Overclock.net › Forums › Components › Power Supplies › Corsair AX850 HELP
New Posts  All Forums:Forum Nav:

Corsair AX850 HELP - Page 3

post #21 of 37
Thread Starter 
I have everything connected properly and right now the problem is resolved i think so far no restarts on stock voltage and stock clock i think it might have been my old oc profile that causing it to restart...Can anyone tell me if my oroginal oc 45 ratio and vcore 1.32 was stable with my 1000w psu but can it be unstable with my new ax850? im a noob sorry...
Monster X99 Build
(19 items)
 
Workstation
(14 items)
 
 
CPUMotherboardGraphicsRAM
Intel Xeon W3520  X58 Chipset PNY Nvidia Quadro 4000 15GB ECC DDR3  
Hard DriveHard DriveCoolingOS
Seagate Barracuda 250GB NCQ Western Digital Caviar Black 640GB Stock Windows 7 Professional x64 
MonitorKeyboardPowerCase
Dell U2711 Stock 475W 80 Plus Bronze HP 
MouseAudio
Stock Realtek 
  hide details  
Reply
Monster X99 Build
(19 items)
 
Workstation
(14 items)
 
 
CPUMotherboardGraphicsRAM
Intel Xeon W3520  X58 Chipset PNY Nvidia Quadro 4000 15GB ECC DDR3  
Hard DriveHard DriveCoolingOS
Seagate Barracuda 250GB NCQ Western Digital Caviar Black 640GB Stock Windows 7 Professional x64 
MonitorKeyboardPowerCase
Dell U2711 Stock 475W 80 Plus Bronze HP 
MouseAudio
Stock Realtek 
  hide details  
Reply
post #22 of 37
Thread Starter 
Quote:
Originally Posted by firestorm1 View Post
hopefully this helps.

btw thx for the diagram at first it was quite confusing...I didnt plug the second part of the 24 pin and tried to start it lol but found out you need to plug that in but right now i ran prime under stock setting and no restarts so i have to start my overclock from scratch again...
Monster X99 Build
(19 items)
 
Workstation
(14 items)
 
 
CPUMotherboardGraphicsRAM
Intel Xeon W3520  X58 Chipset PNY Nvidia Quadro 4000 15GB ECC DDR3  
Hard DriveHard DriveCoolingOS
Seagate Barracuda 250GB NCQ Western Digital Caviar Black 640GB Stock Windows 7 Professional x64 
MonitorKeyboardPowerCase
Dell U2711 Stock 475W 80 Plus Bronze HP 
MouseAudio
Stock Realtek 
  hide details  
Reply
Monster X99 Build
(19 items)
 
Workstation
(14 items)
 
 
CPUMotherboardGraphicsRAM
Intel Xeon W3520  X58 Chipset PNY Nvidia Quadro 4000 15GB ECC DDR3  
Hard DriveHard DriveCoolingOS
Seagate Barracuda 250GB NCQ Western Digital Caviar Black 640GB Stock Windows 7 Professional x64 
MonitorKeyboardPowerCase
Dell U2711 Stock 475W 80 Plus Bronze HP 
MouseAudio
Stock Realtek 
  hide details  
Reply
post #23 of 37
yea i never get these psu's. why not just put the 24 pin on one section instead of breaking it up. the ax1200 is the same way.
My Rig
(15 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7 2600k @ 4.2ghz Asus Maximus IV Extreme-Z EVGA 580 Classified Ultra 4x 4GB G.Skill Sniper Series @ 1600mhz 
Hard DriveHard DriveOptical DriveCooling
180GB Corsair Force GT 4x 2Tb Western Digital Caviar Black Pioneer BDR-206MBK Thermalright Silver Arrow 
OSMonitorKeyboardPower
Win7 Ultimate 64bit Asus VK278Q Razer BlackWidow Ultimate OCZ ZX 850w 
CaseMouseAudio
DimasTech Bench Table Easy Dual V2.5 Razer DeathAdder Logitech G35 
  hide details  
Reply
My Rig
(15 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7 2600k @ 4.2ghz Asus Maximus IV Extreme-Z EVGA 580 Classified Ultra 4x 4GB G.Skill Sniper Series @ 1600mhz 
Hard DriveHard DriveOptical DriveCooling
180GB Corsair Force GT 4x 2Tb Western Digital Caviar Black Pioneer BDR-206MBK Thermalright Silver Arrow 
OSMonitorKeyboardPower
Win7 Ultimate 64bit Asus VK278Q Razer BlackWidow Ultimate OCZ ZX 850w 
CaseMouseAudio
DimasTech Bench Table Easy Dual V2.5 Razer DeathAdder Logitech G35 
  hide details  
Reply
post #24 of 37
Thread Starter 
Does anyone know if different psu can handle oc differently like my old psu handle 4.5 1.32vcore but.its.not stable with my new.one my old one 1000w
Monster X99 Build
(19 items)
 
Workstation
(14 items)
 
 
CPUMotherboardGraphicsRAM
Intel Xeon W3520  X58 Chipset PNY Nvidia Quadro 4000 15GB ECC DDR3  
Hard DriveHard DriveCoolingOS
Seagate Barracuda 250GB NCQ Western Digital Caviar Black 640GB Stock Windows 7 Professional x64 
MonitorKeyboardPowerCase
Dell U2711 Stock 475W 80 Plus Bronze HP 
MouseAudio
Stock Realtek 
  hide details  
Reply
Monster X99 Build
(19 items)
 
Workstation
(14 items)
 
 
CPUMotherboardGraphicsRAM
Intel Xeon W3520  X58 Chipset PNY Nvidia Quadro 4000 15GB ECC DDR3  
Hard DriveHard DriveCoolingOS
Seagate Barracuda 250GB NCQ Western Digital Caviar Black 640GB Stock Windows 7 Professional x64 
MonitorKeyboardPowerCase
Dell U2711 Stock 475W 80 Plus Bronze HP 
MouseAudio
Stock Realtek 
  hide details  
Reply
post #25 of 37
Software voltage reading are not always that accurate, the only way to be sure would be to use a voltmeter, try putting your vcore up one notch.
Dark Armour
(20 items)
 
  
CPUMotherboardGraphicsRAM
2600K Asus P67 Pro MSI 7970 OC G.Skill 2133 
Hard DriveOptical DriveCoolingCooling
Crucial M4 + Samsung Spinpoint  Samsung BluRay Combo XSPC Rasa water block XSPC RX360 radiator 
CoolingCoolingOSMonitor
Black Ice SR1-240 radiator Lamptron FC2 6 channel fan controller Windows 7 x64 24" 1920x1200 + 42" 1080p 
PowerCaseMouseMouse Pad
Corsair AX850 Armor+ MX-518 Razer ExactMat 
AudioAudioOther
X-Fi Sony STR-DA2400ES Onkyo SKSHT528 
  hide details  
Reply
Dark Armour
(20 items)
 
  
CPUMotherboardGraphicsRAM
2600K Asus P67 Pro MSI 7970 OC G.Skill 2133 
Hard DriveOptical DriveCoolingCooling
Crucial M4 + Samsung Spinpoint  Samsung BluRay Combo XSPC Rasa water block XSPC RX360 radiator 
CoolingCoolingOSMonitor
Black Ice SR1-240 radiator Lamptron FC2 6 channel fan controller Windows 7 x64 24" 1920x1200 + 42" 1080p 
PowerCaseMouseMouse Pad
Corsair AX850 Armor+ MX-518 Razer ExactMat 
AudioAudioOther
X-Fi Sony STR-DA2400ES Onkyo SKSHT528 
  hide details  
Reply
post #26 of 37
Thread Starter 
I used the same setting as I did with my old psu it was stable with my 1000w with 1.32v but with my 850 it would restart after prime95 start for 10min..
Monster X99 Build
(19 items)
 
Workstation
(14 items)
 
 
CPUMotherboardGraphicsRAM
Intel Xeon W3520  X58 Chipset PNY Nvidia Quadro 4000 15GB ECC DDR3  
Hard DriveHard DriveCoolingOS
Seagate Barracuda 250GB NCQ Western Digital Caviar Black 640GB Stock Windows 7 Professional x64 
MonitorKeyboardPowerCase
Dell U2711 Stock 475W 80 Plus Bronze HP 
MouseAudio
Stock Realtek 
  hide details  
Reply
Monster X99 Build
(19 items)
 
Workstation
(14 items)
 
 
CPUMotherboardGraphicsRAM
Intel Xeon W3520  X58 Chipset PNY Nvidia Quadro 4000 15GB ECC DDR3  
Hard DriveHard DriveCoolingOS
Seagate Barracuda 250GB NCQ Western Digital Caviar Black 640GB Stock Windows 7 Professional x64 
MonitorKeyboardPowerCase
Dell U2711 Stock 475W 80 Plus Bronze HP 
MouseAudio
Stock Realtek 
  hide details  
Reply
post #27 of 37
Quote:
Originally Posted by 2slick4u View Post
I used the same setting as I did with my old psu it was stable with my 1000w with 1.32v but with my 850 it would restart after prime95 start for 10min..
there's no guarantee both psu are supplying the same voltage even though you get a software reading of 1.32v. Hypothetically speaking It could be that the old psu was actually supplying 1.33v and the new one is supplying 1.31v but both are being read as 1.32v by whatever software/motherboard reading you are getting.
Dark Armour
(20 items)
 
  
CPUMotherboardGraphicsRAM
2600K Asus P67 Pro MSI 7970 OC G.Skill 2133 
Hard DriveOptical DriveCoolingCooling
Crucial M4 + Samsung Spinpoint  Samsung BluRay Combo XSPC Rasa water block XSPC RX360 radiator 
CoolingCoolingOSMonitor
Black Ice SR1-240 radiator Lamptron FC2 6 channel fan controller Windows 7 x64 24" 1920x1200 + 42" 1080p 
PowerCaseMouseMouse Pad
Corsair AX850 Armor+ MX-518 Razer ExactMat 
AudioAudioOther
X-Fi Sony STR-DA2400ES Onkyo SKSHT528 
  hide details  
Reply
Dark Armour
(20 items)
 
  
CPUMotherboardGraphicsRAM
2600K Asus P67 Pro MSI 7970 OC G.Skill 2133 
Hard DriveOptical DriveCoolingCooling
Crucial M4 + Samsung Spinpoint  Samsung BluRay Combo XSPC Rasa water block XSPC RX360 radiator 
CoolingCoolingOSMonitor
Black Ice SR1-240 radiator Lamptron FC2 6 channel fan controller Windows 7 x64 24" 1920x1200 + 42" 1080p 
PowerCaseMouseMouse Pad
Corsair AX850 Armor+ MX-518 Razer ExactMat 
AudioAudioOther
X-Fi Sony STR-DA2400ES Onkyo SKSHT528 
  hide details  
Reply
post #28 of 37
Thread Starter 
Oh okay I thought my new psu is faulty because it kept restarting but at stock it perfectly normal so I guess I try to up the vcore and go.from there thanks.
Monster X99 Build
(19 items)
 
Workstation
(14 items)
 
 
CPUMotherboardGraphicsRAM
Intel Xeon W3520  X58 Chipset PNY Nvidia Quadro 4000 15GB ECC DDR3  
Hard DriveHard DriveCoolingOS
Seagate Barracuda 250GB NCQ Western Digital Caviar Black 640GB Stock Windows 7 Professional x64 
MonitorKeyboardPowerCase
Dell U2711 Stock 475W 80 Plus Bronze HP 
MouseAudio
Stock Realtek 
  hide details  
Reply
Monster X99 Build
(19 items)
 
Workstation
(14 items)
 
 
CPUMotherboardGraphicsRAM
Intel Xeon W3520  X58 Chipset PNY Nvidia Quadro 4000 15GB ECC DDR3  
Hard DriveHard DriveCoolingOS
Seagate Barracuda 250GB NCQ Western Digital Caviar Black 640GB Stock Windows 7 Professional x64 
MonitorKeyboardPowerCase
Dell U2711 Stock 475W 80 Plus Bronze HP 
MouseAudio
Stock Realtek 
  hide details  
Reply
post #29 of 37
My guess is that this is all related to incorrect OC settings or some other user error.One thing about OC work is you have to be able to trace your steps back and see where it is possible you introduced the issue.There is simply no reason that voltages or other parameters measured and reported by software cannot have the accuracy needed.Think of all the equipment (including your car) that make millions of correct decisions based on software readings.
WC Rig
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7-930@4.05GHz ASUS P6X58D-Preminum XFX GeForce 275 896mb 6GB Corsair TR3X6G1600C8D 
Hard DriveOptical DriveOSMonitor
WD 150gb Raptor LightScan Win 7 64-bit Acer 22" 
KeyboardPowerCaseMouse
G15 Corsair HX620W Antec 1200 several various 
Mouse Pad
none 
  hide details  
Reply
WC Rig
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7-930@4.05GHz ASUS P6X58D-Preminum XFX GeForce 275 896mb 6GB Corsair TR3X6G1600C8D 
Hard DriveOptical DriveOSMonitor
WD 150gb Raptor LightScan Win 7 64-bit Acer 22" 
KeyboardPowerCaseMouse
G15 Corsair HX620W Antec 1200 several various 
Mouse Pad
none 
  hide details  
Reply
post #30 of 37
Thread Starter 
Quote:
Originally Posted by PCCstudent View Post
My guess is that this is all related to incorrect OC settings or some other user error.One thing about OC work is you have to be able to trace your steps back and see where it is possible you introduced the issue.There is simply no reason that voltages or other parameters measured and reported by software cannot have the accuracy needed.Think of all the equipment (including your car) that make millions of correct decisions based on software readings.
Yes your right..I have everything at stock and the problem is.solve, I will have to start my.over from scratch.and.hope I can find the right voltage for my 4.5 or 4.6 of thx for the.info.
Monster X99 Build
(19 items)
 
Workstation
(14 items)
 
 
CPUMotherboardGraphicsRAM
Intel Xeon W3520  X58 Chipset PNY Nvidia Quadro 4000 15GB ECC DDR3  
Hard DriveHard DriveCoolingOS
Seagate Barracuda 250GB NCQ Western Digital Caviar Black 640GB Stock Windows 7 Professional x64 
MonitorKeyboardPowerCase
Dell U2711 Stock 475W 80 Plus Bronze HP 
MouseAudio
Stock Realtek 
  hide details  
Reply
Monster X99 Build
(19 items)
 
Workstation
(14 items)
 
 
CPUMotherboardGraphicsRAM
Intel Xeon W3520  X58 Chipset PNY Nvidia Quadro 4000 15GB ECC DDR3  
Hard DriveHard DriveCoolingOS
Seagate Barracuda 250GB NCQ Western Digital Caviar Black 640GB Stock Windows 7 Professional x64 
MonitorKeyboardPowerCase
Dell U2711 Stock 475W 80 Plus Bronze HP 
MouseAudio
Stock Realtek 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Power Supplies
Overclock.net › Forums › Components › Power Supplies › Corsair AX850 HELP