Sorry to keep spamming this thread...
Originally Posted by Riskitall84
Ok nearly an hour into prime at 4.6 1.36 volts. Will se how it goes but think I may be getting there now!
Sent from my GT-I9100 using Tapatalk
Suddenly mine seems to be looking much better as well. I think someone earlier in the thread said something about their's improving after letting everything run for a week. I can't find the post though. Maybe that's what's going on here.
Originally Posted by breenemeister
Well, that's one awesome chip. I'm not so lucky. At 4.6 with vcore set to 1.340 and LLC enabled at ultra high, I can't get prime custom blend at 1792 to run for more than 2 minutes. No BSOD. Prime throws and error and gives me a window to close. Looks like I got a dud chip once again.
I can run for hours at 4.5 with vcore set to 1.275. How in the heck do I have an OC wall at 4.6 on a "cherry-picked" 2700k
If I set vcore to auto and set the multiplier at 46, it sets vcore to 1.45. That sucks.
I'm not bitter am I?
Just for kicks, I ran standard P95 blend at 4.6 GHz @ 1.34v and it kept going, so I tested 1344 and 1792 using 90 percent of my RAM and they both went past 15 minutes. I repeated 1344 with 1792 at 4.7 GHz @ 1.34 and they passed 15 minutes, too. Right now I'm an hour into standard blend and it's looking good so far. Very strange, I couldn't get 4.6 for two minutes, now I'm running 4.7 at the same voltage. I guess there's still hope, maybe a reboot fixed it. If it passes, I'll try lowering vcore a little.