Overclock.net › Forums › Overclock.net Forum › Forum Platform Help and Discussion  › Anyone getting "Could not read import file."
New Posts  All Forums:Forum Nav:

Anyone getting "Could not read import file."

post #1 of 2
Thread Starter 
I'm using the auto upload thing. I used the program to create a .json file, but when I go to upload, I get:

"Could not read import file."

Anyone else getting this? The content of my file is:
Code:
{
"CPUID": {
"SDK version":"1.58",
"JSON version":"1"}
,
"Processor": [
{
"id":"0",
"Number of cores":"2",
"Number of threads":"4",
"Name":"Intel Core i3 370M",
"Codename":"Arrandale",
"Specification":"Intel(R) Core(TM) i3 CPU       M 370  @ 2.40GHz",
"Package (platform ID)":"Socket 989 rPGA (0x4)",
"CPUID":"6.5.5",
"Extended CPUID":"6.25",
"Core Stepping":"K0",
"Technology":"32 nm",
"TDP Limit":"25 Watts",
"Core Speed":"3761.0 MHz",
"Multiplier x FSB":"9.0 x 133.0 MHz",
"Rated Bus speed":"2394.3 MHz",
"Stock frequency":"2400 MHz",
"Instructions sets":"MMX, SSE, SSE2, SSE3, SSSE3, SSE4.1, SSE4.2, EM64T, VT-x",
"L1 Data cache":"2 x 32 KBytes, 8-way set associative, 64-byte line size",
"L1 Instruction cache":"2 x 32 KBytes, 4-way set associative, 64-byte line size",
"L2 cache":"2 x 256 KBytes, 8-way set associative, 64-byte line size",
"L3 cache":"3 MBytes, 12-way set associative, 64-byte line size"}
]
,
"Motherboard": {
"Model":"00CKNG (0x00000183 - 0x004614E0)"}
,
"Chipset": {
"Northbridge":"Intel Havendale/Clarkdale Host Bridge rev. 18",
"Southbridge":"Intel HM57 rev. 06",
"Memory Type":"DDR3",
"Memory Size":"4096 MBytes",
"Channels":"Dual, (Symmetric)",
"Memory Frequency":"532.1 MHz (4:16)",
"CAS# latency (CL)":"8.0",
"RAS# to CAS# delay (tRCD)":"8",
"RAS# Precharge (tRP)":"8",
"Cycle Time (tRAS)":"20",
"Row Refresh Cycle Time (tRFC)":"86",
"Command Rate (CR)":"1T"}
,
"Memory SPD": {
"DIMM": [
{
"DIMM #":"1",
"SPD Information": {
"SMBus address":"0x50",
"Memory type":"DDR3",
"Module format":"SO-DIMM",
"Manufacturer (ID)":"Corsair (7F7F9E0000000000)",
"Size":"2048 MBytes",
"Max bandwidth":"PC3-10700H (667 MHz)",
"Part number":"CMSO2GX3M1A1333C9 ",
"Number of banks":"8",
"Nominal Voltage":"1.50 Volts",
"EPP":"no",
"XMP":"no"}
,
"JEDEC timings table": {
"legend":"CL-tRCD-tRP-tRAS-tRC @ frequency",
"JEDEC #1":"6.0-6-6-16-23 @ 444 MHz",
"JEDEC #2":"8.0-8-8-22-30 @ 592 MHz",
"JEDEC #3":"9.0-9-9-24-34 @ 666 MHz"}
}
,
{
"DIMM #":"2",
"SPD Information": {
"SMBus address":"0x52",
"Memory type":"DDR3",
"Module format":"SO-DIMM",
"Manufacturer (ID)":"Hyundai Electronics (AD00000000000000)",
"Size":"2048 MBytes",
"Max bandwidth":"PC3-10700 (667 MHz)",
"Part number":"HMT325S6BFR8C-H9  ",
"Serial number":"09643A25",
"Manufacturing date":"Week 43/Year 10",
"Number of banks":"8",
"Nominal Voltage":"1.50 Volts",
"EPP":"no",
"XMP":"no"}
,
"JEDEC timings table": {
"legend":"CL-tRCD-tRP-tRAS-tRC @ frequency",
"JEDEC #1":"5.0-5-5-14-19 @ 380 MHz",
"JEDEC #2":"6.0-6-6-17-23 @ 457 MHz",
"JEDEC #3":"7.0-7-7-20-27 @ 533 MHz",
"JEDEC #4":"8.0-8-8-22-30 @ 609 MHz",
"JEDEC #5":"9.0-9-9-25-34 @ 685 MHz"}
}
]
}
,
"LPCIO": {
"LPCIO Vendor":"NS",
"LPCIO Vendor ID":"0xFF02",
"LPCIO Chip ID":"0x85",
"LPCIO Revision ID":"0x0"}
,
"Hardware Monitors": {
"Hardware monitor Intel PCH": {
"Temperature 4":"59°C (138°F) [0x3B] (PCH)",
"Temperature 5":"51°C (123°F) [0x33] (GMCH)"}
,
"Hardware monitor ACPI": {
"Temperature 0":"27°C (80°F) [0xBB8] (TZ00)",
"Temperature 1":"0°C (32°F) [0xAAC] (TZ01)"}
,
"Hardware monitor Battery": {
"Voltage 0":"12.17 Volts [0x2F88] (Current Voltage)",
"Capacity 0":"5200 mWh [0x1450] (Designed Capacity)",
"Capacity 1":"5001 mWh [0x1389] (Full Charge Capacity)",
"Capacity 2":"4178 mWh [0x1052] (Current Capacity)",
"Level 0":"4 pc [0x60] (Wear Level)",
"Level 1":"84 pc [0x53] (Charge Level)"}
}
,
"DMI": [
{
"type":"BIOS",
"vendor":"Dell Inc.",
"version":"A03",
"date":"10/15/2010"}
,
{
"type":"System Information",
"manufacturer":"Dell Inc.",
"product":"XPS L501X",
"version":"A03",
"serial":"B1HKSN1",
"UUID":"{4C4C4544-0031-4810-804B-C2C04F534E31}"}
,
{
"type":"Baseboard",
"vendor":"Dell Inc.",
"model":"00CKNG",
"revision":"A03",
"serial":".B1HKSN1.CN486430BC1870."}
,
{
"type":"System Enclosure",
"manufacturer":"Dell Inc.",
"chassis type":"Portable",
"chassis serial":"B1HKSN1"}
,
{
"type":"Processor",
"manufacturer":"Intel",
"model":"CPU Version",
"clock speed":"2400.0 MHz",
"FSB speed":"133.0 MHz",
"multiplier":"18.0x"}
,
{
"type":"Port Connector",
"designation (internal)":"JUSB1",
"designation (external)":"USB",
"port type":"USB",
"connector (external)":"Access Bus (USB)"}
,
{
"type":"Port Connector",
"designation (internal)":"JUSB2",
"designation (external)":"USB",
"port type":"USB",
"connector (external)":"Access Bus (USB)"}
,
{
"type":"Port Connector",
"designation (internal)":"CON1",
"designation (external)":"LAN",
"port type":"Network Port",
"connector (external)":"RJ-45"}
,
{
"type":"Port Connector",
"designation (internal)":"CN7",
"designation (external)":"ESATA"}
,
{
"type":"Extension Slot",
"designation":"PEG Slot J6B2",
"type":"A5",
"width":"32 bits",
"populated":"yes"}
,
{
"type":"Extension Slot",
"designation":"PCI Express Slot J6B1",
"type":"A5",
"width":"32 bits",
"populated":"no"}
,
{
"type":"Extension Slot",
"designation":"PCI Express Slot J6D1",
"type":"A5",
"width":"32 bits",
"populated":"yes"}
,
{
"type":"Extension Slot",
"designation":"PCI Express Slot J8B3",
"type":"A5",
"width":"32 bits",
"populated":"no"}
,
{
"type":"Extension Slot",
"designation":"PCI Express Slot J8D1",
"type":"A5",
"width":"32 bits",
"populated":"yes"}
,
{
"type":"Extension Slot",
"designation":"PCI Express Slot J7B1",
"type":"A5",
"width":"32 bits",
"populated":"yes"}
,
{
"type":"Extension Slot",
"designation":"PCI Express Slot 6",
"type":"A5",
"width":"32 bits",
"populated":"yes"}
,
{
"type":"OEM Strings",
"string[0]":"Dell System",
"string[1]":"5",
"string[2]":"13"}
,
{
"type":"Physical Memory Array",
"location":"Motherboard",
"usage":"System Memory",
"correction":"None",
"max capacity":"8192 MBytes",
"max# of devices":"2"}
,
{
"type":"Memory Device",
"designation":"DIMM_A",
"format":"SODIMM",
"type":"unknown",
"total width":"64 bits",
"data width":"64 bits",
"size":"2048 MBytes"}
,
{
"type":"Memory Device",
"designation":"DIMM_B",
"format":"SODIMM",
"type":"unknown",
"total width":"64 bits",
"data width":"64 bits",
"size":"2048 MBytes"}
]
,
"Graphic APIs": [
{"API": "Intel I/O"}
]
,
"Display Adapters": [
{
"id":"0",
"Display name":"\\.\DISPLAY1",
"Name":"Intel(R) HD Graphics",
"Memory size":"1024 MB",
"PCI device":"bus 0 (0x0), device 2 (0x2), function 0 (0x0)",
"Vendor ID":"0x8086 (0x1028)",
"Model ID":"0x0046 (0x046E)",
"Performance Level":"0"}
]
,
"Software": {
"Windows Version":"Microsoft Windows 7 (6.1) Home Premium Edition  Service Pack 1 (Build 7601) ",
"DirectX Version":"11.0"}
}

Edited by 98uk - 11/13/11 at 1:05pm
post #2 of 2
You're not the only one having problems with it: http://www.overclock.net/t/1164339/rig-builder-system-interrogator-problem
New Posts  All Forums:Forum Nav:
  Return Home
Overclock.net › Forums › Overclock.net Forum › Forum Platform Help and Discussion  › Anyone getting "Could not read import file."