Overclock.net › Forums › Intel › Intel CPUs › Having Problems With My Core i7 2600K
New Posts  All Forums:Forum Nav:

Having Problems With My Core i7 2600K

post #1 of 4
Thread Starter 
hello guyz.i buy new gaming pc 2 months ago but not branded I custom maded.after using 2 months its giving me some BSOD errors like these 1.(A Clock Interrupt Was Not Received On A Secondry Processor With In The Allocated Time Interval) 2.(IRQL Not Less Or Equal) 3.(Uncorrectable Hardware Error BLUE SCREEN).ok now i will tell u my story thats what happens.when i connected my all hardware of my new rig i quickly goto BIOS and overclocks the cpu to 4.2 ghz with voltage of 1.36V which is safe range thats i know.installed windows 7 64BIT and windows vista 64BIT ultimate versions.both working fine from 2 months but i used windows vista much more then 7.i keep 7 for emergency use.its works fine with 4.2 ghz from 2 months.then i goto bios and overclocks more set to 4.7 ghz with voltage of 1.46 and all cpu features enabled (CPU Pll Overvoltage Enabled) turbo 4.7 ghz and multiplier to 47 then save and restart after rebooting windows run fine when windows loading some programs at startup its gives me BSOD of (A Clock Interrupt Was Not Received On A Secondry Processor With In The Allocated Time Interval) i quickly changed the settings to default and restart after rebooting windows loaded successfully.I used my pc 4-5 hours after that get cpu one BSOD or random BSOD which i describe on top.i checked everything all parts,cables,vga,heatsink,thermal grease,rams,power,bios updated to latest and flashed serval times,installed new windows,all latest driver,temps,checked HDD after checking thats all i still cant find solution same BSOD,S.then i think its may be power supply problem i goto BIOS and downclocked the cpu tO 3.2 GHZ turbo also 3.2 ghz and everythings defaults save and reboot after rebooting windows loaded fine and voila everything work fine i used my pc daily with 3.2 ghz its works fine and when i increased the cpu to 3.3 ghz its getting crashed with BSOD.iam reposting this q again so i figured out one new thing that when i increase vcore to 1.35 v Its works on 4.ghz but before its was working on 3.4 ghz default with every setting on default.and yes heres my pc specification!

PC SPECIFICATION
CPU = INTEL CORE I7 2600K 3.4GHZ 8MB CACHE
RAM = KINGSTON 8GB DDR3 1333 MHZ
MB = GIGABYTE Z68A-D3-B3
VGA = GIGABYTE GTX 470 1280 MB GDDR5 SOC
PSU = GIGABYTE SUPERB 550 WATTS
COOLING = 3 EXTRA STOCK FANS 3200 RPM
CD/DVD = 2 LG SUPER MULTI DRIVES
HDD = WD BLUE 320 GB 7200 RPM,WD GREEN 1TB
DISPLAY = SAMSUNG SYNCMASTER P2370HD
OS = MICROSOFT WINDOWS VISTA ULTIMATE SP2 64BIT
CONTROLLER = XBOX360 CONTROLLER FOR WINDOWS

PLZ GUYZ HELP ME FOR GOD SAKE I SPEND TO MUCH MONEY ON MY PC.Sorry For My Poor English Thank U!!!
post #2 of 4
Alright. Honestly, I can't read that mess of a paragraph you posted. I understand English isn't your native language but it's really difficult to read.

Your problem sounds like you just need to fix some settings in your BIOS. Just try these things to start:

Overclock: 4.5 ghz
Set VCore PWM mode to "Extreme" instead of T.Probe.
Set VCore Phase control to "Extreme"
Set over current protection setting to 130%.
Set the CPU PLL voltage to 1.6v
Set Load Line Calibration (or vdroop) setting to 75%

Try those settings and a voltage of 1.375v

If it works, and is stable you can then start to decrease the voltage by 0.005 (ie, next try 1.370) and stress test. If it passes, then decrease again. Keep decreasing until you get a BSOD. When you get a BSOD, increase it up by 0.005.
post #3 of 4
Thread Starter 
no i dont want to overclock i am complaining that its not stable on its default settings.i flashed the bios,check cables,drivers,everything but cant find reason why its crashing on its default settings and my bios dont have that all fetures that u describe!
post #4 of 4
Oh. Well, in that case it can be one of many issues.

When you get a BSOD what is the error code?

Quote:
Originally Posted by coolhandluke41
I think this may be helpful for some of you,found this on XS

The OverClockers BSOD code list
BSOD codes for overclocking
0x101 = increase vcore
0x124 = increase/decrease vcore or QPI/VTT...have to test to see which one it is
0x0A = unstable RAM/IMC, increase QPI first, if that doesn't work increase vcore
0x1E = increase vcore
0x3B = increase vcore
0x3D = increase vcore
0xD1 = QPI/VTT, increase/decrease as necessary, can also be unstable Ram, raise Ram voltage
0x9C = QPI/VTT most likely, but increasing vcore has helped in some instances
0x50 = RAM timings/Frequency or uncore multi unstable, increase RAM voltage or adjust QPI/VTT, or lower uncore if you're higher than 2x
0x109 = Not enough or too Much memory voltage
0x116 = Low IOH (NB) voltage, GPU issue (most common when running multi-GPU/overclocking GPU)
0x7E = Corrupted OS file, possibly from overclocking. Run sfc /scannow and chkdsk /r

and for all of you with GB mobos you should read this;
http://www.overclock.net/intel-gener...uide-p67a.html
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › Having Problems With My Core i7 2600K