Overclock.net › Forums › Cooling › Water Cooling › H80 / H80i / H90 / H100 / H100i / H110 Case Compatibility Thread (Page 1 for full listings)
New Posts  All Forums:Forum Nav:

H80 / H80i / H90 / H100 / H100i / H110 Case Compatibility Thread (Page 1 for full listings) - Page 55

post #541 of 1515
Quote:
Originally Posted by drserk View Post

Hi
My h80i came today. i have a problem with backplate to mount back side of asus P8Z77V DELUXE motherboard. Problem is about backplate loose. i mount all screws but backplate is still loose. So i have to add washers between backplate and motherboard. Now it isnot loose anymore. is there anybody who had a problem like mine?

It's supposed to be that way because the front bracket screws pull the back bracket together. My concern is you added washers which could cause a short. You also leave the plastic on the backplate too for insulation. The idea is the bracket mounting system won't touch the mobo other than the water block itself.
post #542 of 1515
Quote:
Originally Posted by DUpgrade View Post

It's supposed to be that way because the front bracket screws pull the back bracket together. My concern is you added washers which could cause a short. You also leave the plastic on the backplate too for insulation. The idea is the bracket mounting system won't touch the mobo other than the water block itself.
Thank you!!! I finally installed the intel backplate but wasn't sure whether or not to keep the plastic on... phew

zGunBLADEz here it is
Thermaltake chaser mk-i case... it's my first build so I had a bit of a tough time with it, lol

post #543 of 1515
Hey guys are there any problems with putting the reservoir of the H80i on the side??
Odin
(20 items)
 
Tyr
(15 items)
 
 
CPUMotherboardGraphicsGraphics
Intel i7 - 3930k sabertooth x79 GTX 580 GTX 580 
RAMHard DriveHard DriveHard Drive
8GHz Patriot-S kit (2 x 4GHz) OCZ Vector SSD 2TB Seagate 2TB Seagate 
Hard DriveCoolingCoolingOS
500 GB external Seagate Antec 620  2 x Antec Case Fans, 3 x Noctua NF-F12 Fans, 3 ... Windows 7 
MonitorKeyboardPowerCase
LG Flatron W2753VC TT eSports  Antec HGC 900 Antec P280-W 
MouseMouse PadAudioAudio
CM Storm Sentinel Zero-G Shattered Horizon Edition Star Craft 2 - Heart of the Swarm Edition Logitech Z906 5.1 Surround sound  Steelseries Gaming Headphones 
  hide details  
Reply
Odin
(20 items)
 
Tyr
(15 items)
 
 
CPUMotherboardGraphicsGraphics
Intel i7 - 3930k sabertooth x79 GTX 580 GTX 580 
RAMHard DriveHard DriveHard Drive
8GHz Patriot-S kit (2 x 4GHz) OCZ Vector SSD 2TB Seagate 2TB Seagate 
Hard DriveCoolingCoolingOS
500 GB external Seagate Antec 620  2 x Antec Case Fans, 3 x Noctua NF-F12 Fans, 3 ... Windows 7 
MonitorKeyboardPowerCase
LG Flatron W2753VC TT eSports  Antec HGC 900 Antec P280-W 
MouseMouse PadAudioAudio
CM Storm Sentinel Zero-G Shattered Horizon Edition Star Craft 2 - Heart of the Swarm Edition Logitech Z906 5.1 Surround sound  Steelseries Gaming Headphones 
  hide details  
Reply
post #544 of 1515
Thanks for the helpful thread, are you going to add H110 to the list when it is released?
Pooter
(19 items)
 
  
CPUMotherboardGraphicsRAM
3570k P8Z77-v DELUXE GTX 680 Samsung 30nm 2x4GB 
Hard DriveHard DriveHard DriveOptical Drive
Crucial M4 256GB SSD Crucial M4 512GB SSD 1TB Samsung HDD Cheapo LG DVD drive 
CoolingOSMonitorMonitor
H100 Windows 7 Ultimate 64-bit BenQ 2420T Yamakasi Catleap 
KeyboardPowerCaseMouse
WASD Keyboard V1 Silverstone Strider Plus 850W Thermaltake Level 10 GT Steelseries Kana 
AudioAudioAudio
Titanium HD ATH-AD900 Swan M200MKIII 
  hide details  
Reply
Pooter
(19 items)
 
  
CPUMotherboardGraphicsRAM
3570k P8Z77-v DELUXE GTX 680 Samsung 30nm 2x4GB 
Hard DriveHard DriveHard DriveOptical Drive
Crucial M4 256GB SSD Crucial M4 512GB SSD 1TB Samsung HDD Cheapo LG DVD drive 
CoolingOSMonitorMonitor
H100 Windows 7 Ultimate 64-bit BenQ 2420T Yamakasi Catleap 
KeyboardPowerCaseMouse
WASD Keyboard V1 Silverstone Strider Plus 850W Thermaltake Level 10 GT Steelseries Kana 
AudioAudioAudio
Titanium HD ATH-AD900 Swan M200MKIII 
  hide details  
Reply
post #545 of 1515
Thread Starter 
Quote:
Originally Posted by Whiskerz View Post

Thanks for the helpful thread, are you going to add H110 to the list when it is released?

Yes I will!
     
CPUMotherboardGraphicsRAM
I7 920 D0 @ 4.2Ghz Gigabyte X58A-UD3R MSI HD5970 @ 950MHz & 1250MHz Mem 12GB Corsair Vengeance 8-8-8-24 
Hard DriveOptical DriveCoolingCooling
SanDisk Xtreme 240GB Who Cares? Custom Loop Black Ice GT Stealth 360mm Rad 
CoolingCoolingCoolingCooling
Black Ice GT Stealth 240mm Rad Laing DDC-1+ Pump EK Waterblocks 10335 EK-Supreme Highflow CPU Bl... EK-FC5970  
OSMonitorKeyboardPower
Win 7 Ultimate X64 Samsung Syncmaster 2494 Steelseries 6Gv2 XFX Pro 850W Silver 88%Eff 
CaseMouse
Xigmatek Elysium Steelseries Xai 
CPUMotherboardGraphicsRAM
I7 920 D0 @ 4.2Ghz Gigabyte X58A-UD3R XFX HD 5970 @ 950MHz 12GB Corsair Vengeance 8-8-8-24 
Hard DriveOptical DriveCoolingOS
SanDisk Xtreme 240GB Who Cares? Corsair H80 Win 7 Ultimate X64 
MonitorKeyboardPowerCase
Syncmaster 2494 Steelseries 6Gv2 XFX Pro 850W Silver 88%Eff CoolerMaster CM690 
Mouse
Logitech G500 
CPUMotherboardGraphicsRAM
I7 920 D0 @ 4.2Ghz Gigabyte X58A-UD3R XFX HD 5970 @ 950MHz & 1250MHz Mem 12GB Corsair Vengeance 8-8-8-24 
Hard DriveOptical DriveCoolingOS
SanDisk Xtreme 240GB Who Cares? Custom Loop Win 7 Ultimate X64 
MonitorKeyboardPowerCase
Samsung Syncmaster 2494 Steelseries 6Gv2 XFX Pro 850W Silver 88%Eff HAF 922 
Mouse
Steelseries Xai 
  hide details  
Reply
     
CPUMotherboardGraphicsRAM
I7 920 D0 @ 4.2Ghz Gigabyte X58A-UD3R MSI HD5970 @ 950MHz & 1250MHz Mem 12GB Corsair Vengeance 8-8-8-24 
Hard DriveOptical DriveCoolingCooling
SanDisk Xtreme 240GB Who Cares? Custom Loop Black Ice GT Stealth 360mm Rad 
CoolingCoolingCoolingCooling
Black Ice GT Stealth 240mm Rad Laing DDC-1+ Pump EK Waterblocks 10335 EK-Supreme Highflow CPU Bl... EK-FC5970  
OSMonitorKeyboardPower
Win 7 Ultimate X64 Samsung Syncmaster 2494 Steelseries 6Gv2 XFX Pro 850W Silver 88%Eff 
CaseMouse
Xigmatek Elysium Steelseries Xai 
CPUMotherboardGraphicsRAM
I7 920 D0 @ 4.2Ghz Gigabyte X58A-UD3R XFX HD 5970 @ 950MHz 12GB Corsair Vengeance 8-8-8-24 
Hard DriveOptical DriveCoolingOS
SanDisk Xtreme 240GB Who Cares? Corsair H80 Win 7 Ultimate X64 
MonitorKeyboardPowerCase
Syncmaster 2494 Steelseries 6Gv2 XFX Pro 850W Silver 88%Eff CoolerMaster CM690 
Mouse
Logitech G500 
CPUMotherboardGraphicsRAM
I7 920 D0 @ 4.2Ghz Gigabyte X58A-UD3R XFX HD 5970 @ 950MHz & 1250MHz Mem 12GB Corsair Vengeance 8-8-8-24 
Hard DriveOptical DriveCoolingOS
SanDisk Xtreme 240GB Who Cares? Custom Loop Win 7 Ultimate X64 
MonitorKeyboardPowerCase
Samsung Syncmaster 2494 Steelseries 6Gv2 XFX Pro 850W Silver 88%Eff HAF 922 
Mouse
Steelseries Xai 
  hide details  
Reply
post #546 of 1515
New member here. Long time avid builder but new to doing push pull with closed loop water coolers. A few questions....

Getting an H100i and I ordered 2 sets of SP120 Performance fans. On the Corsair 500R which I just received, I can mount 2 intake fans on the top of the case and then the radiator. My question is, will I have enough room to also mount the 2 other fans in the interior? I have observed this thread here and it shows 3 separate push pull configs for the h100i and the Corsair 500R case. I just want to know what fans were used since the SP120's are 120mm fans and I want to make sure I will have the clearance on the case. I don't have bulky RAM dimms with huge heatsinks, only these here....



Room in this regard isn't an issue so I just want to get some direct input from anyone who has done this type of setup with a 500R. Thanks in advance.
post #547 of 1515
Quote:
Originally Posted by liquidmetal14 View Post

New member here. Long time avid builder but new to doing push pull with closed loop water coolers. A few questions....

Getting an H100i and I ordered 2 sets of SP120 Performance fans. On the Corsair 500R which I just received, I can mount 2 intake fans on the top of the case and then the radiator. My question is, will I have enough room to also mount the 2 other fans in the interior? I have observed this thread here and it shows 3 separate push pull configs for the h100i and the Corsair 500R case. I just want to know what fans were used since the SP120's are 120mm fans and I want to make sure I will have the clearance on the case. I don't have bulky RAM dimms with huge heatsinks, only these here....
Warning: Spoiler! (Click to show)

Room in this regard isn't an issue so I just want to get some direct input from anyone who has done this type of setup with a 500R. Thanks in advance.

Shouldn't be an issue touching your ram. Keep in mind the H100i rad and fans are 50mm (about 2 inches), so just add another 25mm (size of a fan, about 3 inches total) to see if you have enough clearance to do push/pull. I think you'll have enough room because with the 500R it has the area above the 'inside' for you to mount your pull fans. Should have plenty of room to mount the rad and internal push fans I would think.
post #548 of 1515
Quote:
Originally Posted by DUpgrade View Post

Shouldn't be an issue touching your ram. Keep in mind the H100i rad and fans are 50mm (about 2 inches), so just add another 25mm (size of a fan, about 3 inches total) to see if you have enough clearance to do push/pull. I think you'll have enough room because with the 500R it has the area above the 'inside' for you to mount your pull fans. Should have plenty of room to mount the rad and internal push fans I would think.

Thanks, I just sort of needed that kind of confirmation. I don't have the motherboard in yet as I'm waiting for the money to come along early next month but I have some things I'm trying to fit in the case prior to getting the rest of the parts. Sounds like the MB won't really go too high up into the case and nothing will stick out too much but I wanted to have someone say it. I will probably check back once it's all said and done. Thanks.
post #549 of 1515
Thread Starter 
Quote:
Originally Posted by liquidmetal14 View Post

New member here. Long time avid builder but new to doing push pull with closed loop water coolers. A few questions....

Getting an H100i and I ordered 2 sets of SP120 Performance fans. On the Corsair 500R which I just received, I can mount 2 intake fans on the top of the case and then the radiator. My question is, will I have enough room to also mount the 2 other fans in the interior? I have observed this thread here and it shows 3 separate push pull configs for the h100i and the Corsair 500R case. I just want to know what fans were used since the SP120's are 120mm fans and I want to make sure I will have the clearance on the case. I don't have bulky RAM dimms with huge heatsinks, only these here....

Room in this regard isn't an issue so I just want to get some direct input from anyone who has done this type of setup with a 500R. Thanks in advance.

The concern in this specific case is not the RAM but the VRM heatsinks on the motherboard...



Normally run horizontally above the CPU socket and/or vertically to the left of the socket is all your power delivery and voltage regulation, dependant on the motherboard it can be quite large. Higher end boards that are designed specifically with OC'ing in mind often have larger heatsinks,
     
CPUMotherboardGraphicsRAM
I7 920 D0 @ 4.2Ghz Gigabyte X58A-UD3R MSI HD5970 @ 950MHz & 1250MHz Mem 12GB Corsair Vengeance 8-8-8-24 
Hard DriveOptical DriveCoolingCooling
SanDisk Xtreme 240GB Who Cares? Custom Loop Black Ice GT Stealth 360mm Rad 
CoolingCoolingCoolingCooling
Black Ice GT Stealth 240mm Rad Laing DDC-1+ Pump EK Waterblocks 10335 EK-Supreme Highflow CPU Bl... EK-FC5970  
OSMonitorKeyboardPower
Win 7 Ultimate X64 Samsung Syncmaster 2494 Steelseries 6Gv2 XFX Pro 850W Silver 88%Eff 
CaseMouse
Xigmatek Elysium Steelseries Xai 
CPUMotherboardGraphicsRAM
I7 920 D0 @ 4.2Ghz Gigabyte X58A-UD3R XFX HD 5970 @ 950MHz 12GB Corsair Vengeance 8-8-8-24 
Hard DriveOptical DriveCoolingOS
SanDisk Xtreme 240GB Who Cares? Corsair H80 Win 7 Ultimate X64 
MonitorKeyboardPowerCase
Syncmaster 2494 Steelseries 6Gv2 XFX Pro 850W Silver 88%Eff CoolerMaster CM690 
Mouse
Logitech G500 
CPUMotherboardGraphicsRAM
I7 920 D0 @ 4.2Ghz Gigabyte X58A-UD3R XFX HD 5970 @ 950MHz & 1250MHz Mem 12GB Corsair Vengeance 8-8-8-24 
Hard DriveOptical DriveCoolingOS
SanDisk Xtreme 240GB Who Cares? Custom Loop Win 7 Ultimate X64 
MonitorKeyboardPowerCase
Samsung Syncmaster 2494 Steelseries 6Gv2 XFX Pro 850W Silver 88%Eff HAF 922 
Mouse
Steelseries Xai 
  hide details  
Reply
     
CPUMotherboardGraphicsRAM
I7 920 D0 @ 4.2Ghz Gigabyte X58A-UD3R MSI HD5970 @ 950MHz & 1250MHz Mem 12GB Corsair Vengeance 8-8-8-24 
Hard DriveOptical DriveCoolingCooling
SanDisk Xtreme 240GB Who Cares? Custom Loop Black Ice GT Stealth 360mm Rad 
CoolingCoolingCoolingCooling
Black Ice GT Stealth 240mm Rad Laing DDC-1+ Pump EK Waterblocks 10335 EK-Supreme Highflow CPU Bl... EK-FC5970  
OSMonitorKeyboardPower
Win 7 Ultimate X64 Samsung Syncmaster 2494 Steelseries 6Gv2 XFX Pro 850W Silver 88%Eff 
CaseMouse
Xigmatek Elysium Steelseries Xai 
CPUMotherboardGraphicsRAM
I7 920 D0 @ 4.2Ghz Gigabyte X58A-UD3R XFX HD 5970 @ 950MHz 12GB Corsair Vengeance 8-8-8-24 
Hard DriveOptical DriveCoolingOS
SanDisk Xtreme 240GB Who Cares? Corsair H80 Win 7 Ultimate X64 
MonitorKeyboardPowerCase
Syncmaster 2494 Steelseries 6Gv2 XFX Pro 850W Silver 88%Eff CoolerMaster CM690 
Mouse
Logitech G500 
CPUMotherboardGraphicsRAM
I7 920 D0 @ 4.2Ghz Gigabyte X58A-UD3R XFX HD 5970 @ 950MHz & 1250MHz Mem 12GB Corsair Vengeance 8-8-8-24 
Hard DriveOptical DriveCoolingOS
SanDisk Xtreme 240GB Who Cares? Custom Loop Win 7 Ultimate X64 
MonitorKeyboardPowerCase
Samsung Syncmaster 2494 Steelseries 6Gv2 XFX Pro 850W Silver 88%Eff HAF 922 
Mouse
Steelseries Xai 
  hide details  
Reply
post #550 of 1515
The h100i does in fact fit in the front of the define R4. http://www.overclock.net/t/838683/fractal-design-case-club/5840#post_19145654
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Water Cooling
Overclock.net › Forums › Cooling › Water Cooling › H80 / H80i / H90 / H100 / H100i / H110 Case Compatibility Thread (Page 1 for full listings)