by mu5tang71 View Post

I was just wondering if anyone new if a Cosair H100 Hydro Cooler would fit in a Overseer RX-I Full case. Maybe it would fit from inside along the top. Thinking of buying the case and the cooler but wanted to make sure it will all fit with... Any help or suggestions would be appreciated. Thanks

Looking at this pic, it shouldn't be an issue
385

For that setup shown, there is a 240mm rad with 2 fans so similar to H100 setup. However, not sure about other component compatibility though, i.e RAM and Northbridge heatsinks getting in the way!
     
CPUMotherboardGraphicsRAM
I7 920 D0 @ 4.2Ghz Gigabyte X58A-UD3R MSI HD5970 @ 950MHz & 1250MHz Mem 12GB Corsair Vengeance 8-8-8-24 
Hard DriveOptical DriveCoolingCooling
SanDisk Xtreme 240GB Who Cares? Custom Loop Black Ice GT Stealth 360mm Rad 
CoolingCoolingCoolingCooling
Black Ice GT Stealth 240mm Rad Laing DDC-1+ Pump EK Waterblocks 10335 EK-Supreme Highflow CPU Bl... EK-FC5970  
OSMonitorKeyboardPower
Win 7 Ultimate X64 Samsung Syncmaster 2494 Steelseries 6Gv2 XFX Pro 850W Silver 88%Eff 
CaseMouse
Xigmatek Elysium Steelseries Xai 
CPUMotherboardGraphicsRAM
I7 920 D0 @ 4.2Ghz Gigabyte X58A-UD3R XFX HD 5970 @ 950MHz 12GB Corsair Vengeance 8-8-8-24 
Hard DriveOptical DriveCoolingOS
SanDisk Xtreme 240GB Who Cares? Corsair H80 Win 7 Ultimate X64 
MonitorKeyboardPowerCase
Syncmaster 2494 Steelseries 6Gv2 XFX Pro 850W Silver 88%Eff CoolerMaster CM690 
Mouse
Logitech G500 
CPUMotherboardGraphicsRAM
I7 920 D0 @ 4.2Ghz Gigabyte X58A-UD3R XFX HD 5970 @ 950MHz & 1250MHz Mem 12GB Corsair Vengeance 8-8-8-24 
Hard DriveOptical DriveCoolingOS
SanDisk Xtreme 240GB Who Cares? Custom Loop Win 7 Ultimate X64 
MonitorKeyboardPowerCase
Samsung Syncmaster 2494 Steelseries 6Gv2 XFX Pro 850W Silver 88%Eff HAF 922 
Mouse
Steelseries Xai 
  hide details  
Reply
     
CPUMotherboardGraphicsRAM
I7 920 D0 @ 4.2Ghz Gigabyte X58A-UD3R MSI HD5970 @ 950MHz & 1250MHz Mem 12GB Corsair Vengeance 8-8-8-24 
Hard DriveOptical DriveCoolingCooling
SanDisk Xtreme 240GB Who Cares? Custom Loop Black Ice GT Stealth 360mm Rad 
CoolingCoolingCoolingCooling
Black Ice GT Stealth 240mm Rad Laing DDC-1+ Pump EK Waterblocks 10335 EK-Supreme Highflow CPU Bl... EK-FC5970  
OSMonitorKeyboardPower
Win 7 Ultimate X64 Samsung Syncmaster 2494 Steelseries 6Gv2 XFX Pro 850W Silver 88%Eff 
CaseMouse
Xigmatek Elysium Steelseries Xai 
CPUMotherboardGraphicsRAM
I7 920 D0 @ 4.2Ghz Gigabyte X58A-UD3R XFX HD 5970 @ 950MHz 12GB Corsair Vengeance 8-8-8-24 
Hard DriveOptical DriveCoolingOS
SanDisk Xtreme 240GB Who Cares? Corsair H80 Win 7 Ultimate X64 
MonitorKeyboardPowerCase
Syncmaster 2494 Steelseries 6Gv2 XFX Pro 850W Silver 88%Eff CoolerMaster CM690 
Mouse
Logitech G500 
CPUMotherboardGraphicsRAM
I7 920 D0 @ 4.2Ghz Gigabyte X58A-UD3R XFX HD 5970 @ 950MHz & 1250MHz Mem 12GB Corsair Vengeance 8-8-8-24 
Hard DriveOptical DriveCoolingOS
SanDisk Xtreme 240GB Who Cares? Custom Loop Win 7 Ultimate X64 
MonitorKeyboardPowerCase
Samsung Syncmaster 2494 Steelseries 6Gv2 XFX Pro 850W Silver 88%Eff HAF 922 
Mouse
Steelseries Xai 
  hide details  
Reply
post #307 of 1515
Quote:
Originally Posted by mu5tang71 View Post

I was just wondering if anyone new if a Cosair H100 Hydro Cooler would fit in a Overseer RX-I Full case. Maybe it would fit from inside along the top. Thinking of buying the case and the cooler but wanted to make sure it will all fit with... Any help or suggestions would be appreciated. Thanks

I dont know if it has mounting holes for 120mm fans top, but as the 200mm fans are underneath the removable top, and the pic Matty linked shows it with a rad up top, you should be fine even push/pull (with pull fans "outside" the case, under the top) pic (Click to show)
index.php?ct=articles&action=file&id=12249
post #308 of 1515
I thought this information may apply here. I was able to get the H100 to fit using push pull in my 650d using the Asus P8Z68 deluxe and Gentle Typhoon AP-15 fans. Using the normal mounting holes in the top of the case there was not room for the 8pin connector to clear the lower fan. I was able to mount the H100 offcenter and further away from the mother board using holes in the grates on the top of the case. In the first one you can see where I mounted the H100. The 8pin clears pretty easily.

DSC_0011.jpg

DSC_0028.jpg

DSC_0032.jpg

DSC_0033.jpg
Edited by TahoeDust - 2/17/12 at 8:37pm
X299 Evolv'd
(13 items)
 
unRAID Server
(13 items)
 
 
CPUMotherboardGraphicsRAM
i7-7820x @ 4.8GHz Gigabyte Aorus X299 Gaming 7 EVGA 1080 ti FTW3 g.skill TridentZ RGB 3600 CL16 
Hard DriveHard DriveCoolingOS
2 x Samsung 960 EVO 500gb Raid 0 Samsung 850 EVO 1TB H115i w 4 x Noiseblocker B14 PS Push/Pull Windows 10 Pro 
MonitorKeyboardPowerCase
AOC Agon AG352UCG 3440x1440 100hz Ultra Wide Corsair K70 EVGA Supernova G2 850w Phanteks Evolv ATX Tempered Glass 
Mouse
Logitech G900 
  hide details  
Reply
X299 Evolv'd
(13 items)
 
unRAID Server
(13 items)
 
 
CPUMotherboardGraphicsRAM
i7-7820x @ 4.8GHz Gigabyte Aorus X299 Gaming 7 EVGA 1080 ti FTW3 g.skill TridentZ RGB 3600 CL16 
Hard DriveHard DriveCoolingOS
2 x Samsung 960 EVO 500gb Raid 0 Samsung 850 EVO 1TB H115i w 4 x Noiseblocker B14 PS Push/Pull Windows 10 Pro 
MonitorKeyboardPowerCase
AOC Agon AG352UCG 3440x1440 100hz Ultra Wide Corsair K70 EVGA Supernova G2 850w Phanteks Evolv ATX Tempered Glass 
Mouse
Logitech G900 
  hide details  
Reply
post #309 of 1515
You can get an H80 to fit in the Antec 300 if you flip the Rad Upside down so the tubing goes up, its a bit of a squeeze but im confident that it would fit, it looks like the rear 120mm can stack 3 and a half fans before you actually start running into the CPU socket, (on LGA 1156 anyways)
    
CPUMotherboardGraphicsRAM
Intel Core i7 3960X Extreme Edition Gigabyte GA-X79-UD3 MSI GTX 980 Gaming 4G HyperX Fury Red - 16GB DDR3 1866MHz 
RAMHard DriveHard DriveHard Drive
AMD Performance OEM - 16GB DDR3 1866MHz Sandisk Ultra II 500GB SSD Samsung 830 128GB SSD WD Caviar Black 500GB 
Hard DriveOptical DriveCoolingOS
WD Caviar Green 1TB MSI DVD Burner Corsair H100i Windows 10 Education 64Bit 
MonitorKeyboardPowerCase
Asus VE247H AZIO MGK L80 Mechanical Keyboard Corsair HX1050 NZXT Phantom 210 
MouseMouse PadAudioAudio
CM Sentinel Advance DXRacer Zero Series - White Shark Creative Sound Blaster Z Sennheiser HD 598Cs 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Intel Core i7 3960X Extreme Edition Gigabyte GA-X79-UD3 MSI GTX 980 Gaming 4G HyperX Fury Red - 16GB DDR3 1866MHz 
RAMHard DriveHard DriveHard Drive
AMD Performance OEM - 16GB DDR3 1866MHz Sandisk Ultra II 500GB SSD Samsung 830 128GB SSD WD Caviar Black 500GB 
Hard DriveOptical DriveCoolingOS
WD Caviar Green 1TB MSI DVD Burner Corsair H100i Windows 10 Education 64Bit 
MonitorKeyboardPowerCase
Asus VE247H AZIO MGK L80 Mechanical Keyboard Corsair HX1050 NZXT Phantom 210 
MouseMouse PadAudioAudio
CM Sentinel Advance DXRacer Zero Series - White Shark Creative Sound Blaster Z Sennheiser HD 598Cs 
  hide details  
Reply
post #310 of 1515
Thank you all for all your suggestions and help with the Thermaltake Overseer RX-I Computer Case and it's compatibility with the Cosair H100 Hydro Cooler. With your info and some that I found I am sure it would fit nice!! I posted a photo of the top and there is a set up for the radiator. The radiator is offset from the far side, away from the board giving me clearance from the ram and so on. So I am going to go with the push pull 4x120mm set-up from inside and still keep 2x 200mm fans on top because the radiator mounts look recessed witch should allow me to keep the top fans for some great air flow. I have the Gigabyte GA-P55M-UD2 with a 1156 socket for the i7 860 CPU. Thanks again for all your help..... I will post some pics when I get it set up......thumb.gif

111.jpg
Edited by mu5tang71 - 2/18/12 at 1:38pm
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Water Cooling
Overclock.net › Forums › Cooling › Water Cooling › H80 / H80i / H90 / H100 / H100i / H110 Case Compatibility Thread (Page 1 for full listings)