Originally Posted by creton123
but if i put it on the other side how do i make the fan run in the oposite direction i just need to put the connector on the other side too?
Thanks creton123, my fellow Canadian, not sure if I get you right but:
Answer#1: As long as the cable is long enough... you should be able to plug it into the same place w/o switching to another one.
Answer#2: to switch between installing a push fan and a pull fan, all you have to do is to flip around to the other side of the fan and install onto the same spot on the heat sink or just simply keep fan in same direction and install the fan on the other side of the heat sink.
Installing it as a push fan should be better than installing it as a pull fan...
Not sure if any of these are the answer(s) you are looking for.
Edited by ocman - 11/8/11 at 7:35pm