Overclock.net › Forums › Intel › Intel - General › Temps and voltages looking OK?
New Posts  All Forums:Forum Nav:

Temps and voltages looking OK?

post #1 of 3
Thread Starter 
I bought a pre-OC'd bundle (CPU, RAM and Motherboard) from Scan.co.uk. It's running at 4.7ghz, I just wanted some smart person to check the voltages and temps, make sure they are all good!

Setup is:

Intel Core i7 2600K @ 4.7ghz
Corsair H100 (Zalman ZM-F3 Push/Pull)
Asus P8Z68V Pro
8GB Corsair Vengeance LP 1600mhz
Asus Xonar Essence ST
Antec True Power 650W
Corsair 800D
2 SSD'd, 3 HDD's

post #2 of 3
volts looking good, but i thought scan dont go above 1.35v...hmmmm

put the cpu and gpu under load to see your max temps
use prime 95 blend for cpu
use occt gpu tester for gpu

if i were you, stress test the cpu just to be on the safe side, a friend of mine bought a pre oc'd one from a different website and it wasnt stable when i told him to test it, doesnt harm to stress it even though they have

if you dont mind can you take a pic of your voltage settings in your BIOS, or if you scroll down the page to show rest of voltages, BIOS would be better tho
post #3 of 3
have you stressed it and checked what the voltages are under load?
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel - General
Overclock.net › Forums › Intel › Intel - General › Temps and voltages looking OK?