Overclock.net › Forums › Intel › Intel Motherboards › 980x and RE III Overclocking Help
New Posts  All Forums:Forum Nav:

980x and RE III Overclocking Help

post #1 of 3
Thread Starter 
Good Day Chaps,

This sucker has been bone stock since the day I put it together, unfortunately been busy and havent really worked on it. So im looking to hit a good 4.0-4.2 range w/o killin my chip.

Settings: all at default, except for RAM set for 1600@1.6v, with cas8 settings.

Thanks in advance!
post #2 of 3
Quote:
Originally Posted by DarkstarX10a View Post
Good Day Chaps,

This sucker has been bone stock since the day I put it together, unfortunately been busy and havent really worked on it. So im looking to hit a good 4.0-4.2 range w/o killin my chip.

Settings: all at default, except for RAM set for 1600@1.6v, with cas8 settings.

Thanks in advance!
Option 1:

133 BCLK x CPU Multi 31 = 4.2 GHz
Vcore 1.350~1.375v.

Option 2:

200 BCLK x CPU Multi 21 = 4.2 GHz
Vcore 1.350~1.375v.
QPI/Vtt ~ 1.275v
Memory Multiplier 8.

There is no need to change other voltages in option 1, but needs to run memory test since changing baseclock and memory multiplier and adjust timings.

Both options, max full load 70-80°C.
ケンジ
(16 items)
 
  
CPUCPUMotherboardGraphics
i7-3960X i7-980X GA-X79-UD7 / GA-X58A-UD9 7970 + 465 
GraphicsRAMRAMHard Drive
2x 6990 + 580 16GB 2133 MHz 24GB 2000 MHz 120GB x 2 RAID0 
Hard DriveHard DriveCoolingCooling
120GB x 4 RAID0 Raptor 300GB x 2 RAID0 CPU-370 CPU-370 
CoolingCoolingOSPower
VID-AR699 EK FB X58A-UD9 Win 7 Ultimate x64 1500W / 1250W+1200W 
  hide details  
Reply
ケンジ
(16 items)
 
  
CPUCPUMotherboardGraphics
i7-3960X i7-980X GA-X79-UD7 / GA-X58A-UD9 7970 + 465 
GraphicsRAMRAMHard Drive
2x 6990 + 580 16GB 2133 MHz 24GB 2000 MHz 120GB x 2 RAID0 
Hard DriveHard DriveCoolingCooling
120GB x 4 RAID0 Raptor 300GB x 2 RAID0 CPU-370 CPU-370 
CoolingCoolingOSPower
VID-AR699 EK FB X58A-UD9 Win 7 Ultimate x64 1500W / 1250W+1200W 
  hide details  
Reply
post #3 of 3
My 4.4GHz settings are below. You will need to change the DRAM timing settings from my ram to your ram. Once you are sure it is stable you can bump the QPI Link Data Rate to 7233MT/s. When I did this I had to raise my QPI/DRAM Core Voltage to 1.37500 in order to get it to pass the OCCT CPU 1 hour auto stress test.

Overclock Settings June 28, 2011 (4.44GHz) BIOS 1301
LN2 Mode: Disabled
QPI Loadline Calibration: Disabled
AI Overclock Tuner: Manual
OC From CPU Level Up: Auto
2D Performance Booster: Disabled
CPU Ratio Setting: 27
CPU Turbo Power Limit: Disabled
BCLK Frequency: 164
PCIE Frequency: 100
DRAM Frequency: DDR3 1644MHz
UCLK Frequency: 3287MHz
QPI Link Data Rate: 5919MT/s
Memory Recheck: Disabled
Memory Configuration Protect: Disabled

DRAM Timing Control
1st Information :
CAS# Latency: 6
DRAM RAS# to CAS# Delay: 7
DRAM RAS# PRE Time: 6
DRAM RAS# ACT Time: 18
2nd Information :
DRAM Timing Mode: 1N

CPU Differential Amplitude: Auto
CPU Clock Skew: Auto
IOH Clock Skew: Auto
Digi+ Pwr Mode: T-Balanced
PWM Volt. Control: Auto
Load-Line Calibration: Full Calibration
CPU Voltage OCP: Enabled
CPU PWM Frequency: Auto
Extreme OV: Disabled
Extreme OC: Auto
CPU Voltage: 1.36875
CPU PLL Voltage: 1.82850
QPI/DRAM Core Voltage: 1.36875
DRAM Bus Voltage: 1.66950
IOH Voltage (NB): 1.20575
IOH PCIE Voltage (NB): Auto (1.51)
ICH Voltage (SB): 1.20575
ICH PCIE Voltage (SB): Auto
CPU Spread Spectrum: Disabled
PCI Spread Spectrum: Disabled

Advance CPU Settings
CPU Ratio Setting: 27
C1E Suppport: Disabled
Hardware Prefetcher: Enabled
Adjacent Cache Line Prefetch: Enabled
MPS and ACPI MADT Ordering: Modern Ordering
Intel® Virtualization Tech: Disabled
CPU TM Function: Disabled
Execute Disable Bit: Disabled
Intel HT Techology: Disabled
Active Processor Cores: All
A20M: Disabled
Intel SpeedStep Tech: Disabled
Intel C-STATE Tech: Disabled

Advanced Menu: PCIPnP
PNP OS = Yes
My System
(14 items)
 
  
CPUMotherboardGraphicsRAM
4770K @ 4.7GHz / 4400MHz Asus Sabertooth Z87 Gigabyte GTX 780 OC 8GB G.Skill Trident X 9-11-11-31-1T @ 2400MHz 
Hard DriveOptical DriveCoolingOS
OS SSD 840 Pro 256GB / FSX SSD 840 Pro 256GB LG DVD Thermalright SB-E x2 Win7 Ult 64b 
MonitorKeyboardPowerCase
Viewsonic VP2655wb 25.5" IPS LCD Logitech Wireless EX1110 w/Mouse Corsair AX860i CM HAF-X 
  hide details  
Reply
My System
(14 items)
 
  
CPUMotherboardGraphicsRAM
4770K @ 4.7GHz / 4400MHz Asus Sabertooth Z87 Gigabyte GTX 780 OC 8GB G.Skill Trident X 9-11-11-31-1T @ 2400MHz 
Hard DriveOptical DriveCoolingOS
OS SSD 840 Pro 256GB / FSX SSD 840 Pro 256GB LG DVD Thermalright SB-E x2 Win7 Ult 64b 
MonitorKeyboardPowerCase
Viewsonic VP2655wb 25.5" IPS LCD Logitech Wireless EX1110 w/Mouse Corsair AX860i CM HAF-X 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel Motherboards
Overclock.net › Forums › Intel › Intel Motherboards › 980x and RE III Overclocking Help