Aight guys well I have a question here. Well I have 2 swiftech 350's with a xspc duel top and noticed one of my pumps stop working. I then disassembled my whole loop did a visual inspection with the pump and didnt see anything that was out of the ordinary. I then popped the pump with the single xspc top in my test rig and it would turn over 50% of the time. I figured I might have had the screws going from the bottom of the pump to the top too tight but no luck. Next I tried to recreate the problem using both pumps with the duel top, now there both maybe turning over 50% of the time. Im a little lost here because I can tell there both trying to turn over cause I can see them slightly moving and then either pump 1 or 2 will turn over but cant get both to get going at the same time and not at a consistant basis where i fell comfortable putting my rig back together. PLZ help THX in advance.
post #1 of 5
10/24/11 at 10:42pm