Just a small update:
I've got the rig up and running now.
ATM im waiting for the 3'rd card and the 3'rd waterblock.
This is the way everything looks now.
as you can see its a mess at the back where the cpu goes into the 120 rad and then into the gpu. I have ordered a bunch of different 30/45/60 degrees, extentions, S shape connectors ect ect to get it as neat at possible.
I'm really happy with the blue colour of the Mayhem dye.
Hopefully it will not clogg the loop at the old stuff i used did.
ATM im also seeing some weird temps on the top card, i made a thread about it here
Originally Posted by Eggy88
Card 1 (Idle/load):
GPU Temps #1 37.5 / 54.0
GPU Temps #2 49.0 / 83.0
GPU Temps #3 53.0 / 92.0
VReg Temp 50.2
Card 2 (Idle/load):
GPU Temps #1 29.5 / 49.0
GPU Temps #2 30.0 / 62.5
GPU Temps #3 32.5 / 68.0
VReg Temp 51.3
Stress test is with FurMark.
The fact that Gpu Temp #2 / #3 is 30c and 40c higher than #1 on Card 1 worries me abit, i also think that 19c between #1 and #3 @ Card 2 is a bit much.
I'll try to take the cards appart and check the connection between the block and the different parts when i get the 3'rd card.