Overclock.net › Forums › Intel › Intel Motherboards › [Official] ASUS ROG Rampage IV X79 Owner's Club
New Posts  All Forums:Forum Nav:

[Official] ASUS ROG Rampage IV X79 Owner's Club - Page 366

post #3651 of 9802
sir KaRLiToS and sir UNOE thank you both and i just did set them manually now my settings for Vcore is: 1.368 but in offset mode and VTT 1.75 and VCCSA 1.160 but in windows when i stress them with prime95 they will rise not the vcore but VTT and VCCSA, VTT will go around 1.97 and VCCSA will be 1.91, how about this is it normal or is there somethig wrong here too? and i cant get it stable on 4.5 and this inability to get it stable at this voltage just happened when i updated my bios to 3301 i guess and then i reverted back to 3101 and now im at 3404, and i kinda feel like i have bad chip in here frown.gif and also the pll is on 1.6 and prime will give me BSOD with error of "a clock ....." something like this i didnt read it completely so u think i should rise the voltages? all i know is i shouldnt set the VCCSA higher than 1.2, and BTW when i updated to 3404 those voltages with VTT and VCCSA were both affected and lowered like hell before i update my bios the normal condition for both of them were higher than 1.1 just a little, but after that update they were both lower like 1.008 or 1.000 i guess, and if i set those VTT and VCCSA for 4.5 lower than 1.75 and 1.60 i will have my BSOD in less than 20 minutes wth.gif
Void Ray
(31 items)
 
  
CPUMotherboardGraphicsGraphics
Intel Core i7 3930K Rampage IV Formula Zotac GTX 980 Reference Zotac GTX 980 Reference 
RAMHard DriveHard DriveHard Drive
Corsair Dominator GT Corsair Force GT Plextor M5 Pro Xtreme WD Caviar Green 
Hard DriveOptical DriveOptical DriveCooling
Toshiba SATA 6.0Gb Pioneer BDR-S07XLT Pioneer BDR-S07XLT XSPC Raystorm 
CoolingCoolingCoolingCooling
XSPC AX240 RAD XSPC RX120 RAD XSPC RX360 RAD XSPC GTX980 Razor Waterblock 
CoolingCoolingOSMonitor
XSPC GTX980 Razor Waterblock XSPC D5 Vario Windows 7 Ultimate x64 Asus VG-236H 3D 
MonitorMonitorKeyboardPower
Asus VG-236H 3D Asus VG-236H 3D Corsair K95 Chroma Enermax Revolution87+ Gold 1200W 
CaseMouseMouse PadAudio
Corsair 750D Razer Naga Epic Chroma Steelseries Ninjas in Pyjamas Pioneer VSX-520 Todoroki 
AudioOtherOther
Razer Kraken 7.1 Chroma Corsair M65 RGB Razer Orbweaver Chroma 
  hide details  
Reply
Void Ray
(31 items)
 
  
CPUMotherboardGraphicsGraphics
Intel Core i7 3930K Rampage IV Formula Zotac GTX 980 Reference Zotac GTX 980 Reference 
RAMHard DriveHard DriveHard Drive
Corsair Dominator GT Corsair Force GT Plextor M5 Pro Xtreme WD Caviar Green 
Hard DriveOptical DriveOptical DriveCooling
Toshiba SATA 6.0Gb Pioneer BDR-S07XLT Pioneer BDR-S07XLT XSPC Raystorm 
CoolingCoolingCoolingCooling
XSPC AX240 RAD XSPC RX120 RAD XSPC RX360 RAD XSPC GTX980 Razor Waterblock 
CoolingCoolingOSMonitor
XSPC GTX980 Razor Waterblock XSPC D5 Vario Windows 7 Ultimate x64 Asus VG-236H 3D 
MonitorMonitorKeyboardPower
Asus VG-236H 3D Asus VG-236H 3D Corsair K95 Chroma Enermax Revolution87+ Gold 1200W 
CaseMouseMouse PadAudio
Corsair 750D Razer Naga Epic Chroma Steelseries Ninjas in Pyjamas Pioneer VSX-520 Todoroki 
AudioOtherOther
Razer Kraken 7.1 Chroma Corsair M65 RGB Razer Orbweaver Chroma 
  hide details  
Reply
post #3652 of 9802
Quote:
Originally Posted by Void-Ray View Post

sir KaRLiToS and sir UNOE thank you both and i just did set them manually now my settings for Vcore is: 1.368 but in offset mode and VTT 1.75 and VCCSA 1.160 but in windows when i stress them with prime95 they will rise not the vcore but VTT and VCCSA, VTT will go around 1.97 and VCCSA will be 1.91, how about this is it normal or is there somethig wrong here too? and i cant get it stable on 4.5 and this inability to get it stable at this voltage just happened when i updated my bios to 3301 i guess and then i reverted back to 3101 and now im at 3404, and i kinda feel like i have bad chip in here frown.gif and also the pll is on 1.6 and prime will give me BSOD with error of "a clock ....." something like this i didnt read it completely so u think i should rise the voltages? all i know is i shouldnt set the VCCSA higher than 1.2, and BTW when i updated to 3404 those voltages with VTT and VCCSA were both affected and lowered like hell before i update my bios the normal condition for both of them were higher than 1.1 just a little, but after that update they were both lower like 1.008 or 1.000 i guess, and if i set those VTT and VCCSA for 4.5 lower than 1.75 and 1.60 i will have my BSOD in less than 20 minutes wth.gif
You didn't read my post, look what I said "VTT try 1.05v to 1.17 (you can go up to 1.25v) VCCSA 1.05 to 1.15 (You can go up to 1.20v)"
You don't want to run VTT that high change it now !!!!

Edit: You could kill your chip if you don't read carefully. 1.75v for VTT is terribly high.
Edited by UNOE - 1/27/13 at 3:45pm
 
4x r290's
(9 items)
 
3x 7970's
(16 items)
 
CPUMotherboardGraphicsGraphics
i7 3930K 4.8Ghz offset ASUS X79 Rampage IV Extreme GTX 780 with EK waterblock GTX 780 with EK waterblock 
GraphicsRAMHard DriveHard Drive
GTX 780 with EK waterblock  Samsung 16GB (4x4gb) 2400Mhz 10-12-12-31-1t @ 1... 256GB Samsung 950 Pro 256GB Samsung 840 Pro 
CoolingCoolingOSMonitor
RX360, EX360, EX360, and 480 Rad's XSPC Raystorm CPU Block Dual boot (other unnamed OS) and Win8 Pro QNIX QX2710 27" 2560x1440 @ 112hz 
KeyboardPowerCase
Corsair K90 Corsair AX1200 Corsair 700D Modded w/ External Radiators 
CPUMotherboardGraphicsRAM
Intel i5 3570K GA-Z77X-UD3H 4x R9 290's 8GB 1600Mhz 
Hard DriveOSPowerCase
1TB Hard Drive Win8 Corsair Dual PSU - AX1200 and HX650 Open Case 
Other
Thee 16x Risers and One 1x Riser 
CPUMotherboardGraphicsRAM
i7 3930K 5Ghz Bench ASUS X79 Rampage IV Extreme 3x AMD 7970's w/ EK water blocks Samsung 16GB (4x4gb) 2400Mhz 10-12-12-31-1t @ 1... 
Hard DriveCoolingCoolingMonitor
128GB Samsung 830  RX360, RX240, EX360 XSPC Raystorm CPU Block QNIX QX2710 27" 2560x1440 @ 114hz 
KeyboardPowerCase
Corsair K90 Corsair AX760i Corsair 700D Modded w/ External Radiators 
  hide details  
Reply
 
4x r290's
(9 items)
 
3x 7970's
(16 items)
 
CPUMotherboardGraphicsGraphics
i7 3930K 4.8Ghz offset ASUS X79 Rampage IV Extreme GTX 780 with EK waterblock GTX 780 with EK waterblock 
GraphicsRAMHard DriveHard Drive
GTX 780 with EK waterblock  Samsung 16GB (4x4gb) 2400Mhz 10-12-12-31-1t @ 1... 256GB Samsung 950 Pro 256GB Samsung 840 Pro 
CoolingCoolingOSMonitor
RX360, EX360, EX360, and 480 Rad's XSPC Raystorm CPU Block Dual boot (other unnamed OS) and Win8 Pro QNIX QX2710 27" 2560x1440 @ 112hz 
KeyboardPowerCase
Corsair K90 Corsair AX1200 Corsair 700D Modded w/ External Radiators 
CPUMotherboardGraphicsRAM
Intel i5 3570K GA-Z77X-UD3H 4x R9 290's 8GB 1600Mhz 
Hard DriveOSPowerCase
1TB Hard Drive Win8 Corsair Dual PSU - AX1200 and HX650 Open Case 
Other
Thee 16x Risers and One 1x Riser 
CPUMotherboardGraphicsRAM
i7 3930K 5Ghz Bench ASUS X79 Rampage IV Extreme 3x AMD 7970's w/ EK water blocks Samsung 16GB (4x4gb) 2400Mhz 10-12-12-31-1t @ 1... 
Hard DriveCoolingCoolingMonitor
128GB Samsung 830  RX360, RX240, EX360 XSPC Raystorm CPU Block QNIX QX2710 27" 2560x1440 @ 114hz 
KeyboardPowerCase
Corsair K90 Corsair AX760i Corsair 700D Modded w/ External Radiators 
  hide details  
Reply
post #3653 of 9802
Quote:
Originally Posted by nleksan View Post

Hey all, while I am not currently water-cooling my board (I can't find the MIPS blocks anywhere frown.gif ), I am very intrigued by the whole "adding heatsinks to the back of the VRM area of the motherboard"!

Can anyone help me with this, or even just direct me to a post that would do so? I want to ensure that my VRM's are as absolutely cool as possible, and back-of-the-board heatsinks sounds like a sweet idea thumb.gif
Post #3642 thumb.gif
post #3654 of 9802
Quote:
Originally Posted by white118 View Post

ok have a bit of an issue here, not sure if its the motherboard, but honestly not sure what else it could be/where else to ask.

i noticed one of my ram sticks wasnt being picked up by windows. so i reseated all my dimms. then next time i booted up, it started in really low resolution and nvcp said no gpus where detected. i then checked device managaer, and both gpus(gtx 680s in sli) had a yellow sign and said they werent working and had a code 43(which i tried googling, but got me no where). i i tried the reseating the gpu's. after repeatedly messing around with them, they both work just fine if only one is plugged in. but if the other gpu is in the 4th pcie slot it wont work, even if the second gpu doesn't have power plugged in. any ideas whats going on?
Have you tried power flush and clearing cmos or take battery out of the motherboard when its unplugged ?
 
4x r290's
(9 items)
 
3x 7970's
(16 items)
 
CPUMotherboardGraphicsGraphics
i7 3930K 4.8Ghz offset ASUS X79 Rampage IV Extreme GTX 780 with EK waterblock GTX 780 with EK waterblock 
GraphicsRAMHard DriveHard Drive
GTX 780 with EK waterblock  Samsung 16GB (4x4gb) 2400Mhz 10-12-12-31-1t @ 1... 256GB Samsung 950 Pro 256GB Samsung 840 Pro 
CoolingCoolingOSMonitor
RX360, EX360, EX360, and 480 Rad's XSPC Raystorm CPU Block Dual boot (other unnamed OS) and Win8 Pro QNIX QX2710 27" 2560x1440 @ 112hz 
KeyboardPowerCase
Corsair K90 Corsair AX1200 Corsair 700D Modded w/ External Radiators 
CPUMotherboardGraphicsRAM
Intel i5 3570K GA-Z77X-UD3H 4x R9 290's 8GB 1600Mhz 
Hard DriveOSPowerCase
1TB Hard Drive Win8 Corsair Dual PSU - AX1200 and HX650 Open Case 
Other
Thee 16x Risers and One 1x Riser 
CPUMotherboardGraphicsRAM
i7 3930K 5Ghz Bench ASUS X79 Rampage IV Extreme 3x AMD 7970's w/ EK water blocks Samsung 16GB (4x4gb) 2400Mhz 10-12-12-31-1t @ 1... 
Hard DriveCoolingCoolingMonitor
128GB Samsung 830  RX360, RX240, EX360 XSPC Raystorm CPU Block QNIX QX2710 27" 2560x1440 @ 114hz 
KeyboardPowerCase
Corsair K90 Corsair AX760i Corsair 700D Modded w/ External Radiators 
  hide details  
Reply
 
4x r290's
(9 items)
 
3x 7970's
(16 items)
 
CPUMotherboardGraphicsGraphics
i7 3930K 4.8Ghz offset ASUS X79 Rampage IV Extreme GTX 780 with EK waterblock GTX 780 with EK waterblock 
GraphicsRAMHard DriveHard Drive
GTX 780 with EK waterblock  Samsung 16GB (4x4gb) 2400Mhz 10-12-12-31-1t @ 1... 256GB Samsung 950 Pro 256GB Samsung 840 Pro 
CoolingCoolingOSMonitor
RX360, EX360, EX360, and 480 Rad's XSPC Raystorm CPU Block Dual boot (other unnamed OS) and Win8 Pro QNIX QX2710 27" 2560x1440 @ 112hz 
KeyboardPowerCase
Corsair K90 Corsair AX1200 Corsair 700D Modded w/ External Radiators 
CPUMotherboardGraphicsRAM
Intel i5 3570K GA-Z77X-UD3H 4x R9 290's 8GB 1600Mhz 
Hard DriveOSPowerCase
1TB Hard Drive Win8 Corsair Dual PSU - AX1200 and HX650 Open Case 
Other
Thee 16x Risers and One 1x Riser 
CPUMotherboardGraphicsRAM
i7 3930K 5Ghz Bench ASUS X79 Rampage IV Extreme 3x AMD 7970's w/ EK water blocks Samsung 16GB (4x4gb) 2400Mhz 10-12-12-31-1t @ 1... 
Hard DriveCoolingCoolingMonitor
128GB Samsung 830  RX360, RX240, EX360 XSPC Raystorm CPU Block QNIX QX2710 27" 2560x1440 @ 114hz 
KeyboardPowerCase
Corsair K90 Corsair AX760i Corsair 700D Modded w/ External Radiators 
  hide details  
Reply
post #3655 of 9802
Quote:
Originally Posted by UNOE View Post

You didn't read my post, look what I said "VTT try 1.05v to 1.17 (you can go up to 1.25v) VCCSA 1.05 to 1.15 (You can go up to 1.20v)"
You don't want to run VTT that high change it now !!!!

Edit: You could kill your chip if you don't read carefully. 1.75v for VTT is terribly high.

wow sorry sir bigeyedsmiley.png REP+ for alert and thank you, i thought you meant its ok to go up to 1.25 for VTT and i made a mistake!
so i actually should keep the VTT and VCCSA both under 1.14 cuz even if i set it to 1.14 under the stress it will go up to 1.16-1.17 from what i see in my mobo, BTW is this ok for VTT and VCCSA to go up like than under stress test?
Void Ray
(31 items)
 
  
CPUMotherboardGraphicsGraphics
Intel Core i7 3930K Rampage IV Formula Zotac GTX 980 Reference Zotac GTX 980 Reference 
RAMHard DriveHard DriveHard Drive
Corsair Dominator GT Corsair Force GT Plextor M5 Pro Xtreme WD Caviar Green 
Hard DriveOptical DriveOptical DriveCooling
Toshiba SATA 6.0Gb Pioneer BDR-S07XLT Pioneer BDR-S07XLT XSPC Raystorm 
CoolingCoolingCoolingCooling
XSPC AX240 RAD XSPC RX120 RAD XSPC RX360 RAD XSPC GTX980 Razor Waterblock 
CoolingCoolingOSMonitor
XSPC GTX980 Razor Waterblock XSPC D5 Vario Windows 7 Ultimate x64 Asus VG-236H 3D 
MonitorMonitorKeyboardPower
Asus VG-236H 3D Asus VG-236H 3D Corsair K95 Chroma Enermax Revolution87+ Gold 1200W 
CaseMouseMouse PadAudio
Corsair 750D Razer Naga Epic Chroma Steelseries Ninjas in Pyjamas Pioneer VSX-520 Todoroki 
AudioOtherOther
Razer Kraken 7.1 Chroma Corsair M65 RGB Razer Orbweaver Chroma 
  hide details  
Reply
Void Ray
(31 items)
 
  
CPUMotherboardGraphicsGraphics
Intel Core i7 3930K Rampage IV Formula Zotac GTX 980 Reference Zotac GTX 980 Reference 
RAMHard DriveHard DriveHard Drive
Corsair Dominator GT Corsair Force GT Plextor M5 Pro Xtreme WD Caviar Green 
Hard DriveOptical DriveOptical DriveCooling
Toshiba SATA 6.0Gb Pioneer BDR-S07XLT Pioneer BDR-S07XLT XSPC Raystorm 
CoolingCoolingCoolingCooling
XSPC AX240 RAD XSPC RX120 RAD XSPC RX360 RAD XSPC GTX980 Razor Waterblock 
CoolingCoolingOSMonitor
XSPC GTX980 Razor Waterblock XSPC D5 Vario Windows 7 Ultimate x64 Asus VG-236H 3D 
MonitorMonitorKeyboardPower
Asus VG-236H 3D Asus VG-236H 3D Corsair K95 Chroma Enermax Revolution87+ Gold 1200W 
CaseMouseMouse PadAudio
Corsair 750D Razer Naga Epic Chroma Steelseries Ninjas in Pyjamas Pioneer VSX-520 Todoroki 
AudioOtherOther
Razer Kraken 7.1 Chroma Corsair M65 RGB Razer Orbweaver Chroma 
  hide details  
Reply
post #3656 of 9802
Quote:
Originally Posted by Void-Ray View Post

wow sorry sir bigeyedsmiley.png REP+ for alert and thank you, i thought you meant its ok to go up to 1.25 for VTT and i made a mistake!
so i actually should keep the VTT and VCCSA both under 1.14 cuz even if i set it to 1.14 under the stress it will go up to 1.16-1.17 from what i see in my mobo, BTW is this ok for VTT and VCCSA to go up like than under stress test?

1.25 is fine but above you said you used 1.75 your confusing me more now go back and reread your post and go back in bios make sure its 1.175 Just to clarify 1.25 or even 1.30 is some what safe anything over 1.3 is starts to get dangerous. 1.75 would kill your chip. But most likely you don't need more that 1.20v. You should be able to do 5.0ghz with less than 1.23v of VTT. I only need 1.14v

Edit : You understand right ? stock VTT is I think 1.05 so 1.20v would be 15% increase in voltage and 1.14 would be like 8% increase in voltage which 8% to 15% increase in voltage is safe for VTT. But you said 1.75 which would be 67% increase in voltage which is not safe.
Edited by UNOE - 1/28/13 at 1:29am
 
4x r290's
(9 items)
 
3x 7970's
(16 items)
 
CPUMotherboardGraphicsGraphics
i7 3930K 4.8Ghz offset ASUS X79 Rampage IV Extreme GTX 780 with EK waterblock GTX 780 with EK waterblock 
GraphicsRAMHard DriveHard Drive
GTX 780 with EK waterblock  Samsung 16GB (4x4gb) 2400Mhz 10-12-12-31-1t @ 1... 256GB Samsung 950 Pro 256GB Samsung 840 Pro 
CoolingCoolingOSMonitor
RX360, EX360, EX360, and 480 Rad's XSPC Raystorm CPU Block Dual boot (other unnamed OS) and Win8 Pro QNIX QX2710 27" 2560x1440 @ 112hz 
KeyboardPowerCase
Corsair K90 Corsair AX1200 Corsair 700D Modded w/ External Radiators 
CPUMotherboardGraphicsRAM
Intel i5 3570K GA-Z77X-UD3H 4x R9 290's 8GB 1600Mhz 
Hard DriveOSPowerCase
1TB Hard Drive Win8 Corsair Dual PSU - AX1200 and HX650 Open Case 
Other
Thee 16x Risers and One 1x Riser 
CPUMotherboardGraphicsRAM
i7 3930K 5Ghz Bench ASUS X79 Rampage IV Extreme 3x AMD 7970's w/ EK water blocks Samsung 16GB (4x4gb) 2400Mhz 10-12-12-31-1t @ 1... 
Hard DriveCoolingCoolingMonitor
128GB Samsung 830  RX360, RX240, EX360 XSPC Raystorm CPU Block QNIX QX2710 27" 2560x1440 @ 114hz 
KeyboardPowerCase
Corsair K90 Corsair AX760i Corsair 700D Modded w/ External Radiators 
  hide details  
Reply
 
4x r290's
(9 items)
 
3x 7970's
(16 items)
 
CPUMotherboardGraphicsGraphics
i7 3930K 4.8Ghz offset ASUS X79 Rampage IV Extreme GTX 780 with EK waterblock GTX 780 with EK waterblock 
GraphicsRAMHard DriveHard Drive
GTX 780 with EK waterblock  Samsung 16GB (4x4gb) 2400Mhz 10-12-12-31-1t @ 1... 256GB Samsung 950 Pro 256GB Samsung 840 Pro 
CoolingCoolingOSMonitor
RX360, EX360, EX360, and 480 Rad's XSPC Raystorm CPU Block Dual boot (other unnamed OS) and Win8 Pro QNIX QX2710 27" 2560x1440 @ 112hz 
KeyboardPowerCase
Corsair K90 Corsair AX1200 Corsair 700D Modded w/ External Radiators 
CPUMotherboardGraphicsRAM
Intel i5 3570K GA-Z77X-UD3H 4x R9 290's 8GB 1600Mhz 
Hard DriveOSPowerCase
1TB Hard Drive Win8 Corsair Dual PSU - AX1200 and HX650 Open Case 
Other
Thee 16x Risers and One 1x Riser 
CPUMotherboardGraphicsRAM
i7 3930K 5Ghz Bench ASUS X79 Rampage IV Extreme 3x AMD 7970's w/ EK water blocks Samsung 16GB (4x4gb) 2400Mhz 10-12-12-31-1t @ 1... 
Hard DriveCoolingCoolingMonitor
128GB Samsung 830  RX360, RX240, EX360 XSPC Raystorm CPU Block QNIX QX2710 27" 2560x1440 @ 114hz 
KeyboardPowerCase
Corsair K90 Corsair AX760i Corsair 700D Modded w/ External Radiators 
  hide details  
Reply
post #3657 of 9802
Clipboard.jpg 518k .jpg file
Quote:
Originally Posted by UNOE View Post

1.25 is fine but above you said you used 1.75 your confusing me more now go back and reread your post and go back in bios make sure its 1.175 Just to clarify 1.25 or even 1.30 is some what safe anything over 1.3 is starts to get dangerous. 1.75 would kill your chip. But most likely you don't need more that 1.20v. You should be able to do 5.0ghz with less than 1.23v of VTT. I only need 1.14v

damn im sorry sir i meant 1.175 biggrin.gif it was 1.175 and now i decreased it to 1.09 and the same for VCCSA just a little lower, and Vcore at 1.390 with offset mode. it seems lower than 1.380 will not work for me on 4500mhz, or should i do something? well i guess its better to give you some screenshots that would explain better than myself biggrin.gif
this is my config for now please take a look and thanks smile.gif
Void Ray
(31 items)
 
  
CPUMotherboardGraphicsGraphics
Intel Core i7 3930K Rampage IV Formula Zotac GTX 980 Reference Zotac GTX 980 Reference 
RAMHard DriveHard DriveHard Drive
Corsair Dominator GT Corsair Force GT Plextor M5 Pro Xtreme WD Caviar Green 
Hard DriveOptical DriveOptical DriveCooling
Toshiba SATA 6.0Gb Pioneer BDR-S07XLT Pioneer BDR-S07XLT XSPC Raystorm 
CoolingCoolingCoolingCooling
XSPC AX240 RAD XSPC RX120 RAD XSPC RX360 RAD XSPC GTX980 Razor Waterblock 
CoolingCoolingOSMonitor
XSPC GTX980 Razor Waterblock XSPC D5 Vario Windows 7 Ultimate x64 Asus VG-236H 3D 
MonitorMonitorKeyboardPower
Asus VG-236H 3D Asus VG-236H 3D Corsair K95 Chroma Enermax Revolution87+ Gold 1200W 
CaseMouseMouse PadAudio
Corsair 750D Razer Naga Epic Chroma Steelseries Ninjas in Pyjamas Pioneer VSX-520 Todoroki 
AudioOtherOther
Razer Kraken 7.1 Chroma Corsair M65 RGB Razer Orbweaver Chroma 
  hide details  
Reply
Void Ray
(31 items)
 
  
CPUMotherboardGraphicsGraphics
Intel Core i7 3930K Rampage IV Formula Zotac GTX 980 Reference Zotac GTX 980 Reference 
RAMHard DriveHard DriveHard Drive
Corsair Dominator GT Corsair Force GT Plextor M5 Pro Xtreme WD Caviar Green 
Hard DriveOptical DriveOptical DriveCooling
Toshiba SATA 6.0Gb Pioneer BDR-S07XLT Pioneer BDR-S07XLT XSPC Raystorm 
CoolingCoolingCoolingCooling
XSPC AX240 RAD XSPC RX120 RAD XSPC RX360 RAD XSPC GTX980 Razor Waterblock 
CoolingCoolingOSMonitor
XSPC GTX980 Razor Waterblock XSPC D5 Vario Windows 7 Ultimate x64 Asus VG-236H 3D 
MonitorMonitorKeyboardPower
Asus VG-236H 3D Asus VG-236H 3D Corsair K95 Chroma Enermax Revolution87+ Gold 1200W 
CaseMouseMouse PadAudio
Corsair 750D Razer Naga Epic Chroma Steelseries Ninjas in Pyjamas Pioneer VSX-520 Todoroki 
AudioOtherOther
Razer Kraken 7.1 Chroma Corsair M65 RGB Razer Orbweaver Chroma 
  hide details  
Reply
post #3658 of 9802
Quote:
Originally Posted by white118 View Post

ok have a bit of an issue here, not sure if its the motherboard, but honestly not sure what else it could be/where else to ask.

i noticed one of my ram sticks wasnt being picked up by windows. so i reseated all my dimms. then next time i booted up, it started in really low resolution and nvcp said no gpus where detected. i then checked device managaer, and both gpus(gtx 680s in sli) had a yellow sign and said they werent working and had a code 43(which i tried googling, but got me no where). i i tried the reseating the gpu's. after repeatedly messing around with them, they both work just fine if only one is plugged in. but if the other gpu is in the 4th pcie slot it wont work, even if the second gpu doesn't have power plugged in. any ideas whats going on?

Reseat your CPU and don't tighten the heatsink down too hard. Give it a shot and let us know. smile.gif
   
COOTER [HTPC]
(14 items)
 
CPUMotherboardGraphicsGraphics
Intel Core i7 5960X ASUS RAMPAGE V EXTREME/U3.1 MSI R9 290X LIGHTNING MSI R9 290X LIGHTNING 
GraphicsRAMHard DriveHard Drive
MSI R9 290X LIGHTNING Kingston HyperX Predator 16GB (4 x 4GB) DDR4 2666 Intel 400GB 750 Series NVMe PCIe (OS drive) Samsung 840 Pro Series 256GB (2 in RAID 0) 
Hard DriveOptical DriveOptical DriveCooling
Seagate Barracuda 3TB 7200RPM SATA3 64MB LG Super Multi Blu-ray Disc and HD DVD-ROM Drive LG GH24NS90B 24X SATA Internal Super Multi DVD ... CPU Cooler [Summer-Time] = Watercool HEATKILLER... 
CoolingCoolingCoolingCooling
CPU Cooler [Winter-Time] = Custom 300W ss phase... Hardware Labs Black Ice GTX 480 Radiator (4 x 1... Feser X-Changer Triple (3 x 120mm) Swiftech MCP655 (x2) 
CoolingCoolingCoolingCooling
Koolance RP-452X2 Dual 5.25" Reservoir EK MSI R9 290X Lightning - Full Cover VGA Water... EK MSI R9 290X Lightning - Full Cover VGA Water... EK MSI R9 290X Lightning - Full Cover VGA Water... 
OSMonitorKeyboardPower
Windows 10 Pro x64 (3) ASUS VG248QE 24-Inch Screen LED-lit Monitor Ducky Mini PC Power & Cooling Turbo-Cool 1200 
CaseMouseMouse PadAudio
Xigmatek Elysium [Black w/ Window] Razer Naga Hex MOBA Perixx DX-2000XXL Boston Acoustics MicroMediaSpeaker System 
AudioOther
Sennheiser PC 363D EVGA Supernova 1300G2 - 1300W PSU (second PSU) 
CPUMotherboardGraphicsRAM
Intel Core i7 3930k RAMPAGE IV EXTREME ASUS GTX 590 Samsung 30nm 4 x 4GB sticks 
Hard DriveHard DriveHard DriveOptical Drive
SAMSUNG 850 EVO 250GB 1TB WD Green 300GB WD Velociraptor (4 in RAID 0) LG GH24NS90B 24X SATA Internal Super Multi DVD ... 
Optical DriveCoolingOSMonitor
LG GH24NS90B 24X SATA Internal Super Multi DVD ... Corsair H110i GT Windows 10 Pro x64 LG 24" Flatron 
KeyboardPowerCaseMouse
Ducky Shine II - w/ Brown Cherry MX w/ English ... Corsair TX650 Nanoxia Deep Silence 2 RAZER DeathAdder 
Mouse PadAudioAudio
X Trac Ripper HT| OMEGA eCLARO  TRITTON AX Pro Dolby Digital 5.1 True Surround ... 
CPUMotherboardGraphicsRAM
AMD A6-3650 ASUS F1A75-M-PRO R2.0 EVGA GeForce GTX 960 4GB Superclocked Samsung 30nm 2 x 4GB sticks 
Hard DriveHard DriveOptical DriveCooling
120GB Samsung 840 Western Digital Red 3TB SATA3 64MB Cache 3.5in ... LG Super Multi Blu-ray Disc and HD DVD-ROM Drive Cooler Master GeminII M4 - CPU Cooler 
CoolingOSMonitorKeyboard
Noctua NF-R8 80mm Fans Win7 SP1 64bit Visio 50" Plasma Logitech Mini Controller for Logitech Revue and... 
PowerCase
PC Power & Cooling Silencer Mk III 400W ATX Mod... Silverstone Sugo 
  hide details  
Reply
   
COOTER [HTPC]
(14 items)
 
CPUMotherboardGraphicsGraphics
Intel Core i7 5960X ASUS RAMPAGE V EXTREME/U3.1 MSI R9 290X LIGHTNING MSI R9 290X LIGHTNING 
GraphicsRAMHard DriveHard Drive
MSI R9 290X LIGHTNING Kingston HyperX Predator 16GB (4 x 4GB) DDR4 2666 Intel 400GB 750 Series NVMe PCIe (OS drive) Samsung 840 Pro Series 256GB (2 in RAID 0) 
Hard DriveOptical DriveOptical DriveCooling
Seagate Barracuda 3TB 7200RPM SATA3 64MB LG Super Multi Blu-ray Disc and HD DVD-ROM Drive LG GH24NS90B 24X SATA Internal Super Multi DVD ... CPU Cooler [Summer-Time] = Watercool HEATKILLER... 
CoolingCoolingCoolingCooling
CPU Cooler [Winter-Time] = Custom 300W ss phase... Hardware Labs Black Ice GTX 480 Radiator (4 x 1... Feser X-Changer Triple (3 x 120mm) Swiftech MCP655 (x2) 
CoolingCoolingCoolingCooling
Koolance RP-452X2 Dual 5.25" Reservoir EK MSI R9 290X Lightning - Full Cover VGA Water... EK MSI R9 290X Lightning - Full Cover VGA Water... EK MSI R9 290X Lightning - Full Cover VGA Water... 
OSMonitorKeyboardPower
Windows 10 Pro x64 (3) ASUS VG248QE 24-Inch Screen LED-lit Monitor Ducky Mini PC Power & Cooling Turbo-Cool 1200 
CaseMouseMouse PadAudio
Xigmatek Elysium [Black w/ Window] Razer Naga Hex MOBA Perixx DX-2000XXL Boston Acoustics MicroMediaSpeaker System 
AudioOther
Sennheiser PC 363D EVGA Supernova 1300G2 - 1300W PSU (second PSU) 
CPUMotherboardGraphicsRAM
Intel Core i7 3930k RAMPAGE IV EXTREME ASUS GTX 590 Samsung 30nm 4 x 4GB sticks 
Hard DriveHard DriveHard DriveOptical Drive
SAMSUNG 850 EVO 250GB 1TB WD Green 300GB WD Velociraptor (4 in RAID 0) LG GH24NS90B 24X SATA Internal Super Multi DVD ... 
Optical DriveCoolingOSMonitor
LG GH24NS90B 24X SATA Internal Super Multi DVD ... Corsair H110i GT Windows 10 Pro x64 LG 24" Flatron 
KeyboardPowerCaseMouse
Ducky Shine II - w/ Brown Cherry MX w/ English ... Corsair TX650 Nanoxia Deep Silence 2 RAZER DeathAdder 
Mouse PadAudioAudio
X Trac Ripper HT| OMEGA eCLARO  TRITTON AX Pro Dolby Digital 5.1 True Surround ... 
CPUMotherboardGraphicsRAM
AMD A6-3650 ASUS F1A75-M-PRO R2.0 EVGA GeForce GTX 960 4GB Superclocked Samsung 30nm 2 x 4GB sticks 
Hard DriveHard DriveOptical DriveCooling
120GB Samsung 840 Western Digital Red 3TB SATA3 64MB Cache 3.5in ... LG Super Multi Blu-ray Disc and HD DVD-ROM Drive Cooler Master GeminII M4 - CPU Cooler 
CoolingOSMonitorKeyboard
Noctua NF-R8 80mm Fans Win7 SP1 64bit Visio 50" Plasma Logitech Mini Controller for Logitech Revue and... 
PowerCase
PC Power & Cooling Silencer Mk III 400W ATX Mod... Silverstone Sugo 
  hide details  
Reply
post #3659 of 9802
Quote:
Originally Posted by white118 View Post

ok have a bit of an issue here, not sure if its the motherboard, but honestly not sure what else it could be/where else to ask.

i noticed one of my ram sticks wasnt being picked up by windows. so i reseated all my dimms. then next time i booted up, it started in really low resolution and nvcp said no gpus where detected. i then checked device managaer, and both gpus(gtx 680s in sli) had a yellow sign and said they werent working and had a code 43(which i tried googling, but got me no where). i i tried the reseating the gpu's. after repeatedly messing around with them, they both work just fine if only one is plugged in. but if the other gpu is in the 4th pcie slot it wont work, even if the second gpu doesn't have power plugged in. any ideas whats going on?

I had this issue... Turned out I had to get a higher watt psu.. Went to a 1200 and all problems went away..
post #3660 of 9802
Quote:
Originally Posted by white118 View Post

ok have a bit of an issue here, not sure if its the motherboard, but honestly not sure what else it could be/where else to ask.

i noticed one of my ram sticks wasnt being picked up by windows. so i reseated all my dimms. then next time i booted up, it started in really low resolution and nvcp said no gpus where detected. i then checked device managaer, and both gpus(gtx 680s in sli) had a yellow sign and said they werent working and had a code 43(which i tried googling, but got me no where). i i tried the reseating the gpu's. after repeatedly messing around with them, they both work just fine if only one is plugged in. but if the other gpu is in the 4th pcie slot it wont work, even if the second gpu doesn't have power plugged in. any ideas whats going on?
one question what is the version of the driver? i had the very same problem with two 680GTX when i installed 310.90 so if you have this version installed just uninstall it and go back to 310.70 it did helped me cuz it was a problem with that driver
Void Ray
(31 items)
 
  
CPUMotherboardGraphicsGraphics
Intel Core i7 3930K Rampage IV Formula Zotac GTX 980 Reference Zotac GTX 980 Reference 
RAMHard DriveHard DriveHard Drive
Corsair Dominator GT Corsair Force GT Plextor M5 Pro Xtreme WD Caviar Green 
Hard DriveOptical DriveOptical DriveCooling
Toshiba SATA 6.0Gb Pioneer BDR-S07XLT Pioneer BDR-S07XLT XSPC Raystorm 
CoolingCoolingCoolingCooling
XSPC AX240 RAD XSPC RX120 RAD XSPC RX360 RAD XSPC GTX980 Razor Waterblock 
CoolingCoolingOSMonitor
XSPC GTX980 Razor Waterblock XSPC D5 Vario Windows 7 Ultimate x64 Asus VG-236H 3D 
MonitorMonitorKeyboardPower
Asus VG-236H 3D Asus VG-236H 3D Corsair K95 Chroma Enermax Revolution87+ Gold 1200W 
CaseMouseMouse PadAudio
Corsair 750D Razer Naga Epic Chroma Steelseries Ninjas in Pyjamas Pioneer VSX-520 Todoroki 
AudioOtherOther
Razer Kraken 7.1 Chroma Corsair M65 RGB Razer Orbweaver Chroma 
  hide details  
Reply
Void Ray
(31 items)
 
  
CPUMotherboardGraphicsGraphics
Intel Core i7 3930K Rampage IV Formula Zotac GTX 980 Reference Zotac GTX 980 Reference 
RAMHard DriveHard DriveHard Drive
Corsair Dominator GT Corsair Force GT Plextor M5 Pro Xtreme WD Caviar Green 
Hard DriveOptical DriveOptical DriveCooling
Toshiba SATA 6.0Gb Pioneer BDR-S07XLT Pioneer BDR-S07XLT XSPC Raystorm 
CoolingCoolingCoolingCooling
XSPC AX240 RAD XSPC RX120 RAD XSPC RX360 RAD XSPC GTX980 Razor Waterblock 
CoolingCoolingOSMonitor
XSPC GTX980 Razor Waterblock XSPC D5 Vario Windows 7 Ultimate x64 Asus VG-236H 3D 
MonitorMonitorKeyboardPower
Asus VG-236H 3D Asus VG-236H 3D Corsair K95 Chroma Enermax Revolution87+ Gold 1200W 
CaseMouseMouse PadAudio
Corsair 750D Razer Naga Epic Chroma Steelseries Ninjas in Pyjamas Pioneer VSX-520 Todoroki 
AudioOtherOther
Razer Kraken 7.1 Chroma Corsair M65 RGB Razer Orbweaver Chroma 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel Motherboards
Overclock.net › Forums › Intel › Intel Motherboards › [Official] ASUS ROG Rampage IV X79 Owner's Club