Overclock.net › Forums › Cooling › Water Cooling › mcp350 to mcp355 mod question
New Posts  All Forums:Forum Nav:

mcp350 to mcp355 mod question

post #1 of 4
Thread Starter 
Just picked up a mcp350. I opened it up, but it doesn't look like the same wiring from the mod guides. Can this be modded to a 355?


Edited by WMW - 11/8/11 at 4:16pm
post #2 of 4
Nope, that DDC pump is pre-jumper mod era. If you do jumper it, the pump will fry like a smelly egg. the blue wire is the tach speed feedback and the yellow is the 12VDC power line. The pump will fry if the jumper mod is attempted. That 350 is the early DDC pump with the Swiftech wiring scheme layout of colors.

BUT, you can add a retail performance top like the EK or the XSPC to boost flow better than a 355. thumb.gif

With the performance top, typical flow would be better than 1.0gpm in an average loop.

Hope this info helps from the pump maverick. biggrin.gif
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Athlon 64 x2 5000 Black 2.6Ghz OC 3.3Ghz GigaByte GA-MA78GM-S2H Full Radeon 780G HD 3200 4GB Corsair DDR2 6400C4 
Hard DriveOSPowerCase
Seagate Barracuda 750GB 7200 RPM 32MB Cache Windows 7 Pro x64 Corsair HX620W Meridian XClio High Tower I 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Athlon 64 x2 5000 Black 2.6Ghz OC 3.3Ghz GigaByte GA-MA78GM-S2H Full Radeon 780G HD 3200 4GB Corsair DDR2 6400C4 
Hard DriveOSPowerCase
Seagate Barracuda 750GB 7200 RPM 32MB Cache Windows 7 Pro x64 Corsair HX620W Meridian XClio High Tower I 
  hide details  
Reply
post #3 of 4
Would you not just solder the empty terminal with the yellow terminal?
Wall-E
(16 items)
 
  
CPUMotherboardGraphicsGraphics
i7 2600K GA-Z68X-UD3H-B3 6990 6990 
RAMHard DriveHard DriveHard Drive
16GB Kingston Hyper-X DDR3-1600 PNY SSD OS [RAID0][2x] 512GB WD 600GB Raptor 10K WD Black 1TB 
Optical DriveOSMonitorPower
Samsung DVD-RAM Windows 8.1 Enterprise 28" Hanns-G BFG 1200W 
Case
Custom Wallhanger - see sig 
  hide details  
Reply
Wall-E
(16 items)
 
  
CPUMotherboardGraphicsGraphics
i7 2600K GA-Z68X-UD3H-B3 6990 6990 
RAMHard DriveHard DriveHard Drive
16GB Kingston Hyper-X DDR3-1600 PNY SSD OS [RAID0][2x] 512GB WD 600GB Raptor 10K WD Black 1TB 
Optical DriveOSMonitorPower
Samsung DVD-RAM Windows 8.1 Enterprise 28" Hanns-G BFG 1200W 
Case
Custom Wallhanger - see sig 
  hide details  
Reply
post #4 of 4
. .



.
Edited by bmaverick - 11/30/11 at 7:32pm
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Athlon 64 x2 5000 Black 2.6Ghz OC 3.3Ghz GigaByte GA-MA78GM-S2H Full Radeon 780G HD 3200 4GB Corsair DDR2 6400C4 
Hard DriveOSPowerCase
Seagate Barracuda 750GB 7200 RPM 32MB Cache Windows 7 Pro x64 Corsair HX620W Meridian XClio High Tower I 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Athlon 64 x2 5000 Black 2.6Ghz OC 3.3Ghz GigaByte GA-MA78GM-S2H Full Radeon 780G HD 3200 4GB Corsair DDR2 6400C4 
Hard DriveOSPowerCase
Seagate Barracuda 750GB 7200 RPM 32MB Cache Windows 7 Pro x64 Corsair HX620W Meridian XClio High Tower I 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Water Cooling
Overclock.net › Forums › Cooling › Water Cooling › mcp350 to mcp355 mod question