Overclock.net › Forums › Intel › Intel CPUs › Need some help with my overclock. i7-2600k @ 4.7GHz so far.
New Posts  All Forums:Forum Nav:

Need some help with my overclock. i7-2600k @ 4.7GHz so far. - Page 5

post #41 of 56
Quote:
Originally Posted by LastBucsfan View Post
Should these be disabled by the way?
No, unless you decide to start adjusting the BCLK. If you start adjusting the BCLK, then Sandy Bridge overclocking becomes more "old school" (which also means that CPU Spread Spectrum would need to be disabled too).


Quote:
Originally Posted by LastBucsfan View Post
C3 and C6 disabled though?
Only when using an Offset.


Quote:
Originally Posted by LastBucsfan View Post
With C1E and EIST enabled, C3 and C6 disabled my CPU was running at max clock all the time... I thought that was odd myself. It's not supposed to do that right?
Indeed.

May I see all of your settings in the UEFI?
It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
post #42 of 56
Thread Starter 
Quote:
Originally Posted by TwoCables View Post
No, unless you decide to start adjusting the BCLK. If you start adjusting the BCLK, then Sandy Bridge overclocking becomes more "old school" (which also means that CPU Spread Spectrum would need to be disabled too).



Only when using an Offset.



Indeed.

May I see all of your settings in the UEFI?
Sure I can post some when I get home from work. What was the screenshot key for the BIOS again?

I figured out that the reason the CPU was not throttling was actually my Windows power settings. I thought I had switched it to 'Balanced' but it was on 'High Performance' keeping the CPU at 100% always. Now the CPU frequency will throttle, but voltage stays pegged... doesn't that defeat the purpose?

I also need some more help with my overclock. I keep getting BCCode 101 after a couple hours. I've bumped vcore up to 1.4 manual which is giving me about 1.384 under load and letting it stress while I'm at work. Am I still heading in the right direction or am I missing something else?

I've also tried dropping my VCCIO back to auto to try and counter some heat from the voltage. I'm not sure if the extra VCCIO voltage is necessary right now with my RAM at stock speeds?

EDIT: Forgot to mention I also dropped PLL voltage to 1.55 based on some reading I did around the forums. Hopefully this will pass Prime95 today!
Edited by LastBucsfan - 10/26/11 at 6:11am
Desktop
(13 items)
 
   
CPUMotherboardGraphicsRAM
i7-2600k [4.7 GHz @ 1.376v] ASUS P8P67 PRO Rev 3.1 MSI GTX 580 Lightning Extreme [950/1900/2100 1.1v] GSkill Ripjaws 8GB [2133 MHz 9-11-10-28-1T] 
Hard DriveOptical DriveOSMonitor
WD VelociRaptor 300GB / 2x Samsung F3 1TB RAID 0 Sony Optiarc 24x DVD/CD-RW Windows 10 x64 Asus VN247 24" 1920x1080 Dual Monitors 
KeyboardPowerCase
Ducky Shine DK-9008 Overclock.net Edition Corsair TX750 CoolerMaster HAF 932 Full Tower 
CPUMotherboardGraphicsRAM
Intel Core i7-7700HQ [3.8 GHz turbo] ASUS GL753VD Nvidia GeForce GTX 1050 [4GB DDR5] 16GB DDR4 2400MHz [17-17-17-39-2T] 
Hard DriveOptical DriveOSMonitor
Hitatchi 1 TB 7200RPM DL DVD+-RW/CD-RW Windows 10 x64 17.3" LED 
  hide details  
Reply
Desktop
(13 items)
 
   
CPUMotherboardGraphicsRAM
i7-2600k [4.7 GHz @ 1.376v] ASUS P8P67 PRO Rev 3.1 MSI GTX 580 Lightning Extreme [950/1900/2100 1.1v] GSkill Ripjaws 8GB [2133 MHz 9-11-10-28-1T] 
Hard DriveOptical DriveOSMonitor
WD VelociRaptor 300GB / 2x Samsung F3 1TB RAID 0 Sony Optiarc 24x DVD/CD-RW Windows 10 x64 Asus VN247 24" 1920x1080 Dual Monitors 
KeyboardPowerCase
Ducky Shine DK-9008 Overclock.net Edition Corsair TX750 CoolerMaster HAF 932 Full Tower 
CPUMotherboardGraphicsRAM
Intel Core i7-7700HQ [3.8 GHz turbo] ASUS GL753VD Nvidia GeForce GTX 1050 [4GB DDR5] 16GB DDR4 2400MHz [17-17-17-39-2T] 
Hard DriveOptical DriveOSMonitor
Hitatchi 1 TB 7200RPM DL DVD+-RW/CD-RW Windows 10 x64 17.3" LED 
  hide details  
Reply
post #43 of 56
Thread Starter 
Just talked to my wife at home and she said right before she left for work one of the cores hit a max of 89c..... This is not a very safe temperature range is it? It was in the low 80's current temp on all cores though. It just seems to be spiking a little high every now and then. Any suggestions? Going to be 6 1/2 hours before I can check it again.. I sure hope it doesn't get any worse.
Desktop
(13 items)
 
   
CPUMotherboardGraphicsRAM
i7-2600k [4.7 GHz @ 1.376v] ASUS P8P67 PRO Rev 3.1 MSI GTX 580 Lightning Extreme [950/1900/2100 1.1v] GSkill Ripjaws 8GB [2133 MHz 9-11-10-28-1T] 
Hard DriveOptical DriveOSMonitor
WD VelociRaptor 300GB / 2x Samsung F3 1TB RAID 0 Sony Optiarc 24x DVD/CD-RW Windows 10 x64 Asus VN247 24" 1920x1080 Dual Monitors 
KeyboardPowerCase
Ducky Shine DK-9008 Overclock.net Edition Corsair TX750 CoolerMaster HAF 932 Full Tower 
CPUMotherboardGraphicsRAM
Intel Core i7-7700HQ [3.8 GHz turbo] ASUS GL753VD Nvidia GeForce GTX 1050 [4GB DDR5] 16GB DDR4 2400MHz [17-17-17-39-2T] 
Hard DriveOptical DriveOSMonitor
Hitatchi 1 TB 7200RPM DL DVD+-RW/CD-RW Windows 10 x64 17.3" LED 
  hide details  
Reply
Desktop
(13 items)
 
   
CPUMotherboardGraphicsRAM
i7-2600k [4.7 GHz @ 1.376v] ASUS P8P67 PRO Rev 3.1 MSI GTX 580 Lightning Extreme [950/1900/2100 1.1v] GSkill Ripjaws 8GB [2133 MHz 9-11-10-28-1T] 
Hard DriveOptical DriveOSMonitor
WD VelociRaptor 300GB / 2x Samsung F3 1TB RAID 0 Sony Optiarc 24x DVD/CD-RW Windows 10 x64 Asus VN247 24" 1920x1080 Dual Monitors 
KeyboardPowerCase
Ducky Shine DK-9008 Overclock.net Edition Corsair TX750 CoolerMaster HAF 932 Full Tower 
CPUMotherboardGraphicsRAM
Intel Core i7-7700HQ [3.8 GHz turbo] ASUS GL753VD Nvidia GeForce GTX 1050 [4GB DDR5] 16GB DDR4 2400MHz [17-17-17-39-2T] 
Hard DriveOptical DriveOSMonitor
Hitatchi 1 TB 7200RPM DL DVD+-RW/CD-RW Windows 10 x64 17.3" LED 
  hide details  
Reply
post #44 of 56
Yes, that's awfully close to thermal throttling where your cpu will slow down to save itself - 95C. Most will recommend only allowing peak bench testing temps of 80C or 85C.

I wouldn't have expected 90C from an H70, do you have high ambient temps, or possibly poor case ventilation?
The Latest
(14 items)
 
  
CPUMotherboardGraphicsRAM
2600K P8Z68-V Pro Gen3 EVGA GTX580 SSC 8G Patriot PC3-15000 
Hard DriveCoolingOSMonitor
2@WD Caviar Black 1TB Corsair H80 7/64 VG236 120Hz 
PowerCase
AX850 T600 
  hide details  
Reply
The Latest
(14 items)
 
  
CPUMotherboardGraphicsRAM
2600K P8Z68-V Pro Gen3 EVGA GTX580 SSC 8G Patriot PC3-15000 
Hard DriveCoolingOSMonitor
2@WD Caviar Black 1TB Corsair H80 7/64 VG236 120Hz 
PowerCase
AX850 T600 
  hide details  
Reply
post #45 of 56
Thread Starter 
Quote:
Originally Posted by keto View Post
Yes, that's awfully close to thermal throttling where your cpu will slow down to save itself - 95C. Most will recommend only allowing peak bench testing temps of 80C or 85C.

I wouldn't have expected 90C from an H70, do you have high ambient temps, or possibly poor case ventilation?
Ambient in my house is 75F day and 73F night. I have a HAF 932 and its well dusted out so I dont know why ventilation would be bad...

Sent from my PG86100 using Tapatalk
Desktop
(13 items)
 
   
CPUMotherboardGraphicsRAM
i7-2600k [4.7 GHz @ 1.376v] ASUS P8P67 PRO Rev 3.1 MSI GTX 580 Lightning Extreme [950/1900/2100 1.1v] GSkill Ripjaws 8GB [2133 MHz 9-11-10-28-1T] 
Hard DriveOptical DriveOSMonitor
WD VelociRaptor 300GB / 2x Samsung F3 1TB RAID 0 Sony Optiarc 24x DVD/CD-RW Windows 10 x64 Asus VN247 24" 1920x1080 Dual Monitors 
KeyboardPowerCase
Ducky Shine DK-9008 Overclock.net Edition Corsair TX750 CoolerMaster HAF 932 Full Tower 
CPUMotherboardGraphicsRAM
Intel Core i7-7700HQ [3.8 GHz turbo] ASUS GL753VD Nvidia GeForce GTX 1050 [4GB DDR5] 16GB DDR4 2400MHz [17-17-17-39-2T] 
Hard DriveOptical DriveOSMonitor
Hitatchi 1 TB 7200RPM DL DVD+-RW/CD-RW Windows 10 x64 17.3" LED 
  hide details  
Reply
Desktop
(13 items)
 
   
CPUMotherboardGraphicsRAM
i7-2600k [4.7 GHz @ 1.376v] ASUS P8P67 PRO Rev 3.1 MSI GTX 580 Lightning Extreme [950/1900/2100 1.1v] GSkill Ripjaws 8GB [2133 MHz 9-11-10-28-1T] 
Hard DriveOptical DriveOSMonitor
WD VelociRaptor 300GB / 2x Samsung F3 1TB RAID 0 Sony Optiarc 24x DVD/CD-RW Windows 10 x64 Asus VN247 24" 1920x1080 Dual Monitors 
KeyboardPowerCase
Ducky Shine DK-9008 Overclock.net Edition Corsair TX750 CoolerMaster HAF 932 Full Tower 
CPUMotherboardGraphicsRAM
Intel Core i7-7700HQ [3.8 GHz turbo] ASUS GL753VD Nvidia GeForce GTX 1050 [4GB DDR5] 16GB DDR4 2400MHz [17-17-17-39-2T] 
Hard DriveOptical DriveOSMonitor
Hitatchi 1 TB 7200RPM DL DVD+-RW/CD-RW Windows 10 x64 17.3" LED 
  hide details  
Reply
post #46 of 56
Well, you're 20C higher than my H80 at max load peak, and I don't think there's that much difference between the 2 coolers. If you have any thermal compound, I would check the seating of your H70 on the cpu - pull off the head and look at the pattern in the existing compound, are you getting full contact and coverage? Clean off existing compound and apply new, reseat the head making sure it's nice and square and tight.

Just a suggestion

Too, it could be your fan configuration - are you bringing outside air into your H70 or inside case air? Are you using 1 fan on it, or 2? I use 2 and mount it so that it brings in outside air into the case, I have fans 2x120 up top ventilating.
Edited by keto - 10/26/11 at 10:26am
The Latest
(14 items)
 
  
CPUMotherboardGraphicsRAM
2600K P8Z68-V Pro Gen3 EVGA GTX580 SSC 8G Patriot PC3-15000 
Hard DriveCoolingOSMonitor
2@WD Caviar Black 1TB Corsair H80 7/64 VG236 120Hz 
PowerCase
AX850 T600 
  hide details  
Reply
The Latest
(14 items)
 
  
CPUMotherboardGraphicsRAM
2600K P8Z68-V Pro Gen3 EVGA GTX580 SSC 8G Patriot PC3-15000 
Hard DriveCoolingOSMonitor
2@WD Caviar Black 1TB Corsair H80 7/64 VG236 120Hz 
PowerCase
AX850 T600 
  hide details  
Reply
post #47 of 56
Thread Starter 
Maybe I need to reseat the water pump?

Sent from my PG86100 using Tapatalk
Desktop
(13 items)
 
   
CPUMotherboardGraphicsRAM
i7-2600k [4.7 GHz @ 1.376v] ASUS P8P67 PRO Rev 3.1 MSI GTX 580 Lightning Extreme [950/1900/2100 1.1v] GSkill Ripjaws 8GB [2133 MHz 9-11-10-28-1T] 
Hard DriveOptical DriveOSMonitor
WD VelociRaptor 300GB / 2x Samsung F3 1TB RAID 0 Sony Optiarc 24x DVD/CD-RW Windows 10 x64 Asus VN247 24" 1920x1080 Dual Monitors 
KeyboardPowerCase
Ducky Shine DK-9008 Overclock.net Edition Corsair TX750 CoolerMaster HAF 932 Full Tower 
CPUMotherboardGraphicsRAM
Intel Core i7-7700HQ [3.8 GHz turbo] ASUS GL753VD Nvidia GeForce GTX 1050 [4GB DDR5] 16GB DDR4 2400MHz [17-17-17-39-2T] 
Hard DriveOptical DriveOSMonitor
Hitatchi 1 TB 7200RPM DL DVD+-RW/CD-RW Windows 10 x64 17.3" LED 
  hide details  
Reply
Desktop
(13 items)
 
   
CPUMotherboardGraphicsRAM
i7-2600k [4.7 GHz @ 1.376v] ASUS P8P67 PRO Rev 3.1 MSI GTX 580 Lightning Extreme [950/1900/2100 1.1v] GSkill Ripjaws 8GB [2133 MHz 9-11-10-28-1T] 
Hard DriveOptical DriveOSMonitor
WD VelociRaptor 300GB / 2x Samsung F3 1TB RAID 0 Sony Optiarc 24x DVD/CD-RW Windows 10 x64 Asus VN247 24" 1920x1080 Dual Monitors 
KeyboardPowerCase
Ducky Shine DK-9008 Overclock.net Edition Corsair TX750 CoolerMaster HAF 932 Full Tower 
CPUMotherboardGraphicsRAM
Intel Core i7-7700HQ [3.8 GHz turbo] ASUS GL753VD Nvidia GeForce GTX 1050 [4GB DDR5] 16GB DDR4 2400MHz [17-17-17-39-2T] 
Hard DriveOptical DriveOSMonitor
Hitatchi 1 TB 7200RPM DL DVD+-RW/CD-RW Windows 10 x64 17.3" LED 
  hide details  
Reply
post #48 of 56
Thread Starter 
I have some AS5

Sent from my PG86100 using Tapatalk
Desktop
(13 items)
 
   
CPUMotherboardGraphicsRAM
i7-2600k [4.7 GHz @ 1.376v] ASUS P8P67 PRO Rev 3.1 MSI GTX 580 Lightning Extreme [950/1900/2100 1.1v] GSkill Ripjaws 8GB [2133 MHz 9-11-10-28-1T] 
Hard DriveOptical DriveOSMonitor
WD VelociRaptor 300GB / 2x Samsung F3 1TB RAID 0 Sony Optiarc 24x DVD/CD-RW Windows 10 x64 Asus VN247 24" 1920x1080 Dual Monitors 
KeyboardPowerCase
Ducky Shine DK-9008 Overclock.net Edition Corsair TX750 CoolerMaster HAF 932 Full Tower 
CPUMotherboardGraphicsRAM
Intel Core i7-7700HQ [3.8 GHz turbo] ASUS GL753VD Nvidia GeForce GTX 1050 [4GB DDR5] 16GB DDR4 2400MHz [17-17-17-39-2T] 
Hard DriveOptical DriveOSMonitor
Hitatchi 1 TB 7200RPM DL DVD+-RW/CD-RW Windows 10 x64 17.3" LED 
  hide details  
Reply
Desktop
(13 items)
 
   
CPUMotherboardGraphicsRAM
i7-2600k [4.7 GHz @ 1.376v] ASUS P8P67 PRO Rev 3.1 MSI GTX 580 Lightning Extreme [950/1900/2100 1.1v] GSkill Ripjaws 8GB [2133 MHz 9-11-10-28-1T] 
Hard DriveOptical DriveOSMonitor
WD VelociRaptor 300GB / 2x Samsung F3 1TB RAID 0 Sony Optiarc 24x DVD/CD-RW Windows 10 x64 Asus VN247 24" 1920x1080 Dual Monitors 
KeyboardPowerCase
Ducky Shine DK-9008 Overclock.net Edition Corsair TX750 CoolerMaster HAF 932 Full Tower 
CPUMotherboardGraphicsRAM
Intel Core i7-7700HQ [3.8 GHz turbo] ASUS GL753VD Nvidia GeForce GTX 1050 [4GB DDR5] 16GB DDR4 2400MHz [17-17-17-39-2T] 
Hard DriveOptical DriveOSMonitor
Hitatchi 1 TB 7200RPM DL DVD+-RW/CD-RW Windows 10 x64 17.3" LED 
  hide details  
Reply
post #49 of 56
Thread Starter 
Reseating the processor lowered temps about 3-4c, so that is good.

Is it possible that it would require less voltage in offset mode instead of manual mode to be stable? 4.7 GHz would crash very quickly with 1.368 voltage under load in manual but 1.368 volts under load in offset mode has been running for a while longer.
Desktop
(13 items)
 
   
CPUMotherboardGraphicsRAM
i7-2600k [4.7 GHz @ 1.376v] ASUS P8P67 PRO Rev 3.1 MSI GTX 580 Lightning Extreme [950/1900/2100 1.1v] GSkill Ripjaws 8GB [2133 MHz 9-11-10-28-1T] 
Hard DriveOptical DriveOSMonitor
WD VelociRaptor 300GB / 2x Samsung F3 1TB RAID 0 Sony Optiarc 24x DVD/CD-RW Windows 10 x64 Asus VN247 24" 1920x1080 Dual Monitors 
KeyboardPowerCase
Ducky Shine DK-9008 Overclock.net Edition Corsair TX750 CoolerMaster HAF 932 Full Tower 
CPUMotherboardGraphicsRAM
Intel Core i7-7700HQ [3.8 GHz turbo] ASUS GL753VD Nvidia GeForce GTX 1050 [4GB DDR5] 16GB DDR4 2400MHz [17-17-17-39-2T] 
Hard DriveOptical DriveOSMonitor
Hitatchi 1 TB 7200RPM DL DVD+-RW/CD-RW Windows 10 x64 17.3" LED 
  hide details  
Reply
Desktop
(13 items)
 
   
CPUMotherboardGraphicsRAM
i7-2600k [4.7 GHz @ 1.376v] ASUS P8P67 PRO Rev 3.1 MSI GTX 580 Lightning Extreme [950/1900/2100 1.1v] GSkill Ripjaws 8GB [2133 MHz 9-11-10-28-1T] 
Hard DriveOptical DriveOSMonitor
WD VelociRaptor 300GB / 2x Samsung F3 1TB RAID 0 Sony Optiarc 24x DVD/CD-RW Windows 10 x64 Asus VN247 24" 1920x1080 Dual Monitors 
KeyboardPowerCase
Ducky Shine DK-9008 Overclock.net Edition Corsair TX750 CoolerMaster HAF 932 Full Tower 
CPUMotherboardGraphicsRAM
Intel Core i7-7700HQ [3.8 GHz turbo] ASUS GL753VD Nvidia GeForce GTX 1050 [4GB DDR5] 16GB DDR4 2400MHz [17-17-17-39-2T] 
Hard DriveOptical DriveOSMonitor
Hitatchi 1 TB 7200RPM DL DVD+-RW/CD-RW Windows 10 x64 17.3" LED 
  hide details  
Reply
post #50 of 56
Quote:
Originally Posted by LastBucsfan View Post
Reseating the processor lowered temps about 3-4c, so that is good.

Is it possible that it would require less voltage in offset mode instead of manual mode to be stable? 4.7 GHz would crash very quickly with 1.368 voltage under load in manual but 1.368 volts under load in offset mode has been running for a while longer.
Well this is good timing: someone recently told me that they heard using Offset provides better overclocking results or something like that and so they were asking me if it's true. I told them I had no idea, but maybe it's true after all!
It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › Need some help with my overclock. i7-2600k @ 4.7GHz so far.