Overclock.net › Forums › Intel › Intel Motherboards › Ultimate X79-UD7 Review w/ 3960K (BIOS Walkthrough, Digital PWM Explained, Benchmarks)
New Posts  All Forums:Forum Nav:

Ultimate X79-UD7 Review w/ 3960K (BIOS Walkthrough, Digital PWM Explained, Benchmarks)

post #1 of 15
Thread Starter 
Welcome, its a bit after NDA, and if you've decided on Sandy Bridge-E as your next platform, or your just interested in the new boards, today I have a good bit in store for you.
glam1.jpg

X79-OC... OOPS I meant UD7 Review.
To introduce the X79 platform, we must start with the CPU, for starters Intel will be launching their 3960X and 3930K, the 3 in the first digit is for 3rd Generation Core i7 Processor, so the 3960 is like a 960, compare it to Bloomfield, with 960 and 930, so these processors will have predecessors. So let's start with the CPU, on die we have a PCI-E controller much like Sandy Bridge, but with 40 PCI-E 3.0 lanes. 6-Cores along with cache and a system agent with an IMC. The IMC is quad channel, but also supports dual or triple channel. So as long as you put more than 1 stick of memory in there, it will optimize the memory channels. You can even mix two different sets of memory, and set their timings and voltages independently.

This platform is really feature packed, and it seems like most board makers are bringing out their A game, so let's see what GIGABYTE has to offer for X79. Can they produce another X58A-OC or even something better?
  1. Box + Acessories
  2. Board and Layout
  3. Digital PWM with a new VRM
  4. A Closer Look at the ICs
  5. BIOS
  6. Included Software
  7. Test Setup and the Board in Action
  8. Benchmarks
  9. Conclusion

Box + Accessories:
Nice white box, like an Apple product, personally I don't like Apple, but GIGABYTE did a nice job with the packaging.
boxfb.jpg
boxbacko.jpg
inboxt.jpg
acessories.jpg
Now if you're thinking, "That is a lot of accessories" you and I would be thinking the same thing.

Here is a close up of the Wifi/BT module:
wifif.jpg

The board:
boardac.jpg

The backpanel:
backpan.jpg

That two color button is for the BIOS switch, you can select whether you want to use the main or backup BIOS, also the small black button is for ClearCMOS.


Board and Layout
uper.jpg
Yea the socket is really huge, but you can also see that the DIMMs are close as well, this is to reduce trace length. That is why we see DIMMs on either side of the board. On boards with more than 4 DIMMs its recommended to OC with the first 2 on either side.
You can also see that the socket has holes built into its bracket, these are standard sized, so you can screw things down into them. I was able to get my Antec Kuhler 920 and Hyper 212+ to fit without issue, I haven't tried other heatsinks, but most should fit.

Now here is something I found out when I took off the bracket, you can actually puncture a piece of plastic and make a through-hole:
interestingk.jpg

Here is the bottom half:
lowpq.jpg
Now you can see that there is good spacing between the bottom of the memory slots and top of the first PCI-E 16x slot, this allows for overclockers to insulate the GPUs easily, and leave room for the memory, and changing memory out. It does also make this board ATX-XL, but as i am told not the full XL length.

A lot of you are wondering about the area with the buttons:
ocpanel.jpg
OK so we have a whole OC area over here, infact other than the backpanel with the ClearCMOS, and the dualBIOS switch, you can just handle everything from right here. We have two sets of +/- buttons, the ones to the left are for the multiplier and the ones on the right are for BLCK. The "Gear" button allows for the BLCK steps to be changed from 1mhz to 0.1mhz. We also have a Port80H LED POST Code display with codes in the back of the manual. Power and reset buttons are located here as are the voltage read points. Some connectors for the voltage read points are included, enough for every connector to be read at the same time. Also note that there are pads if you only have one DMM. You can also see a USB 3.0 connector, located north of the PCH to be closer to a USB 3.0 front panel bay, like the one included. That SATA power receptacle is for extra PCI-E power, and there is one more too a bit south.

pchj.jpg
Moving down south we have a lot of SATA connectors, but you see 4 missing, those were SAS ports for SATA6G, and Intel removed it from the PCH before launch.
The four gray are Marvell SATA6G, the 4 black are Intel SATA3G, and the 2 white are Intel SATA6G. You can also see a nice PCH heatsink, it actually says GIGABYTE OC on there, so maybe it really is an X79-OC?

Located right above the front panel connectors is a 2-pin ClearCMOS jumper, just short these two pins out and accomplish what the backpanel button does without having to actually reach back there.

pciee.jpg

We see some good spacing between slots here, but what is most odd is lack of PCI slots. As they are not native to the PCH X79, and haven't been for a while, manufacturers have to add PCI on there own if they want. A lot of users actually welcome to move to make PCI obsolete, personally I don't mind having PCI.

Ok now we take that heatsink off!
boardc.jpg

Here are the heatsinks:
heatsinkchip.jpg
heatsinkk.jpg
pchtim.jpg
vrheatsink.jpg
vrtim.jpg

Digital PWM and the new VRM:

So GIGABYTE switched to Digital, so what does that mean? It means that the Intersil Analog VRD 12 PWM has been changed to an International Rectifier Digital VRD12 PWM. Well the move to digital has two very big differences, first of all Digital PWMs offer much more control over every aspect of the voltage regulator, from the phase control to the LLC, the PWM even has built in NVM to store profiles. Settings can be changed real-time through software, and updated through the BIOS as well. Now this is the new 8-Phase IR PWM:
IRF3567
ir3567.jpg
The second big difference is that the error feedback loop is digitalized, and this means much higher precision.
Its 8 phases is 6+2, on this board all its 8 phases are used for just the CPU cores, but on the Assassin 2 its 4 phases for CPU cores and 1 of those +2 phases for the QPI/VTT VR. For comparison, the 8-Phase Chil PWM used on the Maximus 4 Extreme was 7+1 phases, on the Extreme all phases were used for the CPU Cores, but on the Gene the extra 1 phase was used for the iGPU, and 4 phases for the CPU Cores. There is a lot in common between ASUS and GIGABYTE PWMs right now, as International Rectifier bought Chil Semiconductor recently, and has since been putting out Digital PWMs with Chil technology, basically the same product under a different name. So now we have to look to the Rampage 4 Extreme and look to see what its VRM looks like without a heatsink, as the PWMs are basically the same.

Anyways GIGABYTE is using all digital 16+2+2+2+2 phases for the CPU Core+QPI/VTT+System Agent(IMC)+DDRA/B+DDRC/D
A lot of power. All of it Digital. GIGABYTE has employed two other 3+2 phase Digital PWMs.
IRF3570
ir3570dimm.jpg

GIGABYTE has switched away from DrMOS, as the doubling technology from Chil and IR consists of a solution that has integrated drivers on the doubler IC, this allows for better control of phase dropping while doubling as well as better monitoring. In theory at least. Here is how it works:
phasedoubling.png

Each doubler has two drivers built in, so its 3 chips in one, a doubler and two drivers, single PWM input and double driver output.

GIGABYTE has also switched away from their older Low RDS(ON) MOSFETs, and has switched to much higher rated IR MOSFETs,
IRFH8318for the low-side and IRFH8330 for the high-side.
newfets.jpg

Now GIGABYTE is also using the POSCaps we saw on the X58A-OC, in the same amount as well, we have 19 of them at 470uF, the rest are on the back with the rest of the MOSFETs. POSCAP isn't just any normal tantalum capacitor, they are a brand name tantalum made by Panasonic, and they are supposed to have lower ESR and handle temperatures better than typical tantalum capacitors.
backvr.jpg

All in all a very well redone VRM, with Digital PWM and very nice component selection:
cpuvr.jpg

A closer look at the ICs:

Its not really an IC, but these dual connectors definitely can carry in some power.
dualinput.jpg

Now this is the VR for the first memory slots:
ramvr.jpg
The chip with the white dot is another IRF3750 3+2 phase PWM, really only 2+1 are being used, 2 for the two memory phases and the +1 for the QPI/VTT phases. the +1 is doubled by the same doublers as are used for the CPU VRM, and the 2 directly goto some new DrMOS type power stages. These are IRs pride and joy power stages, they are DrMOS direct competitors, these in particular offer 40A consistently at 400khz and with pretty high efficiency. IRF3553 40A power stages. These are also used for the other two memory slots and for the 2 System Agent phases. Each memory slot can get 40A a pop, that is a TON of power for a single stick of memory, almost impossible to pull half of that per DIMM, for comparison the UD5 has 1 of these for 4 DIMMs.

System Agent VR:
vccsavr.jpg
The second IR3570 3+2 phase PWM uses 2+2 of its phases, 2 for another two memory phases and 2 for the System Agent VR, basically the System Agent, and the twi memory VRs are clones. Just think about how much power is being given to the System Agent power plane, compare it to LGA1155 and its surprising upgrade. So is the spec, both QPI/VTT and System Agent voltage can each handle 24A and 1.4v during OC, that is what Intel claims.

Here is an up-close of these power stages:
vdimmab.jpg

PCI Lane Distribution:
backtrace.jpg
There are a total of 40 PCI-E 3.0 lanes, all of which can be used for the slots, and they are. The first 16X and second 16X(8X electrical) slots are directly wired to the CPU, the first 8X of the 3rd 16x slot is directly wired. The second 8X of pins of the 3rd 16X slot and the last 16X(8X electrical) slot have their lanes switched by NXP PCI-E 3.0 switches.
biosb.jpg

To carry in some good transition, we have the switches above, along with our dual BIOS. GIGABYTE's new UEFI and 3D BIOS need a large 64MBit ROM, and we have two of them.

it8275.jpg
That is the typical iTE8725 which is found on most GIGABYTE LGA1155 boards, on those boards it provided LLC and DVID, on this board it provides precision overvoltage or something along those lines.

ITE8728F provides PS/2:
it8728f.jpg
ITE8728F provides SuperIO capabilities like fan, voltage, and temp monitoring and fan control, if that wasn't enough GIGABYTE added a second SuperIO:
windbond.jpg
This Winbond SuperIO adds MUCH more fan and temperature monitoring, as well as the auto-OC button on the backpanel.
This motherboard has 7 fan headers!

Here are the dual clock generators:
clockgens.jpg

The mother of all chipsets, the PCH X79, the most extreme consumer chipset:
pchic.jpg

Dual Marvell SE9172 provide SATA6G, 4 extra ports with RAID:
marvells.jpg

Audio, well how about an upgrade!
alc898.jpg
ALC898 is a 110 dB SNR HD and Blu-Ray capable 7.1 audio codec. Its an upgrade from the ALC889.

Did you upgrade us again GIGABYTE? Indeed with Intel NIC:
wg82579v.jpg

Now this is the Intel PHY that was released earlier this year, and used on some LGA1155 boards. Now I heard a lot of people ask for this, and here it is.

Finally to finish up this section, let's do a 3 in one:
2frescoandpch.jpg
We see a new name to the motherboard USB 3.0 game, the Fresco Logic FL1009, two of these provide a total of 4 USB 3.0 ports. At least we know the DMI wont be clogged, but here I have a theory on why we see X79 boards with less USB 3.0, and here it is, people don't really have more than 2 USB 3.0 devices. personally I have one, and its a USB 3.0 stick, and its pretty cool. To be honest if it wasn't a review sample I would not have bought it, only because it costs too much. Personally I would like to see some more USB 3.0, luckily there are a lot of PCI-E 1X slots if in the future you decide to add more.

There is also in the picture above the only analog PWM on the board, a single phase Intersil used on all LGA1155 GIGABYTE boards, it controls the IR MOSFETs.

Included Software:
et61.png
et62.png
et63.png
et64.png
extremne.png
llc.png
switching.png

BIOS Walk Through:
bios1vv.jpg
fancyo.jpg
switching.jpg
advancefreq.png
fancontrol.png
freq.png
integrated.png
memlv.png
mitr.png
monitoringe.png
moremem.png
morepower.png
morevoltages.png
peripherals.png
powerk.png
savegf.png
voltages.png
setupif.jpg

Test Setup and the Board in Action!:
inactiopn.jpg
upclosed.jpg
closerk.jpg


Now Digital comes with new LLC, so here is how it works:
llc.png

I only had a few hours to OC, and it wasn't hard hitting 4.8ghz, but I had to leave C1E on for some reason. I was told BIOS engineers only have had a few weeks to work with the new boards, and they are working hard to get it in perfect condition. There are some minor issues, but for the most part there were no stupid boot loops, and OC recovery works (most of the time), and most everything works as usual. There are a few things that can be improved, and will definitely be, I do have a lot of hope, as so far its pretty neat BIOS. Very snappy, and keyboard is very responsive.
So this I hit pretty easily:
47ghz.png
But more to come along with an SBe OC guide! No worries people, it will be out soon, I just need some more time.

BUT there are some HUGE changes:
vAbsolute for VCC(Vcore) is 1.4v instead of 1.52v on SB? but SVID still goes to 1.52v.
VCCSA(system agent) has SVID.
VCCSA and VCCIO can go upto 1.4v comapred to 1.2v on SB
VCCSA seems to be the IMC voltage, so use it for memory OC instead of VCCIO.


BenchMarks:

testsystems.png
87877592.png
aidar.png
cineu.png
spih.png
unigine.png
vantage.png
wprimed.png
sisandra.png

Conclusion:
vrglam.jpg

All in all I was impressed by the BIOS, while I might enjoy the simplicity of non-UEFI, I do like all the control I have. Of course there is always room for improvement. What I really enjoyed were all the UD7's features. I used some low rated memory, but I was able to get some mixed kit up to 2400 in the BIOS, and I will see if I can get that to work and bench a bit. Of course I do have an OC guide on the way, and there should be some nice results in there. This board really is well decked out, and GIGABYTE has really given their whole lineup some polishing. They upgraded the audio, they upgraded the NIC, they upgraded the BIOS, and they upgraded the PWM and it seems like they gave all their boards the full treatment. The amount of spacing on this board is immense, and the feel of it reminds me of my X58A-OC which was sitting idle while I was messing around with its new younger brother the X79-UD7. The new Digital PWM and the new VRM components are very nice to say the least. I am not missing the 24-phase power, as this VRM seems to do the job not only well enough, but also packs one heck of a punch into 1/4 the area of the 24 phase while giving me more and better control over its aspects. LLC isn't broken, and I have faith in a lot of its controls.

pciglam.jpg

Now the board should have some more USB 3.0, and it can also have some extra DIMMs, and then it can also not be ATX-XL. Those three things will deter a lot of users from buying this board, and if you are one of them GIGABYTE and others have other boards to offer. This board is definitely a benching board, built for extreme overclocking, with a very nice feature set. Sure it might live on a test bench, but it can also live out its days inside a nice decked out case (an expensive ATX-XL case at that), and be a fully functioning member of the community. While it has that benching board feel of the X58A-OC it also feels like a 24/7 board like the Z68X-UD7. You might say its a mix of the two but with some extra spice thrown in. This really is how GIGABYTE's LGA1155 UD7 should have been, and I am just glad that GIGABYTE is eventually making the change. One thing that might throw a lot of new users off is the immense amount of PWM options in the BIOS, but there is hope as the 3D BIOS does offer much easier and managed control over the PWM settings. This board is how a proper high-end platform should be done, from its performance to its build, it really is one heck of a board. Its also really fun to work with as well.

x79ud7.jpg

MSRP prices:
Assassin2 $ 429.99 – available later
X79-UD7 $ 389.99 – available later
X79-UD5 $ 349.99 –
X79-UD3 $ 269.99 –

Also GIGABYTE is upgrading their warranty to 5 YEARS on the boards listed above!
X99 Main Rig
(10 items)
 
  
CPUMotherboardGraphicsRAM
Intel 5960X Extreme Edition @ 4.5GHz Always Changing VisonTek R9 290 G.Skill Ripjaws 4 16GB (4x4GB) DDR4 @ 3200MHz 
Hard DriveHard DriveHard DriveCooling
Samsung 128GB M.2 PCI-E 4x SSD Apotop 256GB SSD 1.82TB NAS Noctua NH-D15 with both fans 
OSPower
Win7 Pro Enermax 1000W 
  hide details  
Reply
X99 Main Rig
(10 items)
 
  
CPUMotherboardGraphicsRAM
Intel 5960X Extreme Edition @ 4.5GHz Always Changing VisonTek R9 290 G.Skill Ripjaws 4 16GB (4x4GB) DDR4 @ 3200MHz 
Hard DriveHard DriveHard DriveCooling
Samsung 128GB M.2 PCI-E 4x SSD Apotop 256GB SSD 1.82TB NAS Noctua NH-D15 with both fans 
OSPower
Win7 Pro Enermax 1000W 
  hide details  
Reply
post #2 of 15
I have the X58A-OC this board looks exactly the same tongue.gif
very sexy looking board~
Monster X99 Build
(19 items)
 
Workstation
(14 items)
 
 
CPUMotherboardGraphicsRAM
Intel Xeon W3520  X58 Chipset PNY Nvidia Quadro 4000 15GB ECC DDR3  
Hard DriveHard DriveCoolingOS
Seagate Barracuda 250GB NCQ Western Digital Caviar Black 640GB Stock Windows 7 Professional x64 
MonitorKeyboardPowerCase
Dell U2711 Stock 475W 80 Plus Bronze HP 
MouseAudio
Stock Realtek 
  hide details  
Reply
Monster X99 Build
(19 items)
 
Workstation
(14 items)
 
 
CPUMotherboardGraphicsRAM
Intel Xeon W3520  X58 Chipset PNY Nvidia Quadro 4000 15GB ECC DDR3  
Hard DriveHard DriveCoolingOS
Seagate Barracuda 250GB NCQ Western Digital Caviar Black 640GB Stock Windows 7 Professional x64 
MonitorKeyboardPowerCase
Dell U2711 Stock 475W 80 Plus Bronze HP 
MouseAudio
Stock Realtek 
  hide details  
Reply
post #3 of 15

Thanks for the review Sin, got a UD5 review coming up?

Gene-Z Dedi
(7 items)
 
Captain America
(6 items)
 
 
CPUMotherboardRAMHard Drive
i7 2600k @ 5.2 Ghz Asus Maximus IV Gene-Z Gskill 2133 4GB Caviar Black 
CoolingOSPower
Corsair H100 Arch x64 OCZ 650 Watt 
CPUCPUMotherboardGraphics
Intel Xeon E5-2650 Intel Xeon E5-2650 ASUS Z9PE-D8 WS XFX 6870 
RAMOS
32 GB Samsung Arch Nix 
  hide details  
Reply
Gene-Z Dedi
(7 items)
 
Captain America
(6 items)
 
 
CPUMotherboardRAMHard Drive
i7 2600k @ 5.2 Ghz Asus Maximus IV Gene-Z Gskill 2133 4GB Caviar Black 
CoolingOSPower
Corsair H100 Arch x64 OCZ 650 Watt 
CPUCPUMotherboardGraphics
Intel Xeon E5-2650 Intel Xeon E5-2650 ASUS Z9PE-D8 WS XFX 6870 
RAMOS
32 GB Samsung Arch Nix 
  hide details  
Reply
post #4 of 15
So would you say the LGA 2011 to be more serverside/workstation platform?
Benchmarks showed no improvement in memory bandwidth... isnt that what was so special about this release?
Great review btw. repped.
Ruby
(16 items)
 
  
CPUMotherboardGraphicsRAM
[Intel] i7 2700k HT - 5.0ghz; 1.42v [ASRock] Fatal1ity z68 Proffesional Gen3 [Sapphire] HD 7970's CrossfireX @ 1200/1700mhz ... [G.Skill] RipjawsX CL9D 2x4GB; XMP 2133mhz; 9-1... 
Hard DriveOptical DriveCoolingOS
[OCZ] Vertex 3 + [WD] VelociRaptor 600gb Gen3 +... [SONY] Optiarc DVD+RW Combo [EK] Res/Rad/Pump + [Koolance] CPU-360 block + ... [Microsoft] Windows 7 Ultimate x64 
MonitorKeyboardPowerCase
[Samsung] 120hz 3D 27" LED 2ms -S27A950D- [Logitech] G19 [Antec] Quattro 1200w OC Edition [Antec] Dark Fleet 85 
MouseMouse PadAudioAudio
[Logitech] G500 [Razor] Vespula [Asus] Xonar HDAV 7.1 THX DTS [Logitech] Z-5500 speakers 
  hide details  
Reply
Ruby
(16 items)
 
  
CPUMotherboardGraphicsRAM
[Intel] i7 2700k HT - 5.0ghz; 1.42v [ASRock] Fatal1ity z68 Proffesional Gen3 [Sapphire] HD 7970's CrossfireX @ 1200/1700mhz ... [G.Skill] RipjawsX CL9D 2x4GB; XMP 2133mhz; 9-1... 
Hard DriveOptical DriveCoolingOS
[OCZ] Vertex 3 + [WD] VelociRaptor 600gb Gen3 +... [SONY] Optiarc DVD+RW Combo [EK] Res/Rad/Pump + [Koolance] CPU-360 block + ... [Microsoft] Windows 7 Ultimate x64 
MonitorKeyboardPowerCase
[Samsung] 120hz 3D 27" LED 2ms -S27A950D- [Logitech] G19 [Antec] Quattro 1200w OC Edition [Antec] Dark Fleet 85 
MouseMouse PadAudioAudio
[Logitech] G500 [Razor] Vespula [Asus] Xonar HDAV 7.1 THX DTS [Logitech] Z-5500 speakers 
  hide details  
Reply
post #5 of 15
Nice reivew, glad to hear the 5 year warranty. I will have my Assassin 2 tomorrow..
Wubzy 2.0
(16 items)
 
  
CPUMotherboardGraphicsRAM
Ryzen7 1800x Asus Crosshair VI  EVGA GTX 1080 FTW 4x 8GB Corsair Domminator DDR4 3000 
Hard DriveHard DriveHard DriveCooling
Samsung 960 Pro  Intel 540  WD Red 2TB HDD Corsair H110i 
OSMonitorKeyboardPower
Windows 10 Pro Dell U3415W Corsair K90 Keyboard Corsair AX860i 
CaseMouse
Corsair 400C Logitech G700s 
  hide details  
Reply
Wubzy 2.0
(16 items)
 
  
CPUMotherboardGraphicsRAM
Ryzen7 1800x Asus Crosshair VI  EVGA GTX 1080 FTW 4x 8GB Corsair Domminator DDR4 3000 
Hard DriveHard DriveHard DriveCooling
Samsung 960 Pro  Intel 540  WD Red 2TB HDD Corsair H110i 
OSMonitorKeyboardPower
Windows 10 Pro Dell U3415W Corsair K90 Keyboard Corsair AX860i 
CaseMouse
Corsair 400C Logitech G700s 
  hide details  
Reply
post #6 of 15
Thread Starter 
Quote:
Originally Posted by JedixJarf View Post

Thanks for the review Sin, got a UD5 review coming up?
I think I might, Im not sure. Next i have coming up is a full OC guide, and then its a G1 Assassin 2 review and then its a UD5 review I think, but not 100% sure.
Quote:
Originally Posted by Denim-187 View Post

So would you say the LGA 2011 to be more serverside/workstation platform?
Benchmarks showed no improvement in memory bandwidth... isnt that what was so special about this release?
Great review btw. repped.

Its deffinitly fun to OC and bench, there are a few benchmarks that SBe will own in, like 3dmark11. Um there is a lot of memory improvement, just depends on what program you use, sandra or aida.
X99 Main Rig
(10 items)
 
  
CPUMotherboardGraphicsRAM
Intel 5960X Extreme Edition @ 4.5GHz Always Changing VisonTek R9 290 G.Skill Ripjaws 4 16GB (4x4GB) DDR4 @ 3200MHz 
Hard DriveHard DriveHard DriveCooling
Samsung 128GB M.2 PCI-E 4x SSD Apotop 256GB SSD 1.82TB NAS Noctua NH-D15 with both fans 
OSPower
Win7 Pro Enermax 1000W 
  hide details  
Reply
X99 Main Rig
(10 items)
 
  
CPUMotherboardGraphicsRAM
Intel 5960X Extreme Edition @ 4.5GHz Always Changing VisonTek R9 290 G.Skill Ripjaws 4 16GB (4x4GB) DDR4 @ 3200MHz 
Hard DriveHard DriveHard DriveCooling
Samsung 128GB M.2 PCI-E 4x SSD Apotop 256GB SSD 1.82TB NAS Noctua NH-D15 with both fans 
OSPower
Win7 Pro Enermax 1000W 
  hide details  
Reply
post #7 of 15
Interested to know how the UD7 compares to the G1.ASSASSIN 2 in overclocking
post #8 of 15
Thanks for the review dude
post #9 of 15
Thread Starter 
Hey yea ill compare the two i have both boards. Of course the BIOSes are very early, so I expect OC to improve.
X99 Main Rig
(10 items)
 
  
CPUMotherboardGraphicsRAM
Intel 5960X Extreme Edition @ 4.5GHz Always Changing VisonTek R9 290 G.Skill Ripjaws 4 16GB (4x4GB) DDR4 @ 3200MHz 
Hard DriveHard DriveHard DriveCooling
Samsung 128GB M.2 PCI-E 4x SSD Apotop 256GB SSD 1.82TB NAS Noctua NH-D15 with both fans 
OSPower
Win7 Pro Enermax 1000W 
  hide details  
Reply
X99 Main Rig
(10 items)
 
  
CPUMotherboardGraphicsRAM
Intel 5960X Extreme Edition @ 4.5GHz Always Changing VisonTek R9 290 G.Skill Ripjaws 4 16GB (4x4GB) DDR4 @ 3200MHz 
Hard DriveHard DriveHard DriveCooling
Samsung 128GB M.2 PCI-E 4x SSD Apotop 256GB SSD 1.82TB NAS Noctua NH-D15 with both fans 
OSPower
Win7 Pro Enermax 1000W 
  hide details  
Reply
post #10 of 15
I was leaning towards the UD5 but since UD7 only $30 more then it makes it harder.

I want to know more about the new NIC, Audio, and Marvell.

I often use a second OS and I usually always by gigabyte for this reason. But this is all new
Edited by UNOE - 11/15/11 at 7:01pm
 
4x r290's
(9 items)
 
3x 7970's
(16 items)
 
CPUMotherboardGraphicsGraphics
i7 3930K 4.8Ghz offset ASUS X79 Rampage IV Extreme GTX 780 with EK waterblock GTX 780 with EK waterblock 
GraphicsRAMHard DriveHard Drive
GTX 780 with EK waterblock  Samsung 16GB (4x4gb) 2400Mhz 10-12-12-31-1t @ 1... 256GB Samsung 950 Pro 256GB Samsung 840 Pro 
CoolingCoolingOSMonitor
RX360, EX360, EX360, and 480 Rad's XSPC Raystorm CPU Block Dual boot (other unnamed OS) and Win8 Pro QNIX QX2710 27" 2560x1440 @ 112hz 
KeyboardPowerCase
Corsair K90 Corsair AX1200 Corsair 700D Modded w/ External Radiators 
CPUMotherboardGraphicsRAM
Intel i5 3570K GA-Z77X-UD3H 4x R9 290's 8GB 1600Mhz 
Hard DriveOSPowerCase
1TB Hard Drive Win8 Corsair Dual PSU - AX1200 and HX650 Open Case 
Other
Thee 16x Risers and One 1x Riser 
CPUMotherboardGraphicsRAM
i7 3930K 5Ghz Bench ASUS X79 Rampage IV Extreme 3x AMD 7970's w/ EK water blocks Samsung 16GB (4x4gb) 2400Mhz 10-12-12-31-1t @ 1... 
Hard DriveCoolingCoolingMonitor
128GB Samsung 830  RX360, RX240, EX360 XSPC Raystorm CPU Block QNIX QX2710 27" 2560x1440 @ 114hz 
KeyboardPowerCase
Corsair K90 Corsair AX760i Corsair 700D Modded w/ External Radiators 
  hide details  
Reply
 
4x r290's
(9 items)
 
3x 7970's
(16 items)
 
CPUMotherboardGraphicsGraphics
i7 3930K 4.8Ghz offset ASUS X79 Rampage IV Extreme GTX 780 with EK waterblock GTX 780 with EK waterblock 
GraphicsRAMHard DriveHard Drive
GTX 780 with EK waterblock  Samsung 16GB (4x4gb) 2400Mhz 10-12-12-31-1t @ 1... 256GB Samsung 950 Pro 256GB Samsung 840 Pro 
CoolingCoolingOSMonitor
RX360, EX360, EX360, and 480 Rad's XSPC Raystorm CPU Block Dual boot (other unnamed OS) and Win8 Pro QNIX QX2710 27" 2560x1440 @ 112hz 
KeyboardPowerCase
Corsair K90 Corsair AX1200 Corsair 700D Modded w/ External Radiators 
CPUMotherboardGraphicsRAM
Intel i5 3570K GA-Z77X-UD3H 4x R9 290's 8GB 1600Mhz 
Hard DriveOSPowerCase
1TB Hard Drive Win8 Corsair Dual PSU - AX1200 and HX650 Open Case 
Other
Thee 16x Risers and One 1x Riser 
CPUMotherboardGraphicsRAM
i7 3930K 5Ghz Bench ASUS X79 Rampage IV Extreme 3x AMD 7970's w/ EK water blocks Samsung 16GB (4x4gb) 2400Mhz 10-12-12-31-1t @ 1... 
Hard DriveCoolingCoolingMonitor
128GB Samsung 830  RX360, RX240, EX360 XSPC Raystorm CPU Block QNIX QX2710 27" 2560x1440 @ 114hz 
KeyboardPowerCase
Corsair K90 Corsair AX760i Corsair 700D Modded w/ External Radiators 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel Motherboards
Overclock.net › Forums › Intel › Intel Motherboards › Ultimate X79-UD7 Review w/ 3960K (BIOS Walkthrough, Digital PWM Explained, Benchmarks)