Overclock.net › Forums › Intel › Intel CPUs › 2600k 4.6Ghz cant go any further
New Posts  All Forums:Forum Nav:

2600k 4.6Ghz cant go any further

post #1 of 6
Thread Starter 
Hi so ive been trying to push 4.8Ghz right atm im at 4.6 with 1.34VCore using offset. now when ever i try to use offset for 4.8Ghz it goes all waky for example if i set it at 4.8Ghz with the offset on auto it pump like 1.59VCore through the chip HOLY ****. anyway so i enter this is -0.005 and i BSOD LLC is set to extreme and PPL overvolt enabled. no matter what other value i enter it always BSOD and auto puts WAY TO MUCH VOLTS
post #2 of 6
Sounds like you reached the limit of your chip, without going to extremes.

Besides, who needs 4.8Ghz anyway

You could however, start from 1.59v and lower it steadily until windows BSODs. That way you'll know for sure that you reached some kind of wall.
Edited by Xenthos - 11/5/11 at 1:58am
post #3 of 6
Thread Starter 
cant lower it i enter in the lowest value in the offset voltage and i BSOD -0.005
post #4 of 6
Lol you tried + Offset..?
post #5 of 6
Thread Starter 
ok im using offset +0.030. at 1.46VCore for a 4.8Ghz OC any tips are welcome

PPL on
LLC Extreme
post #6 of 6
Thread Starter 
update PC restarts after running pime95 for 5mins at 4.8 @ 1.46VCore which means it wants more VCore. i think 4.6Ghz is the limit. anyway prime95 was running for about 5mins @ 4.8Ghz 1.46VCore highest temp was 71c using realtemp and room temp is 24c. then pc restarts lol
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › 2600k 4.6Ghz cant go any further