Overclock.net › Forums › Intel › Intel CPUs › SB BSOD help 2500K
New Posts  All Forums:Forum Nav:

SB BSOD help 2500K

post #1 of 7
Thread Starter 
I have been running stable since may on my overclock, now all of the sudden with BF3 in getting BSOD's.

two so far actually:

0x0d1
and
0x050

i saw this:

Quote:
BSOD Codes for SandyBridge
0x124 = add/remove vcore or QPI/VTT voltage (usually Vcore, once it was QPI/VTT)
0x101 = add more vcore
0x50 = RAM timings/Frequency add DDR3 voltage or add QPI/VTT
0x1E = add more vcore
0x3B = add more vcore
0xD1 = add QPI/VTT voltage
“0x9C = QPI/VTT most likely, but increasing vcore has helped in some instancesâ€
0X109 = add DDR3 voltage
0x0A = add QPI/VTT voltage
so its a RAM issue, hmm, should I add more volts or what? I'm going to test memtest right now.
Hasy-E
(19 items)
 
Westy-EP
(14 items)
 
NP8153
(9 items)
 
CPUMotherboardGraphicsRAM
Intel Core i7-6700HQ Intel® HM170 Express Chipset NVIDIA® GeForce™ GTX 1070 GPU with 8GB GDDR5 16GB Dual Channel DDR4 2400MHz 
Hard DriveHard DriveOSMonitor
SAMSUNG 850 EVO 500GB M2 HGST Travelstar 1TB 7200RPM  Windows 10 Pro 64-bit 15.6" 1080P IPS with G-SYNC Technology 
Keyboard
Color illuminated keyboard 
  hide details  
Reply
Hasy-E
(19 items)
 
Westy-EP
(14 items)
 
NP8153
(9 items)
 
CPUMotherboardGraphicsRAM
Intel Core i7-6700HQ Intel® HM170 Express Chipset NVIDIA® GeForce™ GTX 1070 GPU with 8GB GDDR5 16GB Dual Channel DDR4 2400MHz 
Hard DriveHard DriveOSMonitor
SAMSUNG 850 EVO 500GB M2 HGST Travelstar 1TB 7200RPM  Windows 10 Pro 64-bit 15.6" 1080P IPS with G-SYNC Technology 
Keyboard
Color illuminated keyboard 
  hide details  
Reply
post #2 of 7
By that table I would say try more vtt voltage if your RAM check out OK.
post #3 of 7
Thread Starter 
yeah my ram checked out OK.

what should I set my vtt/qpi volts at? I think stock is 1.05v
Hasy-E
(19 items)
 
Westy-EP
(14 items)
 
NP8153
(9 items)
 
CPUMotherboardGraphicsRAM
Intel Core i7-6700HQ Intel® HM170 Express Chipset NVIDIA® GeForce™ GTX 1070 GPU with 8GB GDDR5 16GB Dual Channel DDR4 2400MHz 
Hard DriveHard DriveOSMonitor
SAMSUNG 850 EVO 500GB M2 HGST Travelstar 1TB 7200RPM  Windows 10 Pro 64-bit 15.6" 1080P IPS with G-SYNC Technology 
Keyboard
Color illuminated keyboard 
  hide details  
Reply
Hasy-E
(19 items)
 
Westy-EP
(14 items)
 
NP8153
(9 items)
 
CPUMotherboardGraphicsRAM
Intel Core i7-6700HQ Intel® HM170 Express Chipset NVIDIA® GeForce™ GTX 1070 GPU with 8GB GDDR5 16GB Dual Channel DDR4 2400MHz 
Hard DriveHard DriveOSMonitor
SAMSUNG 850 EVO 500GB M2 HGST Travelstar 1TB 7200RPM  Windows 10 Pro 64-bit 15.6" 1080P IPS with G-SYNC Technology 
Keyboard
Color illuminated keyboard 
  hide details  
Reply
post #4 of 7
Increase it in small increments as possible, you shouldn't need anything higher than 1.15v unless you're overclocking the RAM.
it looks alive
(17 items)
 
Sandy Transformed
(69 photos)
 
CPUMotherboardGraphicsRAM
i5 2500K [5ghz 1.44v 24/7] Asus Maximus IV Extreme SLI GTX 460 @ 920/1840/4100 [1.11v] 4GB Dominator GT @ 2133mhz CL8 [1.65v] 
Hard DriveHard DriveCoolingOS
Intel X25-M G2 80GB 3x Samsung F3 500GB RAID 0 EK Supreme HF Full Copper Windows 7 Ultimate 64bit 
MonitorPowerCaseAudio
LG42SL9500 42" 1080p [Surround Soon] XFX XXX Edition 650w Xigmatec Elysium JVC HA-RX700 [foam mod] 
  hide details  
Reply
it looks alive
(17 items)
 
Sandy Transformed
(69 photos)
 
CPUMotherboardGraphicsRAM
i5 2500K [5ghz 1.44v 24/7] Asus Maximus IV Extreme SLI GTX 460 @ 920/1840/4100 [1.11v] 4GB Dominator GT @ 2133mhz CL8 [1.65v] 
Hard DriveHard DriveCoolingOS
Intel X25-M G2 80GB 3x Samsung F3 500GB RAID 0 EK Supreme HF Full Copper Windows 7 Ultimate 64bit 
MonitorPowerCaseAudio
LG42SL9500 42" 1080p [Surround Soon] XFX XXX Edition 650w Xigmatec Elysium JVC HA-RX700 [foam mod] 
  hide details  
Reply
post #5 of 7
Thread Starter 
Quote:
Originally Posted by munaim1 View Post
Increase it in small increments as possible, you shouldn't need anything higher than 1.15v unless you're overclocking the RAM.
alright, raised it to 1.055v, and will continue to raise it if I get more BSOD's.

yeah my RAM is at stock mhz (1866mhz) and Im using the XMP profile on it.
Hasy-E
(19 items)
 
Westy-EP
(14 items)
 
NP8153
(9 items)
 
CPUMotherboardGraphicsRAM
Intel Core i7-6700HQ Intel® HM170 Express Chipset NVIDIA® GeForce™ GTX 1070 GPU with 8GB GDDR5 16GB Dual Channel DDR4 2400MHz 
Hard DriveHard DriveOSMonitor
SAMSUNG 850 EVO 500GB M2 HGST Travelstar 1TB 7200RPM  Windows 10 Pro 64-bit 15.6" 1080P IPS with G-SYNC Technology 
Keyboard
Color illuminated keyboard 
  hide details  
Reply
Hasy-E
(19 items)
 
Westy-EP
(14 items)
 
NP8153
(9 items)
 
CPUMotherboardGraphicsRAM
Intel Core i7-6700HQ Intel® HM170 Express Chipset NVIDIA® GeForce™ GTX 1070 GPU with 8GB GDDR5 16GB Dual Channel DDR4 2400MHz 
Hard DriveHard DriveOSMonitor
SAMSUNG 850 EVO 500GB M2 HGST Travelstar 1TB 7200RPM  Windows 10 Pro 64-bit 15.6" 1080P IPS with G-SYNC Technology 
Keyboard
Color illuminated keyboard 
  hide details  
Reply
post #6 of 7
My Giga board is not the same as yours, but my Patriot 1866 won't work at ALL at XPM....but if I go in and set things manually, as is usually recommended, it ticks along fine. I have my VTT at 1.18 now, 1.20 is generally considered acceptable and I did need a bump to run BCLK above 102.

so, memory not by SPD or XMP but MANUAL then the multi comes up, use 18.6x, that opens up the timings which you can then go set manually, if your bios is the same as mine. Also, you probably don't want to run your memory TURBO (dunno whether you do or not, just saying), I have mem turbo disabled and it was an important step in my overclock.
The Latest
(14 items)
 
  
CPUMotherboardGraphicsRAM
2600K P8Z68-V Pro Gen3 EVGA GTX580 SSC 8G Patriot PC3-15000 
Hard DriveCoolingOSMonitor
2@WD Caviar Black 1TB Corsair H80 7/64 VG236 120Hz 
PowerCase
AX850 T600 
  hide details  
Reply
The Latest
(14 items)
 
  
CPUMotherboardGraphicsRAM
2600K P8Z68-V Pro Gen3 EVGA GTX580 SSC 8G Patriot PC3-15000 
Hard DriveCoolingOSMonitor
2@WD Caviar Black 1TB Corsair H80 7/64 VG236 120Hz 
PowerCase
AX850 T600 
  hide details  
Reply
post #7 of 7
Thread Starter 
Quote:
Originally Posted by keto View Post
My Giga board is not the same as yours, but my Patriot 1866 won't work at ALL at XPM....but if I go in and set things manually, as is usually recommended, it ticks along fine. I have my VTT at 1.18 now, 1.20 is generally considered acceptable and I did need a bump to run BCLK above 102.

so, memory not by SPD or XMP but MANUAL then the multi comes up, use 18.6x, that opens up the timings which you can then go set manually, if your bios is the same as mine. Also, you probably don't want to run your memory TURBO (dunno whether you do or not, just saying), I have mem turbo disabled and it was an important step in my overclock.
yeah so far 1.055v is doing it, but lets see if it keeps up without giving me a BSOD, I hope that fixed it, if not I'll look into volting it up more or other solutions.
Hasy-E
(19 items)
 
Westy-EP
(14 items)
 
NP8153
(9 items)
 
CPUMotherboardGraphicsRAM
Intel Core i7-6700HQ Intel® HM170 Express Chipset NVIDIA® GeForce™ GTX 1070 GPU with 8GB GDDR5 16GB Dual Channel DDR4 2400MHz 
Hard DriveHard DriveOSMonitor
SAMSUNG 850 EVO 500GB M2 HGST Travelstar 1TB 7200RPM  Windows 10 Pro 64-bit 15.6" 1080P IPS with G-SYNC Technology 
Keyboard
Color illuminated keyboard 
  hide details  
Reply
Hasy-E
(19 items)
 
Westy-EP
(14 items)
 
NP8153
(9 items)
 
CPUMotherboardGraphicsRAM
Intel Core i7-6700HQ Intel® HM170 Express Chipset NVIDIA® GeForce™ GTX 1070 GPU with 8GB GDDR5 16GB Dual Channel DDR4 2400MHz 
Hard DriveHard DriveOSMonitor
SAMSUNG 850 EVO 500GB M2 HGST Travelstar 1TB 7200RPM  Windows 10 Pro 64-bit 15.6" 1080P IPS with G-SYNC Technology 
Keyboard
Color illuminated keyboard 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › SB BSOD help 2500K