Overclock.net › Forums › Cooling › Water Cooling › H80 / H80i / H90 / H100 / H100i / H110 Case Compatibility Thread (Page 1 for full listings)
New Posts  All Forums:Forum Nav:

H80 / H80i / H90 / H100 / H100i / H110 Case Compatibility Thread (Page 1 for full listings) - Page 78

post #771 of 1515
Quote:
Originally Posted by Mergatroid View Post

^ I suppose if you're using fans that don't perform as well as the stock fans, then you could be right. Corsair tested the H100 in the lab with the stock fans and they got no difference when adding a second set. Of course, the stock H100 fans performed better than the stock H100i fans as well. I suppose it could also depend on the airflow dynamics of your case since Corsair tested it in a lab.

However, it seems strange to replace the stock fans like that. If people don't replace them with better performing fans, then they must be doing it to reduce the noise. Then they add a second set of fans, increasing the noise again. Go figure.

Even with all this, I have never seen documented data with screen shots and all, showing such a large difference on an H100 by adding a second set of fans with no other changes.
Quote:
Originally Posted by Abandoned View Post

He did mention that it depends on the case and system configuration. With my system I did not see a big difference. They only noticeable difference was the noise.

Couldn't have said it better thumb.gif ... I have personally experienced this, AND heard it echoed time and time again over in the Corsair Hydro Thread.

@Bradley ... I'm a big "Fan" wink.gif of the Noctua NF F-12's for their Noise to performance ratio but the price/looks rolleyes.gif Anyway your push/pull temp improvement is impressive and I look forward to your screenies/pics when your rig is back up, demonstrating how you engineered the exception to the rule biggrin.gif
Quote:
Originally Posted by BradleyW View Post

Speaking of the H100i, how much better is the eisberg 240L? Sorry for off topic here.

Definitely off topic, you need to come over to the Hydro Thread more often wink.gif ... BUT The Eisberg 240 outperforms the H100i with IB3770k OC 4.6GHz/1.3v by appx 5c-6c producing about the same noise level as the H100i in "Performance" mode, 2yr vs 5yr warranties ... AND @ $180 I'D TAKE THE H220 ($140) anyday over the Eisberg thumb.gif
Quote:
Originally Posted by BradleyW View Post

Well, I run from 2 sp120's to 4 sp120's and had no luck. Repeated test with NF F12's and there you have it, 5c difference between 2 and 4 NF F12's.

Well not exactly the testing parameters you promised ... we'll just have to take you at your "word" I guess redface.gif
Edited by TomcatV - 5/10/13 at 11:40am
 
Too Easy
(17 items)
 
 
CPUMotherboardGraphicsGraphics
6700K 47/44GHz@1.296v or 48/45@1.360v Adaptive ... Z170 ASUS HERO VIII LGA 1151 (Bios 2202) Evga GTX 1080 SC "SOLD $525" no bios editor! Gigabyte G1 GTX 980Ti 1519/8002 24/7 Bios modded! 
RAMHard DriveHard DriveCooling
TridentZ 3600 15-15-15-36-1T [F4-3600C16D-16GTZ ] Samsung Evo SSD 500GB (boot) Crucial MX300 SSD 1TB (storage) Kraken X61  
OSMonitorMonitorKeyboard
Win10 64bit (sucks) Overlord 27" "Glossy" 1440p@120Hz QNIX QX2710 "Glossy" 1440p@120Hz+  Corsair K65 RGB Cherry Red 
PowerCaseMouseMouse Pad
EVGA SuperNOVA 1200 P2 Platinum NZXT H440 (Hate it!) Logitech G502 / Razer Deathader Rocketfish "Speed" 
Audio
Sound Blaster Z w/ Logitech Z680 5.1 Speakers  
CPUMotherboardGraphicsRAM
2500K@4.6 24/7 ASRock Z68 Ext4 Gen3 (bios 1.10) Gigabyte G1 GTX 980Ti 1532/8002 24/7 Bios modded GSkill F3-17000CL11D-8GBXL 1.54v 
Hard DriveHard DriveOptical DriveCooling
Samsung 850 Evo 500GB 1T Samsung F3-storage Asus 24x H100 top exhaust (push/pull kinda?) 
OSMonitorMonitorKeyboard
Win7-64bit SP1  QNIX QX2710 "Glossy" 1440p@120Hz++ (1st gen L02... Overlord 27" Glossy 1440p@120Hz Corsair K65 RGB Cherry Red 
PowerCaseMouseMouse Pad
Corsair HX850w Haf 922 (modded) Logitech G502 Rocketfish Speed 
Audio
Sound Blaster Z w/ Logitech Z680 5.1 Speakers  
  hide details  
Reply
 
Too Easy
(17 items)
 
 
CPUMotherboardGraphicsGraphics
6700K 47/44GHz@1.296v or 48/45@1.360v Adaptive ... Z170 ASUS HERO VIII LGA 1151 (Bios 2202) Evga GTX 1080 SC "SOLD $525" no bios editor! Gigabyte G1 GTX 980Ti 1519/8002 24/7 Bios modded! 
RAMHard DriveHard DriveCooling
TridentZ 3600 15-15-15-36-1T [F4-3600C16D-16GTZ ] Samsung Evo SSD 500GB (boot) Crucial MX300 SSD 1TB (storage) Kraken X61  
OSMonitorMonitorKeyboard
Win10 64bit (sucks) Overlord 27" "Glossy" 1440p@120Hz QNIX QX2710 "Glossy" 1440p@120Hz+  Corsair K65 RGB Cherry Red 
PowerCaseMouseMouse Pad
EVGA SuperNOVA 1200 P2 Platinum NZXT H440 (Hate it!) Logitech G502 / Razer Deathader Rocketfish "Speed" 
Audio
Sound Blaster Z w/ Logitech Z680 5.1 Speakers  
CPUMotherboardGraphicsRAM
2500K@4.6 24/7 ASRock Z68 Ext4 Gen3 (bios 1.10) Gigabyte G1 GTX 980Ti 1532/8002 24/7 Bios modded GSkill F3-17000CL11D-8GBXL 1.54v 
Hard DriveHard DriveOptical DriveCooling
Samsung 850 Evo 500GB 1T Samsung F3-storage Asus 24x H100 top exhaust (push/pull kinda?) 
OSMonitorMonitorKeyboard
Win7-64bit SP1  QNIX QX2710 "Glossy" 1440p@120Hz++ (1st gen L02... Overlord 27" Glossy 1440p@120Hz Corsair K65 RGB Cherry Red 
PowerCaseMouseMouse Pad
Corsair HX850w Haf 922 (modded) Logitech G502 Rocketfish Speed 
Audio
Sound Blaster Z w/ Logitech Z680 5.1 Speakers  
  hide details  
Reply
post #772 of 1515
Quote:
Originally Posted by TomcatV View Post

Couldn't have said it better thumb.gif ... I have personally experienced this, AND heard it echoed time and time again over in the Corsair Hydro Thread.

@Bradley ... I'm a big "Fan" wink.gif of the Noctua NF F-12's for their Noise to performance ratio but the price/looks rolleyes.gif Anyway your push/pull temp improvement is impressive and I look forward to your screenies/pics when your rig is back up, demonstrating how you engineered the exception to the rule biggrin.gif

Well, I run from 2 sp120's to 4 sp120's and had no luck. Repeated test with NF F12's and there you have it, 5c difference between 2 and 4 NF F12's.
X79-GCN
(22 items)
 
  
CPUMotherboardGraphicsRAM
Intel 3930K 4.5GHz HT GIGABYTE GA-X79-UP4 AMD R9-290X GEil Evo Potenza DDR3 2400MHz CL10 (4x4GB) 
Hard DriveCoolingCoolingCooling
Samsung 840 Pro 120GB EK Supremacy (CPU) NF F12's P/P (360 Rad)  NF A14's (420 Rad)  
CoolingCoolingCoolingCooling
XSPC Chrome Compression Fittings EK RES X3 150 Primochill PremoFlex Advanced LRT Clear 1/2 ID EK-FC (R9 290X) 
CoolingCoolingCoolingOS
EK D5 Vario Top-X  Phobya G-Changer V2 360mm Phobya G-Changer V2 420mm Win 10 x64 Pro 
MonitorKeyboardPowerCase
BenQ XR3501 35" Curved Corsair Vengeance K90 Seasonic X-1250 Gold (v2) Corsair 900D 
MouseAudio
Logitech G400s Senn HD 598 
  hide details  
Reply
X79-GCN
(22 items)
 
  
CPUMotherboardGraphicsRAM
Intel 3930K 4.5GHz HT GIGABYTE GA-X79-UP4 AMD R9-290X GEil Evo Potenza DDR3 2400MHz CL10 (4x4GB) 
Hard DriveCoolingCoolingCooling
Samsung 840 Pro 120GB EK Supremacy (CPU) NF F12's P/P (360 Rad)  NF A14's (420 Rad)  
CoolingCoolingCoolingCooling
XSPC Chrome Compression Fittings EK RES X3 150 Primochill PremoFlex Advanced LRT Clear 1/2 ID EK-FC (R9 290X) 
CoolingCoolingCoolingOS
EK D5 Vario Top-X  Phobya G-Changer V2 360mm Phobya G-Changer V2 420mm Win 10 x64 Pro 
MonitorKeyboardPowerCase
BenQ XR3501 35" Curved Corsair Vengeance K90 Seasonic X-1250 Gold (v2) Corsair 900D 
MouseAudio
Logitech G400s Senn HD 598 
  hide details  
Reply
post #773 of 1515
Fits in push/pull in the InWin Dragon Rider, you just need a slightly longer screw. Don't know if that counts as modding. It fits in push/pull all inside the case though with normal sized fans. No real restrictions (unless your ram has the worlds largest heatsink)
Black Jarvis V1.9
(21 items)
 
Mazdaspeed6
(18 items)
 
 
  hide details  
Reply
Black Jarvis V1.9
(21 items)
 
Mazdaspeed6
(18 items)
 
 
  hide details  
Reply
post #774 of 1515
Folks, I think I am set on modding my old Lian-Li case to accept the Corsair Hydro H80i so had a measure up today.

I think I have just about enough room for it, do you think it will be ok in there?

I have an extra 25mm on the top and bottom which from what I can tell is enough for the radiator.


Edited by D-an-W - 5/11/13 at 1:05pm
Lian-Dan-Li
(0 items)
  
Reply
Lian-Dan-Li
(0 items)
  
Reply
post #775 of 1515
The inwin dragon rider will fit a h100 with 120x25 and a set of 120x38,s on my set up in push pull.
But I modded it now to add a thicker rad with a 25mm shroud.
    
CPUMotherboardGraphicsRAM
8350/4.8 Asus Crosshair v formula z Sapphire Vapor x 7950 Crucial BalisticTactical tracer-1866/9-9-9-24 O... 
Hard DriveHard DriveOptical DriveCooling
Crucial m4 128gb Western Digital Caviar Black 2 TB SATA III 7200... Asus Burner Corsair H100  
OSMonitorKeyboardPower
windows 7 ultimate 64 bit Asus ve258q Logitech G19 seasonic series x-1250  
CaseMouseMouse PadAudio
InWin Dragon Rider Logitech G 500 thermaltake lighted logitech 5.1 506 
Other
SB 3D recon sound card 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
8350/4.8 Asus Crosshair v formula z Sapphire Vapor x 7950 Crucial BalisticTactical tracer-1866/9-9-9-24 O... 
Hard DriveHard DriveOptical DriveCooling
Crucial m4 128gb Western Digital Caviar Black 2 TB SATA III 7200... Asus Burner Corsair H100  
OSMonitorKeyboardPower
windows 7 ultimate 64 bit Asus ve258q Logitech G19 seasonic series x-1250  
CaseMouseMouse PadAudio
InWin Dragon Rider Logitech G 500 thermaltake lighted logitech 5.1 506 
Other
SB 3D recon sound card 
  hide details  
Reply
post #776 of 1515
From the pic you are showing, I would say tight, but the h80 should fit .
    
CPUMotherboardGraphicsRAM
8350/4.8 Asus Crosshair v formula z Sapphire Vapor x 7950 Crucial BalisticTactical tracer-1866/9-9-9-24 O... 
Hard DriveHard DriveOptical DriveCooling
Crucial m4 128gb Western Digital Caviar Black 2 TB SATA III 7200... Asus Burner Corsair H100  
OSMonitorKeyboardPower
windows 7 ultimate 64 bit Asus ve258q Logitech G19 seasonic series x-1250  
CaseMouseMouse PadAudio
InWin Dragon Rider Logitech G 500 thermaltake lighted logitech 5.1 506 
Other
SB 3D recon sound card 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
8350/4.8 Asus Crosshair v formula z Sapphire Vapor x 7950 Crucial BalisticTactical tracer-1866/9-9-9-24 O... 
Hard DriveHard DriveOptical DriveCooling
Crucial m4 128gb Western Digital Caviar Black 2 TB SATA III 7200... Asus Burner Corsair H100  
OSMonitorKeyboardPower
windows 7 ultimate 64 bit Asus ve258q Logitech G19 seasonic series x-1250  
CaseMouseMouse PadAudio
InWin Dragon Rider Logitech G 500 thermaltake lighted logitech 5.1 506 
Other
SB 3D recon sound card 
  hide details  
Reply
post #777 of 1515
Thanks fishhawk, I guess I can always remove a bit of material from one of the Noctua fans that I will be using if it's too tight?
Lian-Dan-Li
(0 items)
  
Reply
Lian-Dan-Li
(0 items)
  
Reply
post #778 of 1515
Hey everyone, first time poster here!
Im about to order the CM Storm Scout 2 Advanced and I was wondering if anyone had any experience in fitting a Corsair H100i at the top of the case?
I have seen a few people posting things with the rad at the front of the case but modding is sadly not an option for this build.
From what I THINK I have came across you can fit the rad at the top but with no fans inside of the case? Im looking to have a push, pull effect on the rad so two fans inside and two literally outside of the case (by removing the plastic mesh filter thing on the top)
Any reply would be much appreciated!
post #779 of 1515
Quote:
Originally Posted by 420Killah View Post

Hey everyone, first time poster here!
Im about to order the CM Storm Scout 2 Advanced and I was wondering if anyone had any experience in fitting a Corsair H100i at the top of the case?
I have seen a few people posting things with the rad at the front of the case but modding is sadly not an option for this build.
From what I THINK I have came across you can fit the rad at the top but with no fans inside of the case? Im looking to have a push, pull effect on the rad so two fans inside and two literally outside of the case (by removing the plastic mesh filter thing on the top)
Any reply would be much appreciated!

No go for a push/pull on top without removing the handle Edit: Well I guess you could use the highly inefficient "thin" fans previously mentioned HERE post#763 ... and actually even fitting the stock 2 fan H100i on the top is not ideal as the case grill on top will NOT re-latch completely redface.gif

See THIS video at the 8:40 min mark thumb.gif
Edited by TomcatV - 5/12/13 at 1:20pm
 
Too Easy
(17 items)
 
 
CPUMotherboardGraphicsGraphics
6700K 47/44GHz@1.296v or 48/45@1.360v Adaptive ... Z170 ASUS HERO VIII LGA 1151 (Bios 2202) Evga GTX 1080 SC "SOLD $525" no bios editor! Gigabyte G1 GTX 980Ti 1519/8002 24/7 Bios modded! 
RAMHard DriveHard DriveCooling
TridentZ 3600 15-15-15-36-1T [F4-3600C16D-16GTZ ] Samsung Evo SSD 500GB (boot) Crucial MX300 SSD 1TB (storage) Kraken X61  
OSMonitorMonitorKeyboard
Win10 64bit (sucks) Overlord 27" "Glossy" 1440p@120Hz QNIX QX2710 "Glossy" 1440p@120Hz+  Corsair K65 RGB Cherry Red 
PowerCaseMouseMouse Pad
EVGA SuperNOVA 1200 P2 Platinum NZXT H440 (Hate it!) Logitech G502 / Razer Deathader Rocketfish "Speed" 
Audio
Sound Blaster Z w/ Logitech Z680 5.1 Speakers  
CPUMotherboardGraphicsRAM
2500K@4.6 24/7 ASRock Z68 Ext4 Gen3 (bios 1.10) Gigabyte G1 GTX 980Ti 1532/8002 24/7 Bios modded GSkill F3-17000CL11D-8GBXL 1.54v 
Hard DriveHard DriveOptical DriveCooling
Samsung 850 Evo 500GB 1T Samsung F3-storage Asus 24x H100 top exhaust (push/pull kinda?) 
OSMonitorMonitorKeyboard
Win7-64bit SP1  QNIX QX2710 "Glossy" 1440p@120Hz++ (1st gen L02... Overlord 27" Glossy 1440p@120Hz Corsair K65 RGB Cherry Red 
PowerCaseMouseMouse Pad
Corsair HX850w Haf 922 (modded) Logitech G502 Rocketfish Speed 
Audio
Sound Blaster Z w/ Logitech Z680 5.1 Speakers  
  hide details  
Reply
 
Too Easy
(17 items)
 
 
CPUMotherboardGraphicsGraphics
6700K 47/44GHz@1.296v or 48/45@1.360v Adaptive ... Z170 ASUS HERO VIII LGA 1151 (Bios 2202) Evga GTX 1080 SC "SOLD $525" no bios editor! Gigabyte G1 GTX 980Ti 1519/8002 24/7 Bios modded! 
RAMHard DriveHard DriveCooling
TridentZ 3600 15-15-15-36-1T [F4-3600C16D-16GTZ ] Samsung Evo SSD 500GB (boot) Crucial MX300 SSD 1TB (storage) Kraken X61  
OSMonitorMonitorKeyboard
Win10 64bit (sucks) Overlord 27" "Glossy" 1440p@120Hz QNIX QX2710 "Glossy" 1440p@120Hz+  Corsair K65 RGB Cherry Red 
PowerCaseMouseMouse Pad
EVGA SuperNOVA 1200 P2 Platinum NZXT H440 (Hate it!) Logitech G502 / Razer Deathader Rocketfish "Speed" 
Audio
Sound Blaster Z w/ Logitech Z680 5.1 Speakers  
CPUMotherboardGraphicsRAM
2500K@4.6 24/7 ASRock Z68 Ext4 Gen3 (bios 1.10) Gigabyte G1 GTX 980Ti 1532/8002 24/7 Bios modded GSkill F3-17000CL11D-8GBXL 1.54v 
Hard DriveHard DriveOptical DriveCooling
Samsung 850 Evo 500GB 1T Samsung F3-storage Asus 24x H100 top exhaust (push/pull kinda?) 
OSMonitorMonitorKeyboard
Win7-64bit SP1  QNIX QX2710 "Glossy" 1440p@120Hz++ (1st gen L02... Overlord 27" Glossy 1440p@120Hz Corsair K65 RGB Cherry Red 
PowerCaseMouseMouse Pad
Corsair HX850w Haf 922 (modded) Logitech G502 Rocketfish Speed 
Audio
Sound Blaster Z w/ Logitech Z680 5.1 Speakers  
  hide details  
Reply
post #780 of 1515
Thanks for the reply man! Yeah I decided that I would more or less copy his idea but try to get my hands on some low profile fans for above it. I just ordered my CM Storm Scout 2 so I should have it here by Tuesday and then a build log! biggrin.gif
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Water Cooling
Overclock.net › Forums › Cooling › Water Cooling › H80 / H80i / H90 / H100 / H100i / H110 Case Compatibility Thread (Page 1 for full listings)