Overclock.net › Forums › Intel › Intel CPUs › 2600k the temps are too damn high
New Posts  All Forums:Forum Nav:

2600k the temps are too damn high

post #1 of 27
Thread Starter 
ok, here's my set up:
i7 2600k
Coolermaster hyper N 520
Biostar tz68a+

I'm turbo OC'ing with multiplier set to 45 for each core and BLCK set to 101
Vcore set to 1.33
Loadline is disabled (if I enable loadline, I get lower temps but I get throttled to x38)
cpu core current max: 120
Other two power settings at 120w

System appears to be stable after 2 hours of prime95 small FFT testing

Coretemp is reporting temps in the mid Eighties! Any thoughts as to why my heat is so high?
Main System
(13 items)
 
  
Reply
Main System
(13 items)
 
  
Reply
post #2 of 27
Have you jumped straight to that speed before testing anything? An overclock preset is never a good overclock (according to me and my experience)

If so, you probably have many voltage that are set to auto and they are probably overvolting.
Quad Damage
(24 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7 4930k @ 4.6Ghz Asus Rampage IV Extreme (Koolance Full WB) 2 x GTX 1080ti FE in SLI (EK WATERBLOCK) Corsair Dominator GT 2133 MHz (16GB) 
Hard DriveHard DriveHard DriveHard Drive
3 TB Seagate OCZ Vertex 4 256GB Crucial M4 128GB ADATA SX900 128GB 
CoolingCoolingCoolingCooling
RIVE Koolance Waterblock (VRM and PCH) Feser X-Changer 360 Feser X-Changer 240 Feser X-Changer 480 
CoolingCoolingCoolingOS
WaterCool MoRA3 Pro with Gentle Typhoon 3 x MCP 655 pumps (With EK top...all serial) 2 x EK FC 1080ti Blocks Windows 7 Ultimate x64 
MonitorMonitorKeyboardPower
Asus ROG Swift PG348Q (3440x1440 @100hz) CrossOver 27Q Led-P Logitech G15 EVGA SuperNova 1600T2 (Titanium) 
CaseMouseMouse PadAudio
Corsair Obsidian Heavily Modded Logitech G700 RocketFish Speed/Control M-audio AV-40 (Logitech G-35) 
  hide details  
Reply
Quad Damage
(24 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7 4930k @ 4.6Ghz Asus Rampage IV Extreme (Koolance Full WB) 2 x GTX 1080ti FE in SLI (EK WATERBLOCK) Corsair Dominator GT 2133 MHz (16GB) 
Hard DriveHard DriveHard DriveHard Drive
3 TB Seagate OCZ Vertex 4 256GB Crucial M4 128GB ADATA SX900 128GB 
CoolingCoolingCoolingCooling
RIVE Koolance Waterblock (VRM and PCH) Feser X-Changer 360 Feser X-Changer 240 Feser X-Changer 480 
CoolingCoolingCoolingOS
WaterCool MoRA3 Pro with Gentle Typhoon 3 x MCP 655 pumps (With EK top...all serial) 2 x EK FC 1080ti Blocks Windows 7 Ultimate x64 
MonitorMonitorKeyboardPower
Asus ROG Swift PG348Q (3440x1440 @100hz) CrossOver 27Q Led-P Logitech G15 EVGA SuperNova 1600T2 (Titanium) 
CaseMouseMouse PadAudio
Corsair Obsidian Heavily Modded Logitech G700 RocketFish Speed/Control M-audio AV-40 (Logitech G-35) 
  hide details  
Reply
post #3 of 27
The fan is hooked onto the heatsink correctly? The cooler is placed onto the CPU correctly? Every pin in connected to the motherboard? How about the thermal paste. When you put it on the CPU, was there a thin layer covering up the whole cpu or was it like clobs of it, I guess you can say, on the cpu?
    
CPUMotherboardGraphicsRAM
[ Q6600 2.4GHz ] [ ASUS P5K ] [ Radeon HD5830 ] [ 4GB 800MHz ] 
Hard DriveOptical DriveOSMonitor
[ WD 500GB SATA ] [ DVD Burner/Reader 16x ] [ W7 Ultimate x64 ] [ Viewsonic 19" ] 
KeyboardPowerCaseMouse
Microsoft [ 600W ] [ Antec 900 ] Microsoft 
Mouse Pad
Desk 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
[ Q6600 2.4GHz ] [ ASUS P5K ] [ Radeon HD5830 ] [ 4GB 800MHz ] 
Hard DriveOptical DriveOSMonitor
[ WD 500GB SATA ] [ DVD Burner/Reader 16x ] [ W7 Ultimate x64 ] [ Viewsonic 19" ] 
KeyboardPowerCaseMouse
Microsoft [ 600W ] [ Antec 900 ] Microsoft 
Mouse Pad
Desk 
  hide details  
Reply
post #4 of 27
i believe that a little to much voltage for that speed
post #5 of 27
Thread Starter 
Fan is firmly in place, I applied thermal paste as I normally do, I.E. pour on a dollop and then smoothed it over the whole top of the chip using a stiff business card. I'm assuming every pin is connected to the motherboard, as performance has been on par with other 2600k baselines.

I worked my way through a couple 101 and 124 BSOD's to get to this OC, so it's not a preset, as far as I can tell. It feels fast and there are no glitches as of yet, it's just the heat that has me worried.
Main System
(13 items)
 
  
Reply
Main System
(13 items)
 
  
Reply
post #6 of 27
How are the ambient temperatures?
i7 Sandy
(8 items)
 
Skylake Pentium
(8 items)
 
 
CPUMotherboardGraphicsRAM
i7-2600K ASRock Z75 Pro3 GTX 970 16GB 
Hard DriveOSMonitorPower
250GB Samsung 850 Evo WinXP Pro / Win7 Pro 1080p 60Hz Thermaltake Smart M850W 
CPUMotherboardGraphicsRAM
Pentium G4400 ASRock H110M-HDV GTX 550 Ti 8GB (2x4) 
Hard DriveOSPowerOther
250GB SSD Windows 7 500W 300Mbps WLAN 
  hide details  
Reply
i7 Sandy
(8 items)
 
Skylake Pentium
(8 items)
 
 
CPUMotherboardGraphicsRAM
i7-2600K ASRock Z75 Pro3 GTX 970 16GB 
Hard DriveOSMonitorPower
250GB Samsung 850 Evo WinXP Pro / Win7 Pro 1080p 60Hz Thermaltake Smart M850W 
CPUMotherboardGraphicsRAM
Pentium G4400 ASRock H110M-HDV GTX 550 Ti 8GB (2x4) 
Hard DriveOSPowerOther
250GB SSD Windows 7 500W 300Mbps WLAN 
  hide details  
Reply
post #7 of 27
Then I have a feeling it is a vcore problem. Could possibly be too high. You should slowly lower the volts, by the smallest increments and see if the temps lower.
    
CPUMotherboardGraphicsRAM
[ Q6600 2.4GHz ] [ ASUS P5K ] [ Radeon HD5830 ] [ 4GB 800MHz ] 
Hard DriveOptical DriveOSMonitor
[ WD 500GB SATA ] [ DVD Burner/Reader 16x ] [ W7 Ultimate x64 ] [ Viewsonic 19" ] 
KeyboardPowerCaseMouse
Microsoft [ 600W ] [ Antec 900 ] Microsoft 
Mouse Pad
Desk 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
[ Q6600 2.4GHz ] [ ASUS P5K ] [ Radeon HD5830 ] [ 4GB 800MHz ] 
Hard DriveOptical DriveOSMonitor
[ WD 500GB SATA ] [ DVD Burner/Reader 16x ] [ W7 Ultimate x64 ] [ Viewsonic 19" ] 
KeyboardPowerCaseMouse
Microsoft [ 600W ] [ Antec 900 ] Microsoft 
Mouse Pad
Desk 
  hide details  
Reply
post #8 of 27
Thread Starter 
ambient temps are ~67
Main System
(13 items)
 
  
Reply
Main System
(13 items)
 
  
Reply
post #9 of 27
Thread Starter 
running another prime test right now at 1.31, max temps already reported at 82 CPUid is reporting 1.32v even though it's set at 1.31 in bios.
Main System
(13 items)
 
  
Reply
Main System
(13 items)
 
  
Reply
post #10 of 27
vcore is NOT LIKELY too high, you're right in range with the majority of chips.

You can lower temps by disabling hyperthreading, thereby losing the main advantage of the 2600K over a 2500K. Expect ~10-12C at load - that's the difference between my 2500K and 2600K at 4.8.

Otherwise, double check your cooler seating & thermal compound (not too much!) but I'd say you want a better cooler.
The Latest
(14 items)
 
  
CPUMotherboardGraphicsRAM
2600K P8Z68-V Pro Gen3 EVGA GTX580 SSC 8G Patriot PC3-15000 
Hard DriveCoolingOSMonitor
2@WD Caviar Black 1TB Corsair H80 7/64 VG236 120Hz 
PowerCase
AX850 T600 
  hide details  
Reply
The Latest
(14 items)
 
  
CPUMotherboardGraphicsRAM
2600K P8Z68-V Pro Gen3 EVGA GTX580 SSC 8G Patriot PC3-15000 
Hard DriveCoolingOSMonitor
2@WD Caviar Black 1TB Corsair H80 7/64 VG236 120Hz 
PowerCase
AX850 T600 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › 2600k the temps are too damn high