Overclock.net › Forums › AMD › AMD CPUs › Have enough spec?
New Posts  All Forums:Forum Nav:

Have enough spec?

post #1 of 12
Thread Starter 
Since i have little expirience i need advice if my mbo & psu can handle future OCs? Currently i have OC-od cpu with setting multiplier to 19.0 and adding 0.025 to voltage. Screenshot taken in middle of test for you to see current temps at load:
http://www.dodaj.rs/?2o/Pw/1rs0qA5E/...r2011-11-0.jpg
at the end:
http://www.dodaj.rs/?1a/Bj/1y4wCOJZ/...r2011-11-0.jpg
I think maybie i should go for 4Ghz with same cpu voltage and NB at 2600?
Current voltages for cpu read by Aida64 and cpu-z are 1.416.
Thanks for your time.
Edited by morando - 11/1/11 at 6:11pm
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Phenom x4 955 c3 Asus m5a97 (no Pro,Evo) Gainward GTX 560 Ti Kingston DDR3 1333 
Hard DriveOptical DriveOSMonitor
2xHitachi; 1xWDC; SATA3 Pioneer DVD-RW Windows7 x64 Samsung 2243sn 
PowerCase
Seasonic 500-ET blueberry... 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Phenom x4 955 c3 Asus m5a97 (no Pro,Evo) Gainward GTX 560 Ti Kingston DDR3 1333 
Hard DriveOptical DriveOSMonitor
2xHitachi; 1xWDC; SATA3 Pioneer DVD-RW Windows7 x64 Samsung 2243sn 
PowerCase
Seasonic 500-ET blueberry... 
  hide details  
Reply
post #2 of 12
You can easily bump it up to 4 GHz at 1.41v
Main (2014)
(12 items)
 
Work Rig (2012)
(15 items)
 
 
CPUMotherboardGraphicsRAM
Intel Core i7 4790k Gigabyte G1 Sniper Z97 EVGA GTX 770 4GB FTW 2x 8GB Corsair Dominator  
Hard DriveHard DriveCoolingOS
Crucial MX100 512GB 2x WD SE 2TB (RAID-1) Corsair H100i Windows 7 Pro 
MonitorKeyboardCaseMouse
LG 29UM65-P IPS CMStorm Quickfire TK Red Corsai A540 White Proteus Core 
CPUMotherboardGraphicsRAM
Intel Core i5 2500k ASUS P8Z68-M Pro  EVGA GTX 680 SC+ 16GB Mushkin Enhanced Frostbyte 
Hard DriveOptical DriveCoolingOS
Crucial M4 128GB LG GH24LS50  Noctua C12P Windows 7 Pro 
MonitorKeyboardPowerCase
3x 27" Displays CMStorm Quickfire TK Brown Cyberpower CP1500AVRLCD Lian Li PC-V354B 
MouseMouse PadAudio
Logitech G400 Mionix Sargas 900 Corsair SP2500 / Bose Cinemate Series II 
  hide details  
Reply
Main (2014)
(12 items)
 
Work Rig (2012)
(15 items)
 
 
CPUMotherboardGraphicsRAM
Intel Core i7 4790k Gigabyte G1 Sniper Z97 EVGA GTX 770 4GB FTW 2x 8GB Corsair Dominator  
Hard DriveHard DriveCoolingOS
Crucial MX100 512GB 2x WD SE 2TB (RAID-1) Corsair H100i Windows 7 Pro 
MonitorKeyboardCaseMouse
LG 29UM65-P IPS CMStorm Quickfire TK Red Corsai A540 White Proteus Core 
CPUMotherboardGraphicsRAM
Intel Core i5 2500k ASUS P8Z68-M Pro  EVGA GTX 680 SC+ 16GB Mushkin Enhanced Frostbyte 
Hard DriveOptical DriveCoolingOS
Crucial M4 128GB LG GH24LS50  Noctua C12P Windows 7 Pro 
MonitorKeyboardPowerCase
3x 27" Displays CMStorm Quickfire TK Brown Cyberpower CP1500AVRLCD Lian Li PC-V354B 
MouseMouse PadAudio
Logitech G400 Mionix Sargas 900 Corsair SP2500 / Bose Cinemate Series II 
  hide details  
Reply
post #3 of 12
Thread Starter 
Quote:
Originally Posted by brackberry View Post
You can easily bump it up to 4 GHz at 1.41v
Without touching NB freq. and NB volt. ?
Thanks.
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Phenom x4 955 c3 Asus m5a97 (no Pro,Evo) Gainward GTX 560 Ti Kingston DDR3 1333 
Hard DriveOptical DriveOSMonitor
2xHitachi; 1xWDC; SATA3 Pioneer DVD-RW Windows7 x64 Samsung 2243sn 
PowerCase
Seasonic 500-ET blueberry... 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Phenom x4 955 c3 Asus m5a97 (no Pro,Evo) Gainward GTX 560 Ti Kingston DDR3 1333 
Hard DriveOptical DriveOSMonitor
2xHitachi; 1xWDC; SATA3 Pioneer DVD-RW Windows7 x64 Samsung 2243sn 
PowerCase
Seasonic 500-ET blueberry... 
  hide details  
Reply
post #4 of 12
You can bump 4GHz with 1.45v (minimum) or 1.5v depend on your stability. Next time test it with prim95 blend 6~9hours to be sure and report us the temperatures. Remember maximum 7/24 voltage is 1.55v and max temp for your cpu is 62'C stay below 60'C to be safe.
    
CPUMotherboardGraphicsRAM
AMD Phenom II x4 925 C2 2.8@3.7GHz NB 2.65GHz 1... Asrock 970 Extreme 4 UEFI Palit GTX 460 Sonic Platinum 840MHz Core/1055MH... 2x4GB Kingston HyperX 1600@1414MHz 7-7-7-21 1.65v 
Hard DriveOptical DriveCoolingOS
Seagate Barracuda 1TB 7200RPM 32MB Sata 3 6GB/s Sony Optiarc 5260s 24X DVD+/-RW Cooler Master Hyper TX3 / AMD Stock fan as VRM ... Windows 7 Ultimate x64 
MonitorPowerCase
Samsung SyncMaster S24B300HL 1920x1080 Cooler Master GX 750W Cooler Master Elite 430 Black 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
AMD Phenom II x4 925 C2 2.8@3.7GHz NB 2.65GHz 1... Asrock 970 Extreme 4 UEFI Palit GTX 460 Sonic Platinum 840MHz Core/1055MH... 2x4GB Kingston HyperX 1600@1414MHz 7-7-7-21 1.65v 
Hard DriveOptical DriveCoolingOS
Seagate Barracuda 1TB 7200RPM 32MB Sata 3 6GB/s Sony Optiarc 5260s 24X DVD+/-RW Cooler Master Hyper TX3 / AMD Stock fan as VRM ... Windows 7 Ultimate x64 
MonitorPowerCase
Samsung SyncMaster S24B300HL 1920x1080 Cooler Master GX 750W Cooler Master Elite 430 Black 
  hide details  
Reply
post #5 of 12
that's a c3 stepping. 4ghz is easy. just bump the multiplier and increase the voltage to 1.45-1.475
post #6 of 12
Thread Starter 
Ok, thanks. I'll wait till night to let it run while i sleep, i'll report back if it was successful.
I ask this because my friend got same cpu and mbo, only difference is that he has PRO at end of his mbo name (mine doesn't), and he has cpu @4GHz 1.4v (flat) & NB @ 2600 (default volt.).
I have some earlier ss with prime @3.8Ghz, but that is just 1h long:
http://www.dodaj.rs/?27/9M/4nJ9M2fL/...r2011-10-3.jpg
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Phenom x4 955 c3 Asus m5a97 (no Pro,Evo) Gainward GTX 560 Ti Kingston DDR3 1333 
Hard DriveOptical DriveOSMonitor
2xHitachi; 1xWDC; SATA3 Pioneer DVD-RW Windows7 x64 Samsung 2243sn 
PowerCase
Seasonic 500-ET blueberry... 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Phenom x4 955 c3 Asus m5a97 (no Pro,Evo) Gainward GTX 560 Ti Kingston DDR3 1333 
Hard DriveOptical DriveOSMonitor
2xHitachi; 1xWDC; SATA3 Pioneer DVD-RW Windows7 x64 Samsung 2243sn 
PowerCase
Seasonic 500-ET blueberry... 
  hide details  
Reply
post #7 of 12
just get a stable overclock first. if you're sure it's 100% stable then that's where you undervolt the vcore or increase the NB. for now just get 4ghz stable 12 hours prime (that's just me maybe less for others)
post #8 of 12
Thread Starter 
Thanks. I'll let Prime while i sleep.
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Phenom x4 955 c3 Asus m5a97 (no Pro,Evo) Gainward GTX 560 Ti Kingston DDR3 1333 
Hard DriveOptical DriveOSMonitor
2xHitachi; 1xWDC; SATA3 Pioneer DVD-RW Windows7 x64 Samsung 2243sn 
PowerCase
Seasonic 500-ET blueberry... 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Phenom x4 955 c3 Asus m5a97 (no Pro,Evo) Gainward GTX 560 Ti Kingston DDR3 1333 
Hard DriveOptical DriveOSMonitor
2xHitachi; 1xWDC; SATA3 Pioneer DVD-RW Windows7 x64 Samsung 2243sn 
PowerCase
Seasonic 500-ET blueberry... 
  hide details  
Reply
post #9 of 12
Let us know how it goes
Main (2014)
(12 items)
 
Work Rig (2012)
(15 items)
 
 
CPUMotherboardGraphicsRAM
Intel Core i7 4790k Gigabyte G1 Sniper Z97 EVGA GTX 770 4GB FTW 2x 8GB Corsair Dominator  
Hard DriveHard DriveCoolingOS
Crucial MX100 512GB 2x WD SE 2TB (RAID-1) Corsair H100i Windows 7 Pro 
MonitorKeyboardCaseMouse
LG 29UM65-P IPS CMStorm Quickfire TK Red Corsai A540 White Proteus Core 
CPUMotherboardGraphicsRAM
Intel Core i5 2500k ASUS P8Z68-M Pro  EVGA GTX 680 SC+ 16GB Mushkin Enhanced Frostbyte 
Hard DriveOptical DriveCoolingOS
Crucial M4 128GB LG GH24LS50  Noctua C12P Windows 7 Pro 
MonitorKeyboardPowerCase
3x 27" Displays CMStorm Quickfire TK Brown Cyberpower CP1500AVRLCD Lian Li PC-V354B 
MouseMouse PadAudio
Logitech G400 Mionix Sargas 900 Corsair SP2500 / Bose Cinemate Series II 
  hide details  
Reply
Main (2014)
(12 items)
 
Work Rig (2012)
(15 items)
 
 
CPUMotherboardGraphicsRAM
Intel Core i7 4790k Gigabyte G1 Sniper Z97 EVGA GTX 770 4GB FTW 2x 8GB Corsair Dominator  
Hard DriveHard DriveCoolingOS
Crucial MX100 512GB 2x WD SE 2TB (RAID-1) Corsair H100i Windows 7 Pro 
MonitorKeyboardCaseMouse
LG 29UM65-P IPS CMStorm Quickfire TK Red Corsai A540 White Proteus Core 
CPUMotherboardGraphicsRAM
Intel Core i5 2500k ASUS P8Z68-M Pro  EVGA GTX 680 SC+ 16GB Mushkin Enhanced Frostbyte 
Hard DriveOptical DriveCoolingOS
Crucial M4 128GB LG GH24LS50  Noctua C12P Windows 7 Pro 
MonitorKeyboardPowerCase
3x 27" Displays CMStorm Quickfire TK Brown Cyberpower CP1500AVRLCD Lian Li PC-V354B 
MouseMouse PadAudio
Logitech G400 Mionix Sargas 900 Corsair SP2500 / Bose Cinemate Series II 
  hide details  
Reply
post #10 of 12
Thread Starter 
I must admit that i am a bit scared after reading this thread. It looks like my MBO has 4+1 phase so i am not sure if i can reach 4Ghz without burning it? What do you guy's recommend? Is this related to MBO temps?
Thanks for your time.
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Phenom x4 955 c3 Asus m5a97 (no Pro,Evo) Gainward GTX 560 Ti Kingston DDR3 1333 
Hard DriveOptical DriveOSMonitor
2xHitachi; 1xWDC; SATA3 Pioneer DVD-RW Windows7 x64 Samsung 2243sn 
PowerCase
Seasonic 500-ET blueberry... 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Phenom x4 955 c3 Asus m5a97 (no Pro,Evo) Gainward GTX 560 Ti Kingston DDR3 1333 
Hard DriveOptical DriveOSMonitor
2xHitachi; 1xWDC; SATA3 Pioneer DVD-RW Windows7 x64 Samsung 2243sn 
PowerCase
Seasonic 500-ET blueberry... 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: AMD CPUs
Overclock.net › Forums › AMD › AMD CPUs › Have enough spec?