Steps. Put the springs then washes on the four black screws. Make sure the back plate is on the back of your mobo, depending on the CPU, amd has the bigger one. Hook the radiator up, it comes with 3 fans, put them so they are pulling outside air and pushing it into the rad. Do not tighten screws too tight, or it will puncture the radiator. Put some of the supplied thermal paste, or your choice paste in the middle of the CPU, put the waterblock on top and screw each of the four screws as tight as ya can. Then hook up a hose from CPU waterblock out to any of the radiator barbs. Then
Hook a tubing up from other radiator port to the res/ pump, hook this tube up to the bottom left barb, not the one behind the black motor. Then hook tubing from the barb behind the black motor to the CPU in on the waterblock. Fill it, will need more distilled water because it will Need to fill the tubing and radiator. Let it run to get the air bubbles out. Congrats ur done!
Sent from my ADR6300 using Tapatalk