Overclock.net › Forums › Cooling › Water Cooling › H80 / H80i / H90 / H100 / H100i / H110 Case Compatibility Thread (Page 1 for full listings)
New Posts  All Forums:Forum Nav:

H80 / H80i / H90 / H100 / H100i / H110 Case Compatibility Thread (Page 1 for full listings) - Page 68

post #671 of 1515
Corsair H100i fitted in in the upper ceiling of a Zalman Z11 plus, with fans in push on the top.
Little mod was required as drilling new holes and replace the top fins coverage .
It works at the best in conjunction with the airflow provided by a Corsair AF140 fan mounted in the upper front 5.25 bay area and the rear AF120 fan as exhaust.













post #672 of 1515
Corsair H110 fitted to carbide 300r, minor modding of top grill, either the fans or the rad have to sit on top of the grill.

here is a link : http://www.overclock.net/t/1307044/official-corsair-300r-owners-fan-club-and-guide-post-build-logs-and-mods/120#post_19597739

a radiator grill on top would be even nicer, i have to look for one.
post #673 of 1515
Quote:
Originally Posted by jotavip View Post

Hi. I was able to fit the H100i in my CM690 Nvidia Edition standard case. The only thing is that fixing the radiator on the top was a bit tricky.

I was only able to fix two screws of the radiator, my motherboard is an Asus Rampage Extreme II, and it have a heatsink sitting in some capacitors above the CPU slot. This heatsink blocked the radiator to be placed in the correct position. But even with only two screws the radiator was firmily attached.

But I think the temps are high. My CPU is an i7 920. I used Real Temp to measure it

At 2.6 GHz: 40 on idle and 65 load.
At 3.2 GHz: 50 idle and 75 load.

I searched around, and the temps should be around 10 ~ 15 degrees lower. Anyone has suggestions to low the temps?

below is a picture of my installation:

*



Good evening from Greece,

Well, recently i upgraded my first PC build, going from s1156 and Core i5 760 to s2011 and Core i7 3930K, keeping some stuff from the first build.
So, my current build consists of:

Intel Core i7-3930K
Gigabyte GA-X79-UD5
Coolermaster V8
G.Skill Ares 32GB @ 1866MHz (10-11-10-30)
Gigabyte GTX460-768I
OCZ Vertex 2 SSD 60GB
Western Digital 640GB CaviarBlack SATA3
Coolermaster Silent Pro M600
Coolermaster CM 690 Pure Black Edition


I was wondering wether the H100i would fit in my case, considering Gigabyte's UD5 motherboard layout.
I really want to go with water cooling. Right now, with V8, core voltage from 0.876V to 1.260V max (depends on load) and cpu speed @ 3.8GHz idle temperature is 30-35 degrees celsius.
Temperature under intel burn test (full load) is 68-73 degrees celsius.

Here's a some pics of my build.










post #674 of 1515
I was wondering if the H100i will fit on very top (just under the plastic, above the "real" case) of a Nzxt Phantom or a Phantom 410
post #675 of 1515
Quote:
Originally Posted by cplifj View Post

Corsair H110 fitted to carbide 300r, minor modding of top grill, either the fans or the rad have to sit on top of the grill.

here is a link : http://www.overclock.net/t/1307044/official-corsair-300r-owners-fan-club-and-guide-post-build-logs-and-mods/120#post_19597739

a radiator grill on top would be even nicer, i have to look for one.

You should look for some of the external shrouds used in this build:

http://www.overclock.net/t/907643/corsair-obsidian-650d-mid-tower/750#post_14943357

Put your fans up top under the shrouds and your rad inside the case. It should look pretty sweet on your case.
Nukeyork
(24 items)
 
  
CPUMotherboardGraphicsGraphics
Intel Core i7 4770k ASUS Sabertooth Z87 MSI Radeon RX480 Gaming X 8GB MSI Radeon RX480 Gaming X 8GB 
RAMHard DriveHard DriveHard Drive
16G Kingston 1600MHz Corsair Force Series SSD 180GB Crucial MX300 SSD 525GB Western Digital WD10EALS 1TB 
Optical DriveCoolingOSMonitor
ASUS BW-12B1ST Blu-ray RW Thermaltake Water 3.0 Ultimate Windows 10 64 pro LG 34UM65-P 
KeyboardPowerCaseMouse
Hcman Zhuque Teamwolf Mechanical Corsair AX750 Corsair 760T Steel Series Sensei Wireless Gaming Mouse 
Mouse PadAudioOtherOther
Steel Series 4HD Pro On Board Thermaltake X 5G Superspeed USB 3.0 Hard Drive ... Logitech Driving Force GT Steering Wheel 
OtherOtherOtherOther
Thrustmaster T.Flight Hotas X Joystick NZXT Hue LED Controller Razer Orbweaver Chroma RGB Mechanical Gaming Co... Ergotron LX Desk Mount LCD Arm 
  hide details  
Reply
Nukeyork
(24 items)
 
  
CPUMotherboardGraphicsGraphics
Intel Core i7 4770k ASUS Sabertooth Z87 MSI Radeon RX480 Gaming X 8GB MSI Radeon RX480 Gaming X 8GB 
RAMHard DriveHard DriveHard Drive
16G Kingston 1600MHz Corsair Force Series SSD 180GB Crucial MX300 SSD 525GB Western Digital WD10EALS 1TB 
Optical DriveCoolingOSMonitor
ASUS BW-12B1ST Blu-ray RW Thermaltake Water 3.0 Ultimate Windows 10 64 pro LG 34UM65-P 
KeyboardPowerCaseMouse
Hcman Zhuque Teamwolf Mechanical Corsair AX750 Corsair 760T Steel Series Sensei Wireless Gaming Mouse 
Mouse PadAudioOtherOther
Steel Series 4HD Pro On Board Thermaltake X 5G Superspeed USB 3.0 Hard Drive ... Logitech Driving Force GT Steering Wheel 
OtherOtherOtherOther
Thrustmaster T.Flight Hotas X Joystick NZXT Hue LED Controller Razer Orbweaver Chroma RGB Mechanical Gaming Co... Ergotron LX Desk Mount LCD Arm 
  hide details  
Reply
post #676 of 1515
Hi, I have a 9c diff between hottest and coolest core. Is this normal for the H100i on a 3930k?
The block won't fit on any tighter.
X79-GCN
(22 items)
 
  
CPUMotherboardGraphicsRAM
Intel 3930K 4.5GHz HT GIGABYTE GA-X79-UP4 AMD R9-290X GEil Evo Potenza DDR3 2400MHz CL10 (4x4GB) 
Hard DriveCoolingCoolingCooling
Samsung 840 Pro 120GB EK Supremacy (CPU) NF F12's P/P (360 Rad)  NF A14's (420 Rad)  
CoolingCoolingCoolingCooling
XSPC Chrome Compression Fittings EK RES X3 150 Primochill PremoFlex Advanced LRT Clear 1/2 ID EK-FC (R9 290X) 
CoolingCoolingCoolingOS
EK D5 Vario Top-X  Phobya G-Changer V2 360mm Phobya G-Changer V2 420mm Win 10 x64 Pro 
MonitorKeyboardPowerCase
BenQ XR3501 35" Curved Corsair Vengeance K90 Seasonic X-1250 Gold (v2) Corsair 900D 
MouseAudio
Logitech G400s Senn HD 598 
  hide details  
Reply
X79-GCN
(22 items)
 
  
CPUMotherboardGraphicsRAM
Intel 3930K 4.5GHz HT GIGABYTE GA-X79-UP4 AMD R9-290X GEil Evo Potenza DDR3 2400MHz CL10 (4x4GB) 
Hard DriveCoolingCoolingCooling
Samsung 840 Pro 120GB EK Supremacy (CPU) NF F12's P/P (360 Rad)  NF A14's (420 Rad)  
CoolingCoolingCoolingCooling
XSPC Chrome Compression Fittings EK RES X3 150 Primochill PremoFlex Advanced LRT Clear 1/2 ID EK-FC (R9 290X) 
CoolingCoolingCoolingOS
EK D5 Vario Top-X  Phobya G-Changer V2 360mm Phobya G-Changer V2 420mm Win 10 x64 Pro 
MonitorKeyboardPowerCase
BenQ XR3501 35" Curved Corsair Vengeance K90 Seasonic X-1250 Gold (v2) Corsair 900D 
MouseAudio
Logitech G400s Senn HD 598 
  hide details  
Reply
post #677 of 1515
Quote:
Originally Posted by BradleyW View Post

Hi, I have a 9c diff between hottest and coolest core. Is this normal for the H100i on a 3930k?
The block won't fit on any tighter.

Only if it is for your idle temps. Seems like a lot, but I think you'll be OK. I usually only see a 6c-7c difference in idle, BUT what really counts for me is at my Load temps the core temps really tighten up and typically I'll only see a 2c difference between all cores under load. So check the spread under a full load such as P95.

Edit: If there is still a 7c-9c difference under load then I'd try a remount to eliminate uneven pressure due to over tightening/under tightening of one or more screws.
Edited by TomcatV - 3/28/13 at 11:25am
 
Too Easy
(17 items)
 
 
CPUMotherboardGraphicsGraphics
6700K 47/44GHz@1.296v or 48/45@1.360v Adaptive ... Z170 ASUS HERO VIII LGA 1151 (Bios 2202) Evga GTX 1080 SC "SOLD $525" no bios editor! Gigabyte G1 GTX 980Ti 1519/8002 24/7 Bios modded! 
RAMHard DriveHard DriveCooling
TridentZ 3600 15-15-15-36-1T [F4-3600C16D-16GTZ ] Samsung Evo SSD 500GB (boot) Crucial MX300 SSD 1TB (storage) Kraken X61  
OSMonitorMonitorKeyboard
Win10 64bit (sucks) Overlord 27" "Glossy" 1440p@120Hz QNIX QX2710 "Glossy" 1440p@120Hz+  Corsair K65 RGB Cherry Red 
PowerCaseMouseMouse Pad
EVGA SuperNOVA 1200 P2 Platinum NZXT H440 (Hate it!) Logitech G502 / Razer Deathader Rocketfish "Speed" 
Audio
Sound Blaster Z w/ Logitech Z680 5.1 Speakers  
CPUMotherboardGraphicsRAM
2500K@4.6 24/7 ASRock Z68 Ext4 Gen3 (bios 1.10) Gigabyte G1 GTX 980Ti 1532/8002 24/7 Bios modded GSkill F3-17000CL11D-8GBXL 1.54v 
Hard DriveHard DriveOptical DriveCooling
Samsung 850 Evo 500GB 1T Samsung F3-storage Asus 24x H100 top exhaust (push/pull kinda?) 
OSMonitorMonitorKeyboard
Win7-64bit SP1  QNIX QX2710 "Glossy" 1440p@120Hz++ (1st gen L02... Overlord 27" Glossy 1440p@120Hz Corsair K65 RGB Cherry Red 
PowerCaseMouseMouse Pad
Corsair HX850w Haf 922 (modded) Logitech G502 Rocketfish Speed 
Audio
Sound Blaster Z w/ Logitech Z680 5.1 Speakers  
  hide details  
Reply
 
Too Easy
(17 items)
 
 
CPUMotherboardGraphicsGraphics
6700K 47/44GHz@1.296v or 48/45@1.360v Adaptive ... Z170 ASUS HERO VIII LGA 1151 (Bios 2202) Evga GTX 1080 SC "SOLD $525" no bios editor! Gigabyte G1 GTX 980Ti 1519/8002 24/7 Bios modded! 
RAMHard DriveHard DriveCooling
TridentZ 3600 15-15-15-36-1T [F4-3600C16D-16GTZ ] Samsung Evo SSD 500GB (boot) Crucial MX300 SSD 1TB (storage) Kraken X61  
OSMonitorMonitorKeyboard
Win10 64bit (sucks) Overlord 27" "Glossy" 1440p@120Hz QNIX QX2710 "Glossy" 1440p@120Hz+  Corsair K65 RGB Cherry Red 
PowerCaseMouseMouse Pad
EVGA SuperNOVA 1200 P2 Platinum NZXT H440 (Hate it!) Logitech G502 / Razer Deathader Rocketfish "Speed" 
Audio
Sound Blaster Z w/ Logitech Z680 5.1 Speakers  
CPUMotherboardGraphicsRAM
2500K@4.6 24/7 ASRock Z68 Ext4 Gen3 (bios 1.10) Gigabyte G1 GTX 980Ti 1532/8002 24/7 Bios modded GSkill F3-17000CL11D-8GBXL 1.54v 
Hard DriveHard DriveOptical DriveCooling
Samsung 850 Evo 500GB 1T Samsung F3-storage Asus 24x H100 top exhaust (push/pull kinda?) 
OSMonitorMonitorKeyboard
Win7-64bit SP1  QNIX QX2710 "Glossy" 1440p@120Hz++ (1st gen L02... Overlord 27" Glossy 1440p@120Hz Corsair K65 RGB Cherry Red 
PowerCaseMouseMouse Pad
Corsair HX850w Haf 922 (modded) Logitech G502 Rocketfish Speed 
Audio
Sound Blaster Z w/ Logitech Z680 5.1 Speakers  
  hide details  
Reply
post #678 of 1515
Quote:
Originally Posted by TomcatV View Post

Only if it is for your idle temps. Seems like a lot, but I think you'll be OK. I usually only see a 6c-7c difference in idle, BUT what really counts for me is at my Load temps the core temps really tighten up and typically I'll only see a 2c difference between all cores under load. So check the spread under a full load such as P95.

Edit: If there is still a 7c-9c difference under load then I'd try a remount to eliminate uneven pressure due to over tightening/under tightening of one or more screws.

Same story at full load. Then again, I have 2 extra cores.
If I re-seat, I will have to use thermal-right chill factor III. Is this as good as what Corsair use on the H100i?
Thanks mate.
X79-GCN
(22 items)
 
  
CPUMotherboardGraphicsRAM
Intel 3930K 4.5GHz HT GIGABYTE GA-X79-UP4 AMD R9-290X GEil Evo Potenza DDR3 2400MHz CL10 (4x4GB) 
Hard DriveCoolingCoolingCooling
Samsung 840 Pro 120GB EK Supremacy (CPU) NF F12's P/P (360 Rad)  NF A14's (420 Rad)  
CoolingCoolingCoolingCooling
XSPC Chrome Compression Fittings EK RES X3 150 Primochill PremoFlex Advanced LRT Clear 1/2 ID EK-FC (R9 290X) 
CoolingCoolingCoolingOS
EK D5 Vario Top-X  Phobya G-Changer V2 360mm Phobya G-Changer V2 420mm Win 10 x64 Pro 
MonitorKeyboardPowerCase
BenQ XR3501 35" Curved Corsair Vengeance K90 Seasonic X-1250 Gold (v2) Corsair 900D 
MouseAudio
Logitech G400s Senn HD 598 
  hide details  
Reply
X79-GCN
(22 items)
 
  
CPUMotherboardGraphicsRAM
Intel 3930K 4.5GHz HT GIGABYTE GA-X79-UP4 AMD R9-290X GEil Evo Potenza DDR3 2400MHz CL10 (4x4GB) 
Hard DriveCoolingCoolingCooling
Samsung 840 Pro 120GB EK Supremacy (CPU) NF F12's P/P (360 Rad)  NF A14's (420 Rad)  
CoolingCoolingCoolingCooling
XSPC Chrome Compression Fittings EK RES X3 150 Primochill PremoFlex Advanced LRT Clear 1/2 ID EK-FC (R9 290X) 
CoolingCoolingCoolingOS
EK D5 Vario Top-X  Phobya G-Changer V2 360mm Phobya G-Changer V2 420mm Win 10 x64 Pro 
MonitorKeyboardPowerCase
BenQ XR3501 35" Curved Corsair Vengeance K90 Seasonic X-1250 Gold (v2) Corsair 900D 
MouseAudio
Logitech G400s Senn HD 598 
  hide details  
Reply
post #679 of 1515
Quote:
Originally Posted by Tyr03 View Post

I was wondering if the H100i will fit on very top (just under the plastic, above the "real" case) of a Nzxt Phantom or a Phantom 410


Yes heres a picture. Use the brackets the Nzxt Phantom came with!
photo.JPG 2730k .JPG file
Queso Fresco
(15 items)
 
  
CPUMotherboardGraphicsRAM
Ryzen 5 1600 MSI B350 Bazooka ASUS Turbo GTX 1060  T-Force DDR4 3000 16gb 
Hard DriveHard DriveCoolingOS
Samsung 840 250gb Intel 320 160gb SilverStone Heligon HE01 Windows 10 
MonitorKeyboardPowerCase
Achieva Shimian  Monoprice MX Black SeaSonic X-750 Corsair 350D 
Mouse
Logitech G403 
  hide details  
Reply
Queso Fresco
(15 items)
 
  
CPUMotherboardGraphicsRAM
Ryzen 5 1600 MSI B350 Bazooka ASUS Turbo GTX 1060  T-Force DDR4 3000 16gb 
Hard DriveHard DriveCoolingOS
Samsung 840 250gb Intel 320 160gb SilverStone Heligon HE01 Windows 10 
MonitorKeyboardPowerCase
Achieva Shimian  Monoprice MX Black SeaSonic X-750 Corsair 350D 
Mouse
Logitech G403 
  hide details  
Reply
post #680 of 1515
Hi!

I currently have the Fractal Design R3 case and a Hyper 212+ as cooler. I want to upgrade to watercooling and was looking into either the H100i or H110. I have two questions:

1- Can I mount the H110 radiator on top of my case on the outside? ie will the screw holes line-up?

2-If i do mount it outside, how do i disconnect the tubes from the radiator so I can pass them through the watercooling holes at the back of the case? What are the warranty implications of doing this?

Thanks
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Water Cooling
Overclock.net › Forums › Cooling › Water Cooling › H80 / H80i / H90 / H100 / H100i / H110 Case Compatibility Thread (Page 1 for full listings)